Browsing by Author "Ünlü, M. S."

Now showing 1 - 12 of 12

Open Access
100-GHz resonant cavity enhanced Schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1998) Onat, B. M.; Gökkavas, M.; Özbay, Ekmel; Ata, E. P.; Towe, E.; Ünlü, M. S.
Resonant cavity enhanced (RCE) photodiodes are promising candidates for applications in optical communications and interconnects where ultrafast high-efficiency detection is desirable. We have designed and fabricated RCE Schottky photodiodes in the (Al, In) GaAs material system for 900-nm wavelength. The observed temporal response with 10-ps pulsewidth was limited by the measurement setup and a conservative estimation of the bandwidth corresponds to more than 100 GHz. A direct comparison of RCE versus conventional detector performance was performed by high speed measurements under optical excitation at resonant wavelength (895 nm) and at 840 nm where the device functions as a single-pass conventional photodiode. A more than two-fold bandwidth enhancement with the RCE detection scheme was demonstrated.
Open Access
45 GHz bandwidth-efficiency resonant cavity enhanced ITO-Schottky photodiodes
(OSA, 2001) Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan; Özbay, Ekmel; Gökkavas, M.; Ünlü, M. S.
We demonstrated high-performance resonant cavity enhanced ITO-Schottky photodiodes. We achieved a peak efficiency of 75% around 820 nm with a 3-dB bandwidth of 60 GHz resulting in a bandwidth-efficiency product of 45 GHz.
Open Access
45-GHz bandwidth-efficiency resonant-cavity-enhanced ITO-Schottky photodiodes
(IEEE, 2001) Bıyıklı, Necmi; Kimukin, I.; Aytür, O.; Gökkavas, M.; Ünlü, M. S.; Özbay, Ekmel
High-speed Schottky photodiodes suffer from low efficiency mainly due to the thin absorption layers and the semitransparent Schottky-contact metals. We have designed, fabricated and characterized high-speed and high-efficiency AlGaAs-GaAs-based Schottky photodiodes using transparent indium-tin-oxide Schottky contact material and resonant cavity enhanced detector structure. The measured devices displayed resonance peaks around 820 nm with 75% maximum peak efficiency and an experimental setup limited temporal response of 11 ps pulsewidth. The resulting 45-GHz bandwidth-efficiency product obtained from these devices corresponds to the best performance reported to date for vertically illuminated Schottky photodiodes.
Open Access
Design and optimization of high-speed resonant cavity enhanced Schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1999-02) Gökkavas, M.; Onat, B. M.; Özbay, Ekmel; Ata, E. P.; Xu, J.; Towe, E.; Ünlü, M. S.
Resonant cavity enhanced (RCE) photodiodes (PD's) are promising candidates for applications in optical communications and interconnects where high-speed high-efficiency photodetection is desirable. In RCE structures, the electrical properties of the photodetector remain mostly unchanged; however, the presence of the microcavity causes wavelength selectivity accompanied by a drastic increase of the optical field at the resonant wavelengths. The enhanced optical field allows to maintain a high efficiency for faster transit-time limited PD's with thinner absorption regions. The combination of an RCE detection scheme with Schottky PD's allows for the fabrication of high-performance photodetectors with relatively simple material structures and fabrication processes. In top-illuminated RCE Schottky PD's, a semitransparent Schottky contact can also serve as the top reflector of the resonant cavity. We present theoretical and experimental results on spectral and high-speed properties of GaAs-AlAs-InGaAs RCE Schottky PD's designed for 900-nm wavelength.
Open Access
Fabrication of high-speed resonant cavity enhanced schottky photodiodes
(Institute of Electrical and Electronics Engineers, 1997-05) Özbay, Ekmel; Islam, M. S.; Onat, B.; Gökkavas, M.; Aytür, O.; Tuttle, G.; Towe, E.; Henderson, R. H.; Ünlü, M. S.
We report the fabrication and testing of a GaAs-based high-speed resonant cavity enhanced (RCE) Schottky photodiode. The top-illuminated RCE detector is constructed by integrating a Schottky contact, a thin absorption region (In0.8Ga0.92As) and a distributed AlAs-GaAs Bragg mirror. The Schottky contact metal serves as a high-reflectivity top mirror in the RCE detector structure. The devices were fabricated by using a microwave-compatible fabrication process. The resulting spectral photo response had a resonance around 895 nm, in good agreement with our simulations. The full-width-at-half-maximum (FWHM) was 15 nm, and the enhancement factor was in excess of 6. The photodiode had an experimental setup limited temporal response of 18 ps FWHM, corresponding to a 3-dB bandwidth of 20 GHz.
Open Access
High bandwidth-efficiency resonant cavity enhanced Schottky photodiodes for 800-850 nm wavelength operation
(A I P Publishing LLC, 1998-05-25) Ünlü, M. S.; Gökkavas, M.; Onat, B. M.; Ata, E.; Özbay, Ekmel; Mirin, R. P.; Knopp, K. J.; Bertness, K. A.; Christensen, D. H.
High-speed resonant cavity enhanced Schottky photodiodes operating in 800-850 nm wavelength region are demonstrated. The devices are fabricated in the AlGaAs/GaAs material system. The Schottky contact is a semitransparent Au film which also serves as the top reflector of the Fabry-Perot cavity. The detectors exhibit a peak quantum efficiency of η=0.5 at λ=827nm wavelength and a 3 dB bandwidth of more than 50 GHz resulting in a bandwidth-efficiency product of more than 25 GHz.
Open Access
High-speed >90% quantum-efficiency p-i-n photodiodes with a resonance wavelength adjustable in the 795-835 nm range
(A I P Publishing LLC, 1999-02-22) Özbay, Ekmel; Kimukin, İ.; Bıyıklı, Necmi; Aytür, O.; Gökkavas, M.; Ulu, G.; Ünlü, M. S.; Mirin, R. P.; Bertness, K. A.; Christensen, D. H.
We report GaAs/AlGaAs-based high-speed, high-efficiency, resonant cavity enhanced p-i-n photodiodes. The devices were fabricated by using a microwave-compatible fabrication process. By using a postprocess recess etch, we tuned the resonance wavelength from 835 to 795 nm while keeping the peak efficiencies above 90%. The maximum quantum efficiency was 92% at a resonance wavelength of 823 nm. The photodiode had an experimental setup-limited temporal response of 12 ps. When the system response is deconvolved, the 3 dB bandwidth corresponds to 50 GHz, which is in good agreement with our theoretical calculations.
Open Access
High-speed high-efficiency large-area resonant cavity enhanced p-i-n photodiodes for multimode fiber communications
(IEEE, 2001) Gökkavas, M.; Dosunmu, O.; Ünlü, M. S.; Ulu, G.; Mirin, R. P.; Christensen, D. H.; Özbay, Ekmel
In this letter, we report AlGaAs–GaAs p-i-n photodiodes with a 3-dB bandwidth in excess of 10 GHz for devices as large as 60- m diameter. Resonant cavity enhanced photodetection is employed to improve quantum efficiency, resulting in more than 90% peak quantum efficiency at 850 nm.
Open Access
High-speed high-efficiency resonant cavity enhanced photodiodes
(Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, United States, 1999) Özbay, Ekmel; Kimukin, I.; Bıyıklı, N.; Aytür, O.; Gökkavas, M.; Ulu, G.; Ünlü, M. S.; Mirin, R. P.; Bertness, K. A.; Christensen, D. H.; Towe, E.; Tuttle, G.
In this paper, we review our research efforts on RCE high-speed high-efficiency p-i-n and Schottky photodiodes. Using a microwave compatible planar fabrication process, we have designed and fabricated GaAs based RCE photodiodes. For RCE Schottky photodiodes, we have achieved a peak quantum efficiency of 50% along with a 3-dB bandwidth of 100 GHz. The tunability of the detectors via a recess etch is also demonstrated. For p-i-n type photodiodes, we have fabricated and tested widely tunable devices with near 100% quantum efficiencies, along with a 3-dB bandwidth of 50 GHz. Both of these results correspond to the fastest RCE photodetectors published in scientific literature.
Open Access
High-speed resonant-cavity-enhanced Schottky photodiodes
(IEEE, 1998) Ata, Erhan P.; Bıyıklı, Necmi; Demirel, Ekrem; Özbay, Ekmel; Gökkavas, M.; Onat, B.; Ünlü, M. S.; Tuttle, G.
The top-illuminated Schottky photodiodes were fabricated by a microwave-compatible monolithic microfabrication process. Fabrication started with formation of ohmic contacts to n+ layers. Mesa isolation was followed by a Ti-Au interconnect metallization. Following this, a semitransparent Au Schottky metal and a silicon nitride layer was deposited. Finally, a thick Ti-Au layer was deposited to form an air bridge connection between the interconnect and the Schottky metal. The optical properties of the photodiodes were simulated using a transfer matrix method.
Open Access
High-speed widely-tunable >90% quantum-efficiency resonant cavity enhanced p-i-n photodiodes
(IEEE, 1998) Bıyıklı, Necmi; Kimukin, İbrahim; Aytür, Orhan; Gökkavas, M.; Ulu, G.; Mirin, R.; Christensen, D. H.; Ünlü, M. S.; Özbay, Ekmel
Widely-tunable high-speed resonant cavity enhanced p-i-n photodiodes were designed, fabricated and tested for operation around 820 nm. The structure was grown by solid-source MBE on GaAs substrates and features high-reflectivity Bragg mirrors made of quarter-wave Al0.20Ga0.80As/AlAs stacks. Photoresponse and photospectral measurements were carried out. The tuning of the resonance wavelength within the Bragg mirror's upper and lower edges was observed. Quantum efficiency greater than 90% was demonstrated.
Open Access
Improved selectivity from a wavelength addressable device for wireless stimulation of neural tissue
(Frontiers Research Foundation, 2014) Seymour, E. Ç.; Freedman, D. S.; Gökkavas, M.; Özbay, Ekmel; Sahin, M.; Ünlü, M. S.
Electrical neural stimulation with micro electrodes is a promising technique for restoring lost functions in the central nervous system as a result of injury or disease. One of the problems related to current neural stimulators is the tissue response due to the connecting wires and the presence of a rigid electrode inside soft neural tissue. We have developed a novel, optically activated, microscale photovoltaic neurostimulator based on a custom layered compound semiconductor heterostructure that is both wireless and has a comparatively small volume (<0.01 mm3). Optical activation provides a wireless means of energy transfer to the neurostimulator, eliminating wires and the associated complications. This neurostimulator was shown to evoke action potentials and a functional motor response in the rat spinal cord. In this work, we extend our design to include wavelength selectivity and thus allowing independent activation of devices. As a proof of concept, we fabricated two different microscale devices with different spectral responsivities in the near-infrared region. We assessed the improved addressability of individual devices via wavelength selectivity as compared to spatial selectivity alone through on-bench optical measurements of the devices in combination with an in vivo light intensity profile in the rat cortex obtained in a previous study. We show that wavelength selectivity improves the individual addressability of the floating stimulators, thus increasing the number of devices that can be implanted in close proximity to each other. © 2014 Seymour, Freedman, Gökkavas, Özbay, Sahinand Ünlü.