Browsing by Subject "Schottky barrier diodes"

Now showing 1 - 20 of 28

Open Access
1.3 μm GaAs based resonant cavity enhanced Schottky barrier internal photoemission photodetector
(IEEE, Piscataway, NJ, United States, 2000) Necmi, B.; Kimukin, I.; Özbay, Ekmel; Tuttle, G.
GaAs based photodetectors operating at 1.3 μm that depend on internal photoemission as the absorption mechanism were fabricated. Quantum efficiency (QE) was increased using resonant cavity enhancement (RCE) effect.
Open Access
100-GHz resonant cavity enhanced Schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1998) Onat, B. M.; Gökkavas, M.; Özbay, Ekmel; Ata, E. P.; Towe, E.; Ünlü, M. S.
Resonant cavity enhanced (RCE) photodiodes are promising candidates for applications in optical communications and interconnects where ultrafast high-efficiency detection is desirable. We have designed and fabricated RCE Schottky photodiodes in the (Al, In) GaAs material system for 900-nm wavelength. The observed temporal response with 10-ps pulsewidth was limited by the measurement setup and a conservative estimation of the bandwidth corresponds to more than 100 GHz. A direct comparison of RCE versus conventional detector performance was performed by high speed measurements under optical excitation at resonant wavelength (895 nm) and at 840 nm where the device functions as a single-pass conventional photodiode. A more than two-fold bandwidth enhancement with the RCE detection scheme was demonstrated.
Open Access
45 GHz bandwidth-efficiency resonant cavity enhanced ITO-Schottky photodiodes
(OSA, 2001) Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan; Özbay, Ekmel; Gökkavas, M.; Ünlü, M. S.
We demonstrated high-performance resonant cavity enhanced ITO-Schottky photodiodes. We achieved a peak efficiency of 75% around 820 nm with a 3-dB bandwidth of 60 GHz resulting in a bandwidth-efficiency product of 45 GHz.
Open Access
45-GHz bandwidth-efficiency resonant-cavity-enhanced ITO-Schottky photodiodes
(IEEE, 2001) Bıyıklı, Necmi; Kimukin, I.; Aytür, O.; Gökkavas, M.; Ünlü, M. S.; Özbay, Ekmel
High-speed Schottky photodiodes suffer from low efficiency mainly due to the thin absorption layers and the semitransparent Schottky-contact metals. We have designed, fabricated and characterized high-speed and high-efficiency AlGaAs-GaAs-based Schottky photodiodes using transparent indium-tin-oxide Schottky contact material and resonant cavity enhanced detector structure. The measured devices displayed resonance peaks around 820 nm with 75% maximum peak efficiency and an experimental setup limited temporal response of 11 ps pulsewidth. The resulting 45-GHz bandwidth-efficiency product obtained from these devices corresponds to the best performance reported to date for vertically illuminated Schottky photodiodes.
Open Access
Current transport mechanisms and trap state investigations in (Ni/Au)-AlN/GaN Schottky barrier diodes
(Elsevier, 2010-10-13) Arslan, E.; Bütün, S.; Şafak, Y.; Çakmak, H.; Yu, H.; Özbay, Ekmel
The current transport mechanisms in (Ni/Au)-AlN/GaN Schottky barrier diodes (SBDs) were investigated by the use of current-voltage characteristics in the temperature range of 80-380 K. In order to determine the true current transport mechanisms for (Ni/Au)-AlN/GaN SBDs, by taking the Js(tunnel), E 0, and Rs as adjustable fit parameters, the experimental J-V data were fitted to the analytical expressions given for the current transport mechanisms in a wide range of applied biases and at different temperatures. Fitting results show the weak temperature dependent behavior in the saturation current and the temperature independent behavior of the tunneling parameters in this temperature range. Therefore, it has been concluded that the mechanism of charge transport in (Ni/Au)-AlN/GaN SBDs, along the dislocations intersecting the space charge region, is performed by tunneling. In addition, in order to analyze the trapping effects in (Ni/Au)-AlN/GaN SBDs, the capacitance-voltage (C-V) and conductance-voltage (G/ω-V) characteristics were measured in the frequency range 0.7-50 kHz. A detailed analysis of the frequency-dependent capacitance and conductance data was performed, assuming the models in which traps are located at the heterojunction interface. The density (Dt) and time constants (τt) of the trap states have been determined as a function of energy separation from the conduction-band edge (Ec - Et) as Dt≅ (5-8)×10 12eV-1 cm-2andτt≅(43-102) μs, respectively.
Open Access
Current-Transport mechanisms in the AlInN/AlN/GaN single-channel and AlInN/AlN/GaN/AlN/GaN double-channel heterostructures
(Elsevier, 2013) Arslan, E.; Turan, S.; Gökden, S.; Teke, A.; Özbay, Ekmel
Current-transport mechanisms were investigated in Schottky contacts on AlInN/AlN/GaN single channel (SC) and AlInN/AlN/GaN/AlN/GaN double channel (DC) heterostructures. A simple model was adapted to the current-transport mechanisms in DC heterostructure. In this model, two Schottky diodes are in series: one is a metal-semiconductor barrier layer (AIInN) Schottky diode and the other is an equivalent Schottky diode, which is due to the heterojunction between the AlN and GaN layer. Capacitance-voltage studies show the formation of a two-dimensional electron gas at the AlN/GaN interface in the SC and the first AlN/GaN interface from the substrate direction in the DC. In order to determine the current mechanisms for SC and DC heterostructures, we fit the analytical expressions given for the tunneling current to the experimental current-voltage data over a wide range of applied biases as well as at different temperatures. We observed a weak temperature dependence of the saturation current and a fairly small dependence on the temperature of the tunneling parameters in this temperature range. At both a low and medium forward-bias voltage values for Schottky contacts on AlInN/AlN/GaN/AlN/GaN DC and AlInN/AlN/GaN SC heterostructures, the data are consistent with electron tunneling to deep levels in the vicinity of mixed/screw dislocations in the temperature range of 80-420 K.
Open Access
Design, fabrication and characterization of high-performance solarblind AlGaN photodetectors
(SPIE, 2005) Özbay, Ekmel
Design, fabrication, and characterization of high-performance AlxGal-xN-based photodetectors for solar-blind applications are reported. AlxGal-xN heterostructures were designed for Schottky, p-i-n, and metal-semiconductor-metal (MSM) photodiodes. The resulting solar-blind AlGaN detectors exhibited low dark current, high detectivity, and high bandwidth.
Open Access
Electrical characteristics of β-Ga2O3 thin films grown by PEALD
(Elsevier, 2014) Altuntas, H.; Donmez, I.; Ozgit Akgun, C.; Bıyıklı, Necmi
In this work, 7.5 nm Ga2O3 dielectric thin films have been deposited on p-type (1 1 1) silicon wafer using plasma enhanced atomic layer deposition (PEALD) technique. After the deposition, Ga2O 3 thin films were annealed under N2 ambient at 600, 700, and 800 C to obtain β-phase. The structure and microstructure of the β-Ga2O3 thin films was carried out by using grazing-incidence X-ray diffraction (GIXRD). To show effect of annealing temperature on the microstructure of β-Ga2O3 thin films, average crystallite size was obtained from the full width at half maximum (FWHM) of Bragg lines using the Scherrer formula. It was found that crystallite size increased with increasing annealing temperature and changed from 0.8 nm to 9.1 nm with annealing. In order to perform electrical characterization on the deposited films, Al/β-Ga2O3/p-Si metal-oxide- semiconductor (MOS) type Schottky barrier diodes (SBDs) were fabricated using the β-Ga2O3 thin films were annealed at 800 C. The main electrical parameters such as leakage current level, reverse breakdown voltage, series resistance (RS), ideality factor (n), zero-bias barrier height (Bo), and interface states (NSS) were obtained from the current-voltage (I-V) and capacitance-voltage (C-V) measurements at room temperature. The RS values were calculated by using Cheung methods. The energy density distribution profile of the interface states as a function of (ESS-EV) was obtained from the forward bias I-V measurements by taking bias dependence of ideality factor, effective barrier height (e), and RS into account. Also using the Norde function and C-V technique, e values were calculated and cross-checked. Results show that β-Ga2O3 thin films deposited by PEALD technique at low temperatures can be used as oxide layer for MOS devices and electrical properties of these devices are influenced by some important parameters such as NSS, RS, and β-Ga2O3 oxide layer.
Open Access
Electrical characterization of MS and MIS structures on AlGaN/AlN/GaN heterostructures
(ELSEVIER, 2010) Arslan, E.; Bütün, S.; Şafak, Y.; Uslu, H.; Tascioglu I.; Altindal, S.; Özbay, Ekmel
The forward and reverse bias I-V, C-V, and G/ω-V characteristics of (Ni/Au) Schottky barrier diodes (SBDs) on the Al 0.22Ga 0.78N/AlN/GaN high-electron-mobility-transistor (HEMTs) without and with SiN x insulator layer were measured at room temperature in order to investigate the effects of the insulator layer (SiN x) on the main electrical parameters such as the ideality factor (n), zero-bias barrier height ( B0), series resistance (R s), interface-state density (N ss). The energy density distribution profiles of the N ss were obtained from the forward bias I-V characteristics by taking into account the voltage dependence of the effective barrier height ( e) and ideality factor (n V) of devices. In addition, the N ss as a function of E c-E ss was determined from the low-high frequency capacitance methods. It was found that the values of N ss and R s in SBD HEMTs decreases with increasing insulator layer thickness.
Open Access
Electronic properties of polypyrrole/polyindene composite/metal junctions
(Elsevier, 1997) Bozkurt, A.; Ercelebi, C.; Toppare, L.
Junction properties between conducting polymer composites of polypyrrole/polyindene (PPy/PIn) with different conductivities and metals like Pt, Au, Al and In have been investigated. Rectifying junctions were observed for low work function metals, In and Al; however, high work function metals, Pt and Au, were observed to form ohmic contacts to PPy/PIn composite in the sandwich geometry. The rectifying behavior of the metal/composite/Pt junctions improved when the conductivity of the composite was decreased from 1 to 0.01 S/cm. Using the ideal Schottky theory various junction parameters have been determined. All planar junctions were ohmic regardless of the conductivities of the samples.
Open Access
Energetics and Electronic Structures of Individual Atoms Adsorbed on Carbon Nanotubes
(American Chemical Society, 2004) Durgun, Engin; Dag, S.; Çıracı, Salim; Gülseren, O.
The adsorption of individual atoms on the semiconducting and metallic single-walled carbon nanotubes (SWNT) has been investigated by using the first principles pseudopotential plane wave method within density functional theory. The stable adsorption geometries and binding energies have been determined for a large number of foreign atoms ranging from alkali and simple metals to the transition metals and group IV elements. We have found that the character of the bonding and associated physical properties strongly depends on the type of adsorbed atoms, in particular, on their valence electron structure. Our results indicate that the properties of SWNTs can be modified by the adsorbed foreign atoms. Although the atoms of good conducting metals, such as Zn, Cu, Ag, and Au, form very weak bonds, transition-metal atoms such as Ti, Sc, Nb, and Ta and group IV elements C and Si are adsorbed with a relatively high binding energy. Owing to the curvature effect, these binding energies are larger than the binding energies of the same atoms on the graphite surface. We have showed that the adatom carbon can form strong and directional bonds between two SWNTs. These connects can be used to produce nanotube networks or grids. Most of the adsorbed transition-metal atoms excluding Ni, Pd, and Pt have a magnetic ground state with a significant magnetic moment. Our results suggest that carbon nanotubes can be functionalized in different ways by their coverage with different atoms, showing interesting applications such as ID nanomagnets or nanoconductors, conducting connects, and so forth.
Open Access
Fabrication of high-speed resonant cavity enhanced schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1997-05) Özbay, Ekmel; Islam, M. S.; Onat, B.; Gökkavas, M.; Aytür, O.; Tuttle, G.; Towe, E.; Henderson, R. H.; Ünlü, M. S.
We report the fabrication and testing of a GaAs-based high-speed resonant cavity enhanced (RCE) Schottky photodiode. The top-illuminated RCE detector is constructed by integrating a Schottky contact, a thin absorption region (In0.8Ga0.92As) and a distributed AlAs-GaAs Bragg mirror. The Schottky contact metal serves as a high-reflectivity top mirror in the RCE detector structure. The devices were fabricated by using a microwave-compatible fabrication process. The resulting spectral photo response had a resonance around 895 nm, in good agreement with our simulations. The full-width-at-half-maximum (FWHM) was 15 nm, and the enhancement factor was in excess of 6. The photodiode had an experimental setup limited temporal response of 18 ps FWHM, corresponding to a 3-dB bandwidth of 20 GHz.
Open Access
Forward tunneling current in Pt/p-InGaN and Pt/n-InGaN Schottky barriers in a wide temperature range
(Elsevier, 2012-07-27) Arslan, E.; Çakmak, H.; Özbay, Ekmel
The current-transport mechanisms of the Pt contacts on p-InGaN and n-InGaN were investigated in a wide temperature range (80-360 K) and in the forward bias regime. It was found that the ideality factor (n) values and Schottky barrier heights (SBHs), as determined by thermionic emission (TE), were a strong function of temperature and Φb0 show the unusual behavior of increasing linearly with an increase in temperature from 80 to 360 K for both Schottky contacts. The tunneling saturation ( JTU(0)) and tunneling parameters (E 0) were calculated for both Schottky contacts. We observed a weak temperature dependence of the saturation current and a fairly small dependence on the temperature of the tunneling parameters in this temperature range. The results indicate that the dominant mechanism of the charge transport across the Pt/p-InGaN and Pt/n-InGaN Schottky contacts are electron tunneling to deep levels in the vicinity of mixed/screw dislocations in the temperature range of 80-360 K.
Open Access
Gain and temporal response of AlGaN solar-blind avalanche photodiodes: An ensemble Monte Carlo analysis
(A I P Publishing LLC, 2003) Sevik, C.; Bulutay, C.
A study was performed on temporal and gain response of AlGaN solar-blind avalanche photodiodes (APD). The ensemble Monte Carlo method was used for the purpose. It was found that without any fitting parameters, reasonable agreement was obtained with the published measurements for a GaN APD.
Open Access
High bandwidth-efficiency solar-blind AlGaN Schottky photodiodes with low dark current
(Pergamon Press, 2005-01) Tut, T.; Bıyıklı, Necmi; Kimukin, I.; Kartaloglu, T.; Aytur, O.; Unlu, M. S.; Özbay, Ekmel
Al0.38Ga0.62N/GaN heterojunction solar-blind Schottky photodetectors with low dark current, high responsivity, and fast pulse response were demonstrated. A five-step microwave compatible fabrication process was utilized to fabricate the devices. The solarblind detectors displayed extremely low dark current values: 30 μm diameter devices exhibited leakage current below 3fA under reverse bias up to 12V. True solar-blind operation was ensured with a sharp cut-off around 266nm. Peak responsivity of 147mA/W was measured at 256nm under 20V reverse bias. A visible rejection more than 4 orders of magnitude was achieved. The thermally-limited detectivity of the devices was calculated as 1.8 × 1013cm Hz1/2W-1. Temporal pulse response measurements of the solar-blind detectors resulted in fast pulses with high 3-dB bandwidths. The best devices had 53 ps pulse-width and 4.1 GHz bandwidth. A bandwidth-efficiency product of 2.9GHz was achieved with the AlGaN Schottky photodiodes. © 2004 Elsevier Ltd. All rights reserved.
Open Access
High-performance ALGaN-based visible-blind resonant cavity enhanced Schottky photodiodes
(Materials Research Society, 2003-04) Kimukin, İbrahim; Bıyıklı, Necmi; Kartaloğlu, Tolga; Aytür, Orhan; Özbay, Ekmel
We have designed, fabricated and tested resonant cavity enhanced visible-blind AlGaN-based Schottky photodiodes. The bottom mirror of the resonant cavity was formed with a 20 pair AlN/AlGaN Bragg mirror. The devices were fabricated using a microwave compatible fabrication process. Au and indium-tin-oxide (ITO) thin films were used for Schottky contact formation. ITO and Au-Schottky devices exhibited resonant peaks with 0.153 A/W and 0.046 A/W responsivity values at 337 nm and 350 nm respectively. Temporal high-speed measurements at 357 nm resulted in fast pulse responses with pulse widths as short as 77 ps. The fastest UV detector had a 3-dB bandwidth of 780 MHz.
Open Access
High-performance solar-blind AlGaN photodetectors
(IEEE, 2004) Özbay, Ekmel; Bıyıklı, Necmi; Kimukin, İbrahim; Tut, Turgut; Kartaloğlu, Tolga; Aytür, Orhan
High-performance aluminum gallium nitride (AlGaN)-based solar-blind (SB) photodetectors were demonstrated using different device structures. The Al x-Ga1-xN layers structure were grown by metalorganic chemical vapor deposition (MOCVD) on sapphire structures. n+ and p+ ohmic contacts on GaN were formed with non-annealed titanium (Ti)/aluminum (Al) and nickel (Ni)/ gold (Au) alloys. Spectral UV photoresponse measurements confirmed the solar-blind response of the devices.
Open Access
High-performance solar-blind AlGaN photodetectors
(SPIE, 2005) Özbay, Ekmel; Tut, Turgut; Bıyıklı, N.
Design, fabrication, and characterization of high-performance Al xGa1-xN-based photodetectors for solar-blind applications are reported. AlxGa1-xN heterostructures were designed for Schottky, p-i-n, and metal-semiconductor-metal (MSM) photodiodes. The solar-blind photodiode samples were fabricated using a microwave compatible fabrication process. The resulting devices exhibited extremely low dark currents. Below 3 fA leakage currents at 6 V and 12 V reverse bias were measured on p-i-n and Schottky photodiode samples respectively. The excellent current-voltage (I-V) characteristics led to a detectivity performance of 4.9×1014 cmHz1/2W-1. The MSM devices exhibited photoconductive gain, while Schottky and p-i-n samples displayed 0.15 A/W and 0.11 A/W peak responsivity values at 267 nm and 261 nm respectively. All samples displayed true solar-blind response with cut-off wavelengths smaller than 280 nm. A visible rejection of 4×104 was achieved with Schottky detector samples. High speed measurements at 267 nm resulted in fast pulse responses with >GHz bandwidths. The fastest devices were MSM photodiodes with a maximum 3-dB bandwidth of 5.4 GHz.
Open Access
High-performance solar-blind AlGaN Schottky photodiodes
(Materials Research Society, 2003) Bıyıklı, Necmi; Kartaloglu, T.; Aytur, O.; Kimukin, I.; Özbay, Ekmel
High-performance solar-blind AlGaN-based Schottky photodiodes have been demonstrated. The detectors were fabricated on MOCVD-grown AlGaN/GaN heterostructures using a microwave-compatible fabrication process. Current-voltage, spectral responsivity, noise, and high-speed characteristics of the detectors were measured and analyzed. Dark currents lower than 1 pA at bias voltages as high as 30 V were obtained. True solar-blind detection was achieved with a cut-off wavelength lower than 266 nm. A peak device responsivity of 78 mA/W at 250 nm was measured under 15 V reverse bias. A visible rejection of more than 4 orders of magnitude was observed. The solar-blind photodiodes exhibited noise densities below the measurement setup noise floor of 3×10 -29 A 2/Hz around 10 KHz. High-speed measurements at the solar-blind wavelength of 267 nm resulted in 3-dB bandwidths as high as 870 MHz.
Open Access
High-speed 1.3 μm GaAs internal photoemission resonant cavity enhanced photodetector
(IEEE, 2000) Kimukin, İbrahim; Özbay, Ekmel; Bıyıklı, Necmi; Kartaloğlu, Tolga; Aytür, Orhan; Tuttle, G.
Resonant cavity enhanced (RCE) photodetectors offer the possibility of overcoming the low quantum efficiency limitation of conventional photodetectors. The RCE detectors are based on the enhancement of the optical field within a Fabry-Perot resonator. The increased field allows the use of a thin absorbing layer, which minimizes the transit time of the photogenerated carriers without hampering the quantum efficiency. Recently, we fabricated high-speed RCE p-i-n and Schottky photodetectors, where a 90% quantum efficiency along with a 3-dB bandwidth of 50 GHz has been reported. We used the transfer matrix method to design the epilayer structure and to simulate the optical properties of the photodiode. The samples were fabricated by a microwave-compatible process and high-speed measurements were made with an optical parametric oscillator.