Browsing by Subject "Optical waveguides"

Now showing 1 - 20 of 35

Open Access
Band-dropping via coupled photonic crystal waveguides
(Optical Society of American (OSA), 2002) Bayındır, Mehmet; Özbay, Ekmel
We observe the dropping of electromagnetic waves having a specific frequency or a certain frequency band in two-dimensional dielectric photonic crystals. The single frequency is dropped via cavity-waveguide coupling. Tunability of the demultiplexing mode can be achieved by modifying the cavity properties. The band-dropping phenomenon is achieved by introducing interaction between an input planar, or coupled-cavity, waveguide and the output coupled-cavity waveguides (CCWs). The dropping band can be tuned by changing the coupling strength between the localized cavity modes of the output CCWs. We also calculate the transmission spectra and the field patterns by using the finite-difference-time-domain (FDTD) method. Calculated results agree well with the microwave measurements. © 2002 Optical Society of America.
Open Access
Buried waveguides written deep inside silicon
(OSA, 2017) Turnalı, Ahmet; Tokel, Onur; Kesim, Denizhan Koray; Makey, Ghaith; Elahi, Parviz; İlday, Fatih Ömer
Summary form only given. Silicon waveguides are widely used as optical interconnects and they are particularly important for Si-photonics. Si-based devices, along with other optical elements, are entirely fabricated on the top surface of Si wafers. However, further integration of photonic and electronic devices in the same chip requires a new approach. One alternative is to utilize the bulk of the wafer for fabricating photonic elements. Recently, we reported a direct-laser-writing method that exploits nonlinear interactions and can generate subsurface modifications inside silicon without damaging the surface. Using this method, we fabricated several functional optical elements including gratings, lenses, and holograms. In this work, we demonstrate optical waveguides entirely embedded in Si.
Open Access
Compact wavelength de-multiplexer design using slow light regime of photonic crystal waveguides
(Optical Society of American (OSA), 2011) Akosman, A.E.; Mutlu, M.; Kurt H.; Özbay, Ekmel
We demonstrate the operation of a compact wavelength demultiplexer using cascaded single-mode photonic crystal waveguides utilizing the slow light regime. By altering the dielectric filling factors of each waveguide segment, we numerically and experimentally show that different frequencies are separated at different locations along the waveguide. In other words, the beams of different wavelengths are spatially dropped along the transverse to the propagation direction. We numerically verified the spatial shifts of certain wavelengths by using the two-dimensional finite-difference time-domain method. The presented design can be extended to de-multiplex more wavelengths by concatenating additional photonic crystal waveguides with different filling factors. © 2011 Optical Society of America.
Open Access
Dual-frequency division de-multiplexer based on cascaded photonic crystal waveguides
(Elsevier, 2012-02-28) Akosman, Ahmet E.; Mutlu, Mehmet; Kurt, H.; Özbay, Ekmel
A dual-frequency division de-multiplexing mechanism is demonstrated using cascaded photonic crystal waveguides with unequal waveguide widths. The de-multiplexing mechanism is based on the frequency shift of the waveguide bands for the unequal widths of the photonic crystal waveguides. The modulation in the waveguide bands is used for providing frequency selectivity to the system. The slow light regime of the waveguide bands is utilized for extracting the desired frequency bands from a wider photonic crystal waveguide that has a relatively larger group velocity than the main waveguide for the de-multiplexed frequencies. In other words, the wider spatial distribution of the electric fields in the transverse direction of the waveguide for slow light modes is utilized in order to achieve the dropping of the modes to the output channels. The spectral and spatial de-multiplexing features are numerically verified. It can be stated that the presented mechanism can be used to de-multiplex more than two frequency intervals by cascading new photonic crystal waveguides with properly selected widths.
Open Access
An elastomeric grating coupler
(IOP Institute of Physics, 2006) Kocabas, A.; Ay, F.; Dâna, A.; Aydınlı, Atilla
We report on a novel nondestructive and reversible method for coupling free space light to planar optical waveguides. In this method, an elastomeric grating is used to produce an effective refractive index modulation on the surface of the optical waveguide. The external elastomeric grating binds to the surface of the waveguide with van der Waals forces and makes conformal contact without any applied pressure. As a demonstration of the feasibility of the approach, we use it to measure the refractive index of a silicon oxynitride film. This technique is nondestructive, reversible, low cost and can easily be applied to the characterization of optical materials for integrated optics. © 2006 IOP Publishing Ltd.
Open Access
Electro-optic modulation of InAs quantum dot waveguides
(Technische Universiteit Eindhoven, 2008) Akça, İmran. B.; Dâna, Aykutlu; Aydınlı, Atilla; Rossetti, M.; Li, L.; Fiore, A.; Dağlı, N.
The linear electro-optic properties in waveguides containing self-organized In As quantum dots were studied experimentally. Fabry-Perot measurements at 1515 nm on InAs/GaAs quantum dot structures yield a significantly enhanced linear electro-optic efficiency compared to bulk GaAs.
Open Access
Experimental demonstration of highly confined photonic crystal based waveguides
(IEEE, 2001) Bayındır, Mehmet; Özbay, Ekmel; Temelkuran, B.; Sigalas, M. M.; Soukoulis, C. M.; Biswas, R.; Ho, K. M.
The bending and guiding of the electromagnetic (EM) waves in highly confined waveguides was demonstrated. The electromagnetic waves were constructed by removing a single rod from a perfect three layer-by-layer photonic crystals. A layer-by-layer dielectric photonic crystal based on square shaped alumina rods was used with center-to-center separation of 1.12 cm. The results suggested the use of the layer-by-layer photonic crystal structure in the design of optoelectronic integrated circuits.
Open Access
Filtering characteristics of hybrid integrated polymer and compound semiconductor waveguides
(IEEE, 2002) Ozturk, C.; Huntington, A.; Aydınlı, Atilla; Byun, Y.T.; Dagli, N.
This paper reports a study on a compact filter fabricated using hybrid integration of compound semiconductors and polymers. A GaAs epilayer is glued onto a polymer channel waveguide forming a highly asymmetrical directional coupler. This approach results in a narrow band filter due to very different dispersion characteristics of the compound semiconductor and the polymer materials. Furthermore, fiber coupling loss has been significantly reduced, since the input and output coupling is done through the polymer waveguide. Filtering characteristics can be engineered by changing the thickness and the length of the semiconductor epilayer. This can be done precisely using etch stop layers and noncritical lithography. The spectral response of such a filter can also be tuned electronically either using the electro-optic properties of the compound semiconductor or the thermo-optic properties of the polymer.
Open Access
Förster resonance energy transfer enhanced color-conversion using colloidal semiconductor quantum dots for solid state lighting
(American Institute of Physics, 2009-10-15) Nizamoglu, S.; Demir, Hilmi Volkan
In this paper, we present Förster resonance energy transfer (FRET)-enhanced color-conversion using colloidal semiconductor quantum dot nanocrystals (NCs) to make reddish-orange light-emitting diodes for use in ultraefficient solid state lighting. To achieve FRET enhancement at 614 nm, we use an energy gradient hybrid structure made of cyan- and orange-emitting CdSe/ZnS NCs (λPL =492 and 588 nm in solution, respectively). This enables recycling of trapped excitons using FRET and achieves a relative quantum efficiency enhancement of 15.1% in reddish-orange full color-conversion for the integrated hybrid cyan-orange NC layer with respect to the case of full color-conversion using only orange NCs without FRET.
Open Access
Guiding and bending of photons via hopping in three-dimensional photonic crystals
(IEEE, Piscataway, NJ, United States, 2000) Bayındır, Mehmet; Temelkuran, B.; Özbay, Ekmel
For the past decade, photonic crystals, also known as photonic bandgap (PBG) materials, have inspired great interest because of their novel scientific and engineering applications such as the inhibition of spontaneous emission, thresholdless lasers, optical circuits, antennas, waveguides, detectors, fibers, and so on. Creating defect states within the PBG are very important for such applications. Recently, we have reported the eigenmode splitting due to coupling of the localized defects and guiding of the electromagnetic (EM) waves through a periodic arrangement of such defects in three-dimensional (3D) photonic crystals. Although the modes of each cavity were tightly confined at the defect sites, overlapping between the nearest-neighbor modes is enough to provide the propagation of photons via hopping. We report on the observation of guiding and bending of EM wave through evanescent defect modes for three different PBG waveguide structures.
Open Access
Hartree-Fock approximation of bipolaron state in quantum dots and wires
(Springer, 2010) Senger, R. T.; Kozal, B.; Chatterjee, A.; Erçelebi, A.
The bipolaronic ground state of two electrons in a spherical quantum dot or a quantum wire with parabolic boundaries is studied in the strong electron-phonon coupling regime. We introduce a variational wave function that can conveniently conform to represent alternative ground state configurations of the two electrons, namely, the bipolaronic bound state, the state of two individual polarons, and two nearby interacting polarons confined by the external potential. In the bipolaron state the electrons are found to be separated by a finite distance about a polaron size. We present the formation and stability criteria of bipolaronic phase in confined media. It is shown that the quantum dot confinement extends the domain of stability of the bipolaronic bound state of two electrons as compared to the bulk geometry, whereas the quantum wire geometry aggravates the formation of stable bipolarons.
Open Access
High-performance 1.55 μm resonant cavity enhanced photodetector
(IEEE, 2002) Kimukin, İbrahim; Bıyıklı, Necmi; Özbay, Ekmel
A high speed and high efficiency resonant cavity enhanced InGaAs based photodetector was demonstrated. A peak quantum efficiency of 66% was measured along with 31 GHz bandwidth with the device. The photoresponse was found to be linear upto 6 mW optical power, where the device 5 mA photocurrent.
Open Access
High-Q silicon-on-insulator optical rib waveguide racetrack resonators
(Optical Society of American (OSA), 2005) Kiyat I.; Aydınlı, Atilla; Dagli, N.
In this work, detailed design and realization of high quality factor (Q) racetrack resonators based on silicon-on-insulator rib waveguides are presented. Aiming to achieve critical coupling, suitable waveguide geometry is determined after extensive numerical studies of bending loss. The final design is obtained after coupling factor calculations and estimation of propagation loss. Resonators with quality factors (Q) as high as 119000 has been achieved, the highest Q value for resonators based on silicon-on-insulator rib waveguides to date with extinction ratios as large as 12 dB. © 2005 Optical Society of America.
Open Access
High-speed widely-tunable >90% quantum-efficiency resonant cavity enhanced p-i-n photodiodes
(IEEE, 1998) Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan; Gökkavas, M.; Ulu, G.; Mirin, R.; Christensen, D. H.; Ünlü, M. S.; Özbay, Ekmel
Widely-tunable high-speed resonant cavity enhanced p-i-n photodiodes were designed, fabricated and tested for operation around 820 nm. The structure was grown by solid-source MBE on GaAs substrates and features high-reflectivity Bragg mirrors made of quarter-wave Al0.20Ga0.80As/AlAs stacks. Photoresponse and photospectral measurements were carried out. The tuning of the resonance wavelength within the Bragg mirror's upper and lower edges was observed. Quantum efficiency greater than 90% was demonstrated.
Open Access
Integrated micro ring resonator displacement sensor for scanning probe microscopies
(Institute of Physics Publishing, 2004) Kiyat, I.; Kocabas, C.; Aydınlı, Atilla
We describe a novel displacement sensor for scanning probe microscopies using an integrated optical micro ring resonator. This device operates by means of monitoring the changes in the transmission spectrum of a high finesse micro ring resonator. Finite element method simulations were carried out to obtain the optimum sensor design and finite difference time domain simulation was used to obtain the transfer characteristics of micro ring resonators. Operation principles and sensitivity calculations are discussed in detail. To achieve high sensitivity, we have studied different types of ring resonator. The highest sensitivity is obtained in a race-track resonator. This new design should provide sensitivities as high as ∼10 -4 Å -1.
Open Access
Kilometer-long ordered nanophotonic devices by preform-to-fiber fabrication
(Institute of Electrical and Electronics Engineers, 2006) Bayındır, Mehmet; Abouraddy, A.F.; Shapira O.; Viens J.; Saygin-Hinczewski, D.; Sorin, F.; Arnold, J.; Joannopoulos, J. D.; Fink, Y.
A preform-to-flber approach to the fabrication of functional fiber-based devices by thermal drawing in the viscous state is presented. A macroscopic preform rod containing metallic, semiconducting, and insulating constituents in a variety of geometries and close contact produces kilometer-long novel nanostructured fibers and fiber devices. We first review the material selection criteria and then describe metal-semiconductor-metal photosensitive and thermally sensitive fibers. These flexible, lightweight, and low-cost functional fibers may pave the way for new types of fiber sensors, such as thermal sensing fabrics, artificial skin, and large-area optoelectronic screens. Next, the preform-to-fiber approach is used to fabricate spectrally tunable photodetectors that integrate a photosensitive core and a nanostructured photonic crystal structure containing a resonant cavity. An integrated, self-monitoring optical-transmission waveguide is then described that incorporates optical transport and thermal monitoring. This fiber allows one to predict power-transmission failure, which is of paramount importance if high-power optical transmission fines are to be operated safely and reliably in medical, industrial and defense applications. A hybrid electron-photon fiber consisting of a hollow core (for optical transport by means of a photonic bandgap) and metallic wires (for electron transport) is described that may be used for transporting atoms and molecules by radiation pressure. Finally, a solid microstructured fiber fabricated with a highly nonlinear chalcogenide glass enables the generation of supercontinuum light at near-infrared wavelengths.
Open Access
Mesoscopic Fano effect in an Aharonov-Bohm interferometer Coulomb-coupled to a nearby quantum dot
(Wiley, 2007) Tolea, M.; Moldoveanu, V.; Tanatar, Bilal
Motivated by the pionieering experiments of Buks et al. [Nature 391, 871 (1998)] we investigate the visibility of the Fano effect in a single-dot Aharonov-Bohm interferometer which is Coulomb-coupled to a nearby quantum dot. The latter acts as a 'Which Path Detector' and is coupled to two leads on which a finite bias is applied. Using the non-equilibrium Keldysh-Green function formalism we compute the currents through the detector and the interferometer. We take into account the first two contributions to the interaction selfenergy and emphasize the correction to the Landauer formula which appears beyond the single-particle approximation. Particular attention is given to the coherence properties of the interferometer in the presence of the electron-electron interaction between the embedded dot and the detector. We show that when the detector is subjected to a finite bias the amplitude of Aharonov-Bohm oscillations of the current through the interferometer decreases. The Fano line is in turn rather stable under interaction. Our results generalize an earlier work of Silva and Levit [Phys. Rev. B 63, 201309 (2001)] and complement the existing description of the controlled dephasing.
Open Access
Monolithic and hybrid silicon-on-insulator integrated optical devices
(2005) Kiyat, İsa
Silicon, the basic material of electronics industry is rediscovered nowadays for its potential use in photonics and integrated optics. The research activity in silicon integrated optics have been speeding up during the last decade and even attracting interest of leading industrial companies. As a contribution to this world wide effort, we have designed, fabricated and characterized a class of monolithic and hybrid silicon integrated optical devices. These devices were realized on high-quality silicon-on-insulator (SOI) wafers. Beam propagation method (BPM) based simulations and analytical calculations were employed for the design. We have demonstrated for the first time an SOI device that splits light into its TE and TM components. An SOI rib waveguide becomes birefringent as its size reduced. This idea is used to design and fabricate a directional coupler polarization splitter based on geometrical birefringence. The device uses 1 µm sized SOI waveguides. This compact device (only 110 µm in length) shows extinction ratios larger than 20 dB. SOI waveguides with the same geometry was used to realize a batch of single and double bus racetrack resonators having radii in the range of 20 to 500 µm. Design of these racetrack resonators are presented in detail. The bending loss and coupling factor calculations were performed using BPM. During the design and analysis of waveguide resonators, we proposed a novel displacement sensor that can be used for scanning probe microscopies. The sensor operates by means of monitoring the changes in transmission spectrum of a high finesse micro-ring resonator due to stress induced by displacement. Operation principles and sensitivity calculations are discussed in detail. SOI resonators with quality factors (Q) as high as 119000 have been achieved. This is the highest Q value for resonators based on SOI rib waveguides to date. Finesse values as large as 43 and modulation depths of 15 dB were observed. Free spectral ranges increased from 0.2 nm to 3.0 nm when radius was decreased from 500 to 20 µm. The thermo-optical tunability of these resonators were also studied. A high-Q racetrack resonator is used to develop a wavelength selective optical switch. The resonator was thermo-optically scanned over its full free spectral range applying only 57 mW of electrical power. A low power of 17 mW was enough to tune from resonance to off-resonance state. The device functioned as a wavelength selective optical switch with a 3 dB cutoff frequency of 210 kHz. We have also demonstrated wavelength add/drop filters using the same racetrack resonators with double bus. Asymmetric lateral coupling was used in order to get better filter characteristics. Filters with crosstalks as low as -10.0 dB and Q-factors of as high as 51000 were achieved. Finally, we introduce the use of a layer transfer method for SOI wafers. Such a layer transfer results in the possibility of using the back side of the silicon layer in SOI structure for further processing. With this method, previously fabricated SOI waveguides were transferred to form hybrid silicon-polymer waveguides. Benzocyclobutene (BCB) polymer was used as the bonding agent. The method is also applied to SOI M-Z interferometers to explore the possibilities of the technology. We additionally studied asymmetric vertical couplers (AVC) based on polymer and silicon waveguides and fabricated them using a hybrid technology.
Open Access
Novel integrated optical displacement sensor for scanning force microscopies
(IEEE, 2003) Aydınlı, Atilla; Kıyat, İsa; Kocabaş, Coşkun
A novel displacement sensor for scanning force microscoples using an integrated optical micro-ring resonator is described. Device operates by monitoring the changes in transmission spectrum of micro-ring resonator. This design provides sensitivities about ∼10-4 Å-1.
Open Access
An optical microcantilever with integrated grating coupler
(IEEE, 2009-06) Olcum, Selim; Karademir, Ertuğrul; Taş. Vahdettin; Akça, İmran; Kocabaş, Aşkın; Atalar, Abdullah; Aydınlı, Aydınlı
In this paper, we have fabricated an optical cantilever with an integrated grating coupler. We have used an inexpensive and repeatable method for integrating the grating to the silicon cantilever with a microfabrication compatible process. The sensitivity of the method can be further increased by integrating the detection circuitry onto the cantilever substrate. We believe that this is a promising method for sensing applications which provide a simple yet sensitive measurement technique using microcantilevers.