Browsing by Subject "Photodiodes"

Now showing 1 - 20 of 43

Open Access
100-GHz resonant cavity enhanced Schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1998) Onat, B. M.; Gökkavas, M.; Özbay, Ekmel; Ata, E. P.; Towe, E.; Ünlü, M. S.
Resonant cavity enhanced (RCE) photodiodes are promising candidates for applications in optical communications and interconnects where ultrafast high-efficiency detection is desirable. We have designed and fabricated RCE Schottky photodiodes in the (Al, In) GaAs material system for 900-nm wavelength. The observed temporal response with 10-ps pulsewidth was limited by the measurement setup and a conservative estimation of the bandwidth corresponds to more than 100 GHz. A direct comparison of RCE versus conventional detector performance was performed by high speed measurements under optical excitation at resonant wavelength (895 nm) and at 840 nm where the device functions as a single-pass conventional photodiode. A more than two-fold bandwidth enhancement with the RCE detection scheme was demonstrated.
Open Access
45 GHz bandwidth-efficiency resonant cavity enhanced ITO-Schottky photodiodes
(OSA, 2001) Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan; Özbay, Ekmel; Gökkavas, M.; Ünlü, M. S.
We demonstrated high-performance resonant cavity enhanced ITO-Schottky photodiodes. We achieved a peak efficiency of 75% around 820 nm with a 3-dB bandwidth of 60 GHz resulting in a bandwidth-efficiency product of 45 GHz.
Open Access
45-GHz bandwidth-efficiency resonant-cavity-enhanced ITO-Schottky photodiodes
(IEEE, 2001) Bıyıklı, Necmi; Kimukin, I.; Aytür, O.; Gökkavas, M.; Ünlü, M. S.; Özbay, Ekmel
High-speed Schottky photodiodes suffer from low efficiency mainly due to the thin absorption layers and the semitransparent Schottky-contact metals. We have designed, fabricated and characterized high-speed and high-efficiency AlGaAs-GaAs-based Schottky photodiodes using transparent indium-tin-oxide Schottky contact material and resonant cavity enhanced detector structure. The measured devices displayed resonance peaks around 820 nm with 75% maximum peak efficiency and an experimental setup limited temporal response of 11 ps pulsewidth. The resulting 45-GHz bandwidth-efficiency product obtained from these devices corresponds to the best performance reported to date for vertically illuminated Schottky photodiodes.
Open Access
Design and optimization of high-speed resonant cavity enhanced Schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1999-02) Gökkavas, M.; Onat, B. M.; Özbay, Ekmel; Ata, E. P.; Xu, J.; Towe, E.; Ünlü, M. S.
Resonant cavity enhanced (RCE) photodiodes (PD's) are promising candidates for applications in optical communications and interconnects where high-speed high-efficiency photodetection is desirable. In RCE structures, the electrical properties of the photodetector remain mostly unchanged; however, the presence of the microcavity causes wavelength selectivity accompanied by a drastic increase of the optical field at the resonant wavelengths. The enhanced optical field allows to maintain a high efficiency for faster transit-time limited PD's with thinner absorption regions. The combination of an RCE detection scheme with Schottky PD's allows for the fabrication of high-performance photodetectors with relatively simple material structures and fabrication processes. In top-illuminated RCE Schottky PD's, a semitransparent Schottky contact can also serve as the top reflector of the resonant cavity. We present theoretical and experimental results on spectral and high-speed properties of GaAs-AlAs-InGaAs RCE Schottky PD's designed for 900-nm wavelength.
Open Access
Effect of the passivation layer on the noise characteristics of mid-wave-infrared InAs / GaSb superlattice photodiodes
(IEEE, 2012) Tansel, T.; Kutluer, K.; Salihoglu, Ö.; Aydınlı, Atilla; Aslan, B.; Arikan, B.; Kilinc, M. C.; Ergun, Y.; Serincan, U.; Turan, R.
The authors describe the noise characterization of a mid-wavelength- infrared (MWIR) photodiode based on indium arsenide and gallium antimonide (InAs/GaSb) superlattice (SL), addressing the influence of different passivation layers applied to the surface of the device. The MWIR InAs/GaSb SL design structure is based on p-i-n configuration grown by the molecular beam epitaxy on a (001) n-GaSb substrate. The SiO 2-passivated SL photodiodes demonstrated a Schottky-limited noise up to a bias voltage of -0.1 V where the measured peak responsivity is 1.37 A/W with a cut-off wavelength of 4.9 μm and the specific detectivity as high as 1.23 × 10 12 cm. Hz 1/2 W , demonstrating the high quality of the fabricated MWIR SL photodiodes. The noise measurements exhibited a frequency-dependent plateau (i.e., 1/f noise) for unpassivated and Si 3N 4-passivated samples, whereas 1/f-type noise suppression (i.e., frequency-independent plateau) with a noise current reduction at about 30 Hz of more than one order of magnitude was observed for the SiO 2-passivated ones.
Open Access
Electrically-reconfigurable integrated photonic switches
(IEEE, 2004) Fidaner, O.; Demir, Hilmi Volkan; Sabnis V.A.; Harris Jr. J.S.; Miller, D.A.B.; Zheng J.-F.
We report remotely electrically reconfigurable photonic switches that intimately integrate waveguide electroabsorption modulators with surface-normal photodiodes, avoiding conventional electronics. These switches exhibit full C-band wavelength conversion at 5 Gb/s and are remotely reconfigurable within tens of nanoseconds.
Open Access
Electron initiated impact ionization in AlGaN alloys
(Institute of Physics, 2002) Bulutay, C.
Detailed impact ionization (II) analysis of electrons is presented for AlGaN alloys as a vital resource for solar-blind avalanche photodiode and high power transistor applications. Necessary ingredients for the II characterization are supplied from a recent experiment on the GaN end, and a Keldysh analysis for the AlN end, of the alloy AlGaN. High-field electron dynamics are simulated using an ensemble Monte Carlo framework, accounting for all valleys in the lowest two conduction bands, obtained from accurate empirical pseudopotential band structure computations. The effect of alloy scattering on II is considered and observed to be significant. For any AlxGa1-xN alloy, the electron II coefficients are found to obey the form, A exp(-K/F), for the electric field, F.
Open Access
Electronic and optical properties of 4.2 μm"N" structured superlattice MWIR photodetectors
(Elsevier, 2013) Salihoglu, O.; Hostut M.; Tansel, T.; Kutluer, K.; Kilic A.; Alyoruk, M.; Sevik, C.; Turan, R.; Ergun, Y.; Aydınlı, Atilla
We report on the development of a new structure for type II superlattice photodiodes that we call the "N" design. In this new design, we insert an electron barrier between InAs and GaSb in the growth direction. The barrier pushes the electron and hole wavefunctions towards the layer edges and under bias, increases the overlap integral by about 25% leading to higher detectivity. InAs/AlSb/GaSb superlattices were studied with density functional theory. Both AlAs and InSb interfaces were taken into account by calculating the heavy hole-light hole (HH-LH) splittings. Experiments were carried out on single pixel photodiodes by measuring electrical and optical performance. With cut-off wavelength of 4.2 μm at 120 K, temperature dependent dark current and detectivity measurements show that the dark current is 2.5 × 10 -9 A under zero bias with corresponding R0A resistance of 1.5 × 104 Ω cm2 for the 500 × 500 μm2 single pixel square photodetectors. Photodetector reaches BLIP condition at 125 K with the BLIP detectivity (DBLIP) of 2.6 × 10 10 Jones under 300 K background and -0.3 V bias voltage. © 2012 Elsevier B.V. All rights reserved.
Open Access
Enhanced photoresponse of conformal TiO2/Ag nanorod array-based Schottky photodiodes fabricated via successive glancing angle and atomic layer deposition
(AVS Science and Technology Society, 2015) Haider A.; Cansizoglu, H.; Cansizoglu, M. F.; Karabacak, T.; Okyay, Ali Kemal; Bıyıklı, Necmi
In this study, the authors demonstrate a proof of concept nanostructured photodiode fabrication method via successive glancing angle deposition (GLAD) and atomic layer deposition (ALD). The fabricated metal-semiconductor nanorod (NR) arrays offer enhanced photoresponse compared to conventional planar thin-film counterparts. Silver (Ag) metallic NR arrays were deposited on Ag-film/Si templates by utilizing GLAD. Subsequently, titanium dioxide (TiO2) was deposited conformally on Ag NRs via ALD. Scanning electron microscopy studies confirmed the successful formation of vertically aligned Ag NRs deposited via GLAD and conformal deposition of TiO2 on Ag NRs via ALD. Following the growth of TiO2 on Ag NRs, aluminum metallic top contacts were formed to complete the fabrication of NR-based Schottky photodiodes. Nanostructured devices exhibited a photo response enhancement factor of 1.49 × 102 under a reverse bias of 3 V. © 2014 American Vacuum Society.
Open Access
Experimental evaluation of impact ionization coefficients in Al xGa1-xN based avalanche photodiodes
(AIP Publishing LLC, 2006) Tut, T.; Gökkavas, M.; Bütün, B.; Bütün, S.; Ülker, E.; Özbay, Ekmel
The authors report on the metal-organic chemical vapor deposition growth, fabrication, and characterization of high performance solar-blind avalanche photodetectors and the experimental evaluation of the impact ionization coefficients that are obtained from the photomultiplication data. A Schottky barrier, suitable for back and front illuminations, is used to determine the impact ionization coefficients of electrons and holes in an AlGaN based avalanche photodiode. © 2006 American Institute of Physics.
Open Access
Fabrication of high-speed resonant cavity enhanced schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1997-05) Özbay, Ekmel; Islam, M. S.; Onat, B.; Gökkavas, M.; Aytür, O.; Tuttle, G.; Towe, E.; Henderson, R. H.; Ünlü, M. S.
We report the fabrication and testing of a GaAs-based high-speed resonant cavity enhanced (RCE) Schottky photodiode. The top-illuminated RCE detector is constructed by integrating a Schottky contact, a thin absorption region (In0.8Ga0.92As) and a distributed AlAs-GaAs Bragg mirror. The Schottky contact metal serves as a high-reflectivity top mirror in the RCE detector structure. The devices were fabricated by using a microwave-compatible fabrication process. The resulting spectral photo response had a resonance around 895 nm, in good agreement with our simulations. The full-width-at-half-maximum (FWHM) was 15 nm, and the enhancement factor was in excess of 6. The photodiode had an experimental setup limited temporal response of 18 ps FWHM, corresponding to a 3-dB bandwidth of 20 GHz.
Open Access
Gain and temporal response of AlGaN solar-blind avalanche photodiodes: An ensemble Monte Carlo analysis
(A I P Publishing LLC, 2003) Sevik, C.; Bulutay, C.
A study was performed on temporal and gain response of AlGaN solar-blind avalanche photodiodes (APD). The ensemble Monte Carlo method was used for the purpose. It was found that without any fitting parameters, reasonable agreement was obtained with the published measurements for a GaN APD.
Open Access
Grating coupler integrated photodiodes for plasmon resonance based sensing in fluidic systems
(IEEE, 2011) Türker, Burak; Güner, Hasan; Ayaş, Sencer; Ekiz, Okan O.; Acar, Handan; Güler, Mustafa O.; Dâna, Aykutlu
We demonstrate an integrated sensor combining a grating-coupled plasmon resonance surface with a planar photodiode. Plasmon enhanced transmission is employed as a sensitive refractive index (RI) sensing mechanism and monitored via the integrated photodiode. © 2011 OSA.
Open Access
High bandwidth-efficiency solar-blind AlGaN Schottky photodiodes with low dark current
(Pergamon Press, 2005-01) Tut, T.; Bıyıklı, Necmi; Kimukin, I.; Kartaloglu, T.; Aytur, O.; Unlu, M. S.; Özbay, Ekmel
Al0.38Ga0.62N/GaN heterojunction solar-blind Schottky photodetectors with low dark current, high responsivity, and fast pulse response were demonstrated. A five-step microwave compatible fabrication process was utilized to fabricate the devices. The solarblind detectors displayed extremely low dark current values: 30 μm diameter devices exhibited leakage current below 3fA under reverse bias up to 12V. True solar-blind operation was ensured with a sharp cut-off around 266nm. Peak responsivity of 147mA/W was measured at 256nm under 20V reverse bias. A visible rejection more than 4 orders of magnitude was achieved. The thermally-limited detectivity of the devices was calculated as 1.8 × 1013cm Hz1/2W-1. Temporal pulse response measurements of the solar-blind detectors resulted in fast pulses with high 3-dB bandwidths. The best devices had 53 ps pulse-width and 4.1 GHz bandwidth. A bandwidth-efficiency product of 2.9GHz was achieved with the AlGaN Schottky photodiodes. © 2004 Elsevier Ltd. All rights reserved.
Open Access
High quantum efficiency Type-II superlattice N-structure photodetectors with thin intrinsic layers
(SPIE, 2013) Ergun, Y.; Hostut, M.; Tansel, T.; Muti, bdullah; Kilic, A.; Turan, R.; Aydınlı, Atilla
We report on the development of InAs/AlSb/GaSb based N-structure superlattice pin photodiode. In this new design, AlSb layer in between InAs and GaSb layers acts as an electron barrier that pushes electron and hole wave functions towards the GaSb/InAs interface to perform strong overlap under reverse bias. Experimental results show that, with only 20 periods of intrinsic layers, dark current density and dynamic resistance at -50 mV bias are measured as 6×10-3 A/cm2 and 148 ωcm2 at 77K, respectively. Under zero bias, high spectral response of 1.2A/W is obtained at 5 μm with 50% cut-off wavelengths (λc) of 6 μm. With this new design, devices with only 146 nm thick i-regions exhibit a quantum efficiency of 42% at 3 μm with front-side illimunation and no anti-reflection coatings. © 2013 SPIE.
Open Access
High-performance 1.55 μm resonant cavity enhanced photodetector
(IEEE, 2002) Kimukin, İbrahim; Bıyıklı, Necmi; Özbay, Ekmel
A high speed and high efficiency resonant cavity enhanced InGaAs based photodetector was demonstrated. A peak quantum efficiency of 66% was measured along with 31 GHz bandwidth with the device. The photoresponse was found to be linear upto 6 mW optical power, where the device 5 mA photocurrent.
Open Access
High-performance ALGaN-based visible-blind resonant cavity enhanced Schottky photodiodes
(Materials Research Society, 2003-04) Kimukin, İbrahim; Bıyıklı, Necmi; Kartaloğlu, Tolga; Aytür, Orhan; Özbay, Ekmel
We have designed, fabricated and tested resonant cavity enhanced visible-blind AlGaN-based Schottky photodiodes. The bottom mirror of the resonant cavity was formed with a 20 pair AlN/AlGaN Bragg mirror. The devices were fabricated using a microwave compatible fabrication process. Au and indium-tin-oxide (ITO) thin films were used for Schottky contact formation. ITO and Au-Schottky devices exhibited resonant peaks with 0.153 A/W and 0.046 A/W responsivity values at 337 nm and 350 nm respectively. Temporal high-speed measurements at 357 nm resulted in fast pulse responses with pulse widths as short as 77 ps. The fastest UV detector had a 3-dB bandwidth of 780 MHz.
Open Access
High-performance ITO-AlAs/GaAs based resonant cavity enhanced Schottky photodiodes
(IEEE, 1999) Özbay, Ekmel; Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan
The fabrication of ITO (indium tin oxide)-AlAs-based resonant cavity enhanced Schottky photodiodes was examined. The device structure was designed to achieve a low-loss cavity around a 840 nm optical communication window. The layers were grown by molecular beam epitaxy on a GaAs substrate. Photoresponse measurements were carried out in 750-900 nm wavelength range using a tungsten-halogen projection lamp as the light source and single pass monochromator. Although the discrepancy between the experiment and theory was quite large, a nearly parallel enhancement of the initial efficiency values was observed as a function of the top distributed Bragg reflector pair.
Open Access
High-performance solar-blind AlGaN photodetectors
(SPIE, 2005) Özbay, Ekmel; Tut, Turgut; Bıyıklı, N.
Design, fabrication, and characterization of high-performance Al xGa1-xN-based photodetectors for solar-blind applications are reported. AlxGa1-xN heterostructures were designed for Schottky, p-i-n, and metal-semiconductor-metal (MSM) photodiodes. The solar-blind photodiode samples were fabricated using a microwave compatible fabrication process. The resulting devices exhibited extremely low dark currents. Below 3 fA leakage currents at 6 V and 12 V reverse bias were measured on p-i-n and Schottky photodiode samples respectively. The excellent current-voltage (I-V) characteristics led to a detectivity performance of 4.9×1014 cmHz1/2W-1. The MSM devices exhibited photoconductive gain, while Schottky and p-i-n samples displayed 0.15 A/W and 0.11 A/W peak responsivity values at 267 nm and 261 nm respectively. All samples displayed true solar-blind response with cut-off wavelengths smaller than 280 nm. A visible rejection of 4×104 was achieved with Schottky detector samples. High speed measurements at 267 nm resulted in fast pulse responses with >GHz bandwidths. The fastest devices were MSM photodiodes with a maximum 3-dB bandwidth of 5.4 GHz.
Open Access
High-performance solar-blind AlGaN Schottky photodiodes
(Materials Research Society, 2003) Bıyıklı, Necmi; Kartaloglu, T.; Aytur, O.; Kimukin, I.; Özbay, Ekmel
High-performance solar-blind AlGaN-based Schottky photodiodes have been demonstrated. The detectors were fabricated on MOCVD-grown AlGaN/GaN heterostructures using a microwave-compatible fabrication process. Current-voltage, spectral responsivity, noise, and high-speed characteristics of the detectors were measured and analyzed. Dark currents lower than 1 pA at bias voltages as high as 30 V were obtained. True solar-blind detection was achieved with a cut-off wavelength lower than 266 nm. A peak device responsivity of 78 mA/W at 250 nm was measured under 15 V reverse bias. A visible rejection of more than 4 orders of magnitude was observed. The solar-blind photodiodes exhibited noise densities below the measurement setup noise floor of 3×10 -29 A 2/Hz around 10 KHz. High-speed measurements at the solar-blind wavelength of 267 nm resulted in 3-dB bandwidths as high as 870 MHz.