Browsing by Subject "Resonance"

Now showing 1 - 20 of 59

Open Access
45-GHz bandwidth-efficiency resonant-cavity-enhanced ITO-Schottky photodiodes
(IEEE, 2001) Bıyıklı, Necmi; Kimukin, I.; Aytür, O.; Gökkavas, M.; Ünlü, M. S.; Özbay, Ekmel
High-speed Schottky photodiodes suffer from low efficiency mainly due to the thin absorption layers and the semitransparent Schottky-contact metals. We have designed, fabricated and characterized high-speed and high-efficiency AlGaAs-GaAs-based Schottky photodiodes using transparent indium-tin-oxide Schottky contact material and resonant cavity enhanced detector structure. The measured devices displayed resonance peaks around 820 nm with 75% maximum peak efficiency and an experimental setup limited temporal response of 11 ps pulsewidth. The resulting 45-GHz bandwidth-efficiency product obtained from these devices corresponds to the best performance reported to date for vertically illuminated Schottky photodiodes.
Open Access
All-aluminum hierarchical plasmonic surfaces in the infrared
(The Optical Society, 2016) Ayas S.; Bakan, G.; Dana, A.
All-Aluminum metal-insulator-metal resonator structures withmultiple metal-insulator stacks showing resonances in the mid-infrared(MIR) are fabricated. Ultrathin native Al2O3 is used as the insulator layersenabling simple fabrication of the resonator structures. The structures withtwo oxide layers exhibit two distinct resonances in the MIR. Simulation ofthese structures shows confinement of magnetic field to the thicker bottomoxide at the shorter wavelength resonance and to the thinner top oxide at theother resonance. Simulations of higher order hierarchical structures with 3 and 4 oxide layers show multispectral response with precise control of theoxide thicknesses. The studied structures show great potential for IRapplications that require durability and multispectral characteristics.
Open Access
Analysis of double-negative materials with surface integral equations and the multilevel fast multipole algorithm
(IEEE, 2011) Ergül O.; Gürel, Levent
We present a fast and accurate analysis of double-negative materials (DNMs) with surface integral equations and the multilevel fast multipole algorithm (MLFMA). DNMs are commonly used as simplified models of metamaterials at resonance frequencies and are suitable to be formulated with surface integral equations. However, realistic metamaterials and their models are usually very large with respect to wavelength and their accurate solutions require fast algorithms, such as MLFMA. We consider iterative solutions of DNMs with MLFMA and we investigate the accuracy and efficiency of solutions when DNMs are formulated with two recently developed formulations, namely, the combined tangential formulation (CTF) and the electric and magnetic current combined-field integral equation (JMCFIE). Numerical results on canonical objects are consistent with previous results in the literature on ordinary objects. © 2011 IEEE.
Open Access
Analysis of nonequilibrium steady-states
(2016-11) Yeşil, Ayşe Ferhan
Non-equilibrium is the state of the almost all systems in the universe. Unlike equilibrium systems, they interfere with their surroundings which results in never ceasing uxes. There is no unified theory to understand these systems, since their complexity have no bounds. However, there is a restricted subset of them, namely a steady state, in which system maintains constant uxes and its macroscopic observables are not changing in time. Majority of the non-equilibrium problems that the scientific community is interested in comprise systems at steady states or the way such systems relax to steady states, due to their relative ease of analysis. Steady states of Totally Asymmetric Simple Exclusion Processes (TASEPs) are the main focus of this dissertation. We analyze them through Monte Carlo (MC) simulations. The technique is basically a computational experiment done by utilizing random numbers. Performing a computational experiment is a natural way to study these systems since most of the time they are still too complex to have analytical solutions. We present MC simulation results of our studies on the response of TASEP steady states to sinusoidal boundary oscillations. Typically over-damped systems, such as TASEPs, give monotonous frequency response to sinusoidal driving. However, there are exceptions to these all which draw significant attention from the community, e.g., stochastic resonance. We report a novel resonance phenomena on over-damped systems. We present our results in two different but related works. In our first work, we study the motion of shock profiles of TASEP with single class of particles under oscillatory boundary conditions using MC analysis. We also model its dynamics as a Fokker-Planck (FP) system, which incorporates a retarded-oscillatory force with a static single well potential. We solve the FP system by numerical integration. We showed that amplitudes of statistical quantities in both of these systems, (e.g., average position), display resonant effects and their results are qualitatively very similar. In our second work, we showed that by periodically manipulating the boundary conditions of TASEP with two classes of particles, we can achieve otherwise unreachable states of the system by the same parameters. We also report the hysteresis behavior in the same system, existence of which leads to the identifi- cation of typical velocity of the system. All these phenomena are the results of resonant response of the particle number density of the system.
Open Access
Atomic and electronic structure of carbon strings
(IOP Publishing Ltd., 2005) Tongay, S.; Dag, S.; Durgun, Engin; Senger, R. T.; Çıracı, Salim
This paper presents an extensive study of various string and tubular structures formed by carbon atomic chains. Our study is based on first-principles pseudopotential plane wave and finite-temperature ab initio molecular dynamics calculations. Infinite- and finite-length carbon chains exhibit unusual mechanical and electronic properties such as large cohesive energy, axial strength, high conductance, and overall structural stability even at high temperatures. They are suitable for structural and chemical functionalizations. Owing to their flexibility and reactivity they can form linear chain, ring, helix, two-dimensional rectangular and honeycomb grids, three-dimensional cubic networks, and tubular structures. Metal-semiconductor heterostructures and various quantum structures, such as multiple quantum wells and double-barrier resonant tunnelling structures, can be formed from the junctions of metallic carbon and semiconducting BN linear chains. Analysis of atomic and electronic structures of these periodic, finite, and doped structures reveals fundamentally and technologically interesting features, such as structural instabilities and chiral currents. The double covalent bonding of carbon atoms depicted through self-consistent charge density analysis underlies the chemical, mechanical, and electronic properties.
Open Access
Designing materials with desired electromagnetic properties
(Wiley, 2006) Bulu, I.; Cağlayan, H.; Özbay, Ekmel
In this work, we suggest and demonstrate a robust method to tune the plasma frequencies of wire mediums. The method we suggest involves the use of two or more wire arrangements in the unit cell. By incorporating the method we suggested it is possible to tune the plasma frequencies of wire mediums effectively by use of lower metal densities. In addition, we study the effective permittivities and permeabilities of labyrinth based metamaterials. Our results show that the effective permeability of the labyrinth based metamaterial medium is negative above a certain frequency. The results of the effective permittivity calculations for the labyrinth based metamaterial medium reveal that the labyrinth structure exhibits a strong dielectric response near the magnetic resonance frequency. Finally, we design labyrinth based left-handed mediums that have several desired properties such as simultaneous μ, ε = -1 and μ, ε = 0. © 2006 Wiley Periodicals, Inc.
Open Access
Directional selectivity through the subwavelength slit in metallic gratings
(IEEE, 2011) Çakmakyapan, Semih; Çaglayan, Hümeyra; Serebryannikov, Andriy; Özbay, Ekmel
An approach for obtaining strong directional selectivity through a single subwavelength slit in non-symmetric metallic gratings is shown theoretically and experimentally. Directionality effect originates from the different resonance frequencies of two interfaces. © 2011 OSA.
Open Access
Directivity enhancement and deflection of the beam emitted from a photonic crystal waveguide via defect coupling
(Optical Society of American (OSA), 2007) Guven, K.; Özbay, Ekmel
We experimentally and numerically investigate the spatial distribution of the emission from a photonic crystal waveguide, coupled with defects, that are located at the output edge. Two defects that are located symmetrically enhance the directivity of the beam compared to that of a plain waveguide, as was reported in recently conducted theoretical work. We further demonstrate that a single defect deflects of the beam. By choosing the defect resonance that is close to the edge of the pass band of the waveguide, where the group velocity of the beam within the waveguide is slow, a significant amount of deflection can be achieved. © 2007 Optical Society of America.
Open Access
Dynamic tuning of plasmon resonance in the visible using graphene
(The Optical Society, 2016) Balci, S.; Balci, O.; Kakenov, N.; Atar, F. B.; Kocabas, C.
We report active electrical tuning of plasmon resonance of silver nanoprisms (Ag NPs) in the visible spectrum. Ag NPs are placed in close proximity to graphene which leads to additional tunable loss for the plasmon resonance. The ionic gating of graphene modifies its Fermi level from 0.2 to 1 eV, which then affects the absorption of graphene due to Pauli blocking. Plasmon resonance frequency and linewidth of Ag NPs can be reversibly shifted by 20 and 35 meV, respectively. The coupled graphene-Ag NPs system can be classically described by a damped harmonic oscillator model. Atomic layer deposition allows for controlling the graphene-Ag NP separation with atomic-level precision to optimize coupling between them.
Open Access
EFIE and MFIE, why the difference?
(IEEE, 2008-07) Chew W.C.; Davis, C. P.; Warnick, K. F.; Nie, Z. P.; Hu, J.; Yan, S.; Gürel, Levent
EFIE (electric field integral equation) suffers from internal resonance, and the remedy is to use MFIE (magnetic field integral equation) to come up with a CFIE (combined field integral equation) to remove the internal resonance problem. However, MFIE is fundamentally a very different integral equation from EFIE. Many questions have been raised about the differences.
Open Access
Electromagnetic scattering of THz waves from a microsize graphene-sandwiched thin dielectric strip
(IEEE, 2018-07) Oğuzer, T.; Altıntaş, Ayhan
Two-dimensional (2-D) scattering of the H-polarized plane wave by a composite flat material strip is investigated. It is made as graphene-dielectric-graphene sandwich-like structure which is placed in the free space. Our modeling uses singular integral equations and Nystrom discretization. The total scattering cross-section and the absorption cross-section are computed, together with the relative error plots for the current and the far field. The surface plasmon resonances on the graphene strips and the thin dielectric layer performance are evaluated.
Open Access
Electronic transport through a kink in an electron waveguide
(Institute of Electrical and Electronics Engineers, 1994) Yalabik, M. C.
The current-voltage denendence correspondinp to electronic transport through a kink in an electronic waveguide is analyzed. No phase breaking dissipation mechanisms are considered, but the effects of the Coulomb interaction are included through a self consistent approximation. The results indicate very nonlinear transport properties, including negative differential resistance and bistability. © 1994 IEEE
Open Access
Enhanced spontaneous emission in semiconductor nanocrystal solids using resonant energy transfer for integrated devices
(IEEE, 2008-11) Nizamoğlu, Sedat; Demir, Hilmi Volkan
Size-tuneable optical properties of semiconductor nanocrystal (NC) quantum dots make them attractive for a wide range of device applications. However, in these device applications, nanocrystals typically suffer from relatively low quantum efficiency (QE) when they are cast into solid form. To reduce the effect of this problem, we propose and demonstrate the enhancement of spontaneous emission in nanocrystal solids by recycling their trapped excitons through resonant nonradiative Forster energy transfer (ET) for hybrid integrated devices. For this purpose, we designed closely packed CdSe/ZnS core/shell nanocrystal emitters with an energy gradient of approximately 160 meV integrated on LEDs.
Open Access
Enhanced transmission of microwave radiation in one-dimensional metallic gratings with subwavelength aperture
(American Institute of Physics, 2004) Akarca-Biyikli, S. S.; Bulu, I.; Özbay, Ekmel
We report a theoretical and experimental demonstration of enhanced microwave transmission through subwavelength apertures in metallic structures with double-sided gratings. Three different types of aluminum gratings (sinusoidal, symmetric rectangular, and asymmetric rectangular shaped) are designed and analyzed. Our samples have a periodicity of 16 mm, and a slit width of 2 mm. Transmission measurements are taken in the 10–37.5 GHz frequency spectrum, which corresponds to 8–30 mm wavelength region. All three structures display significantly enhanced transmission around surface plasmon resonance frequencies. The experimental results agree well with finite-difference-time-domain based theoretical simulations. Asymmetric rectangular grating structure exhibits the best results with ,50% transmission at 20.7 mm, enhancement factor of ,25, and ±4° angular divergence.
Open Access
Experimental study of linear closed-loop control of subsonic cavity flow
(2006) Yan P.; Debiasi, M.; Yuan X.; Little J.; Özbay, Hitay; Samimy, M.
A study is presented of the modeling and implementation of different concepts for linear feedback control of a single-mode resonance shallow cavity flow. When a physics-based linear model is used for cavity pressure oscillations-, an H∞ controller was designed and tested experimentally. It significantly reduced the main Rossiter mode for which it was designed, while leading to strong oscillations at other Rossiter modes. Other linear control methods such as Smith predictor controller and proportional integral derivative (PID) controller exhibited similar results. The ineffectiveness of using fixed linear models in the design of controllers for the cavity flows is discussed. A modification of the PID design produced a parallel-proportional with time-delay controller that remedied this problem by placing zeros at the frequencies corresponding to other resonance states. Interestingly, it was observed that introducing the same zero to the H∞ controller can also successfully avoid the strong oscillations at other Rossiter modes otherwise observed in the single-mode-based design. The parallel-proportional with time-delay controller was compared to a very effective open-loop method for reducing cavity resonance and exhibited superior robustness with respect to departure of the Mach number from the design conditions. An interpretation is presented for the physical mechanisms by which the open-loop forcing and the parallel-proportional with time-delay controllers reduce the cavity flow noise. The results support the idea that both controls induce in the system a rapid switching between modes competing for the available energy that can be extracted from the mean flow.
Open Access
Fano effect in a double T-shaped interferometer
(Springer, 2009) Moldoveanu, V.; Dinu, I. V.; Tanatar, Bilal
We study the coherent transport in a one-dimensional lead with two side-coupled quantum dots using the Keldysh's Green function formalism.The effect of the interdot Coulomb interaction is taken into account by computing the firstand second order contributions to the self-energy.We show that the Fano interference due to the resonance of one dotis strongly affected by the fixed parameters that characterize the second dot. If the second dot is tuned close to resonance an additionalpeak develops between the peak and dip of the Fano line shape of the current. In contrast, when the second dotis off-resonance and its occupation number is close to unity the interdot Coulomb interaction merely shifts the Fano line and no other maxima appear.The system we consider is more general than the single-dot interferometer studied experimentally by Kobayashi et al. [Phys. Rev. B 70, 035319 (2004)] and may be used for controlling quantum interference and studying decoherence effects in mesoscopic transport.
Open Access
Fast and accurate analysis of large metamaterial structures using the multilevel fast multipole algorithm
(2009) Gürel, Levent; Ergül, Özgür; Ünal, A.; Malas, T.
We report fast and accurate simulations of metamaterial structures constructed with large numbers of unit cells containing split-ring resonators and thin wires. Scattering problems involving various metamaterial walls are formulated rigorously using the electric-field integral equation, discretized with the Rao-Wilton-Glisson basis functions. Resulting dense matrix equations are solved iteratively, where the matrix-vector multiplications are performed efficiently with the multilevel fast multipole algorithm. For rapid solutions at resonance frequencies, convergence of the iterations is accelerated by using robust preconditioning techniques, such as the sparse-approximate-inverse preconditioner. Without resorting to homogenization approximations and periodicity assumptions, we are able to obtain accurate solutions of realistic metamaterial problems discretized with millions of unknowns.
Open Access
Ferroelectric based tuneable SRR based metamaterial for microwave applications
(IEEE, 2007) Özbay, Ekmel; Aydın, Koray; Bütün, Serkan; Kolodziejak, K.; Pawlak, D.
We discuss the possibility of achieving tunable split ring resonators at microwave frequencies. One method is to use varying capacitance values to tune the magnetic resonance frequency. As another method ferroelectric thin films can be employed to obtain active response from the split ring resonators. We report the experimental measurements that are performed for single split ring resonators at microwave frequencies.
Open Access
Flexible strain sensors based on electrostatically actuated graphene flakes
(Institute of Physics Publishing, 2015) Fardindoost, S.; Alipour, A.; Mohammadi, S.; Gökyar, S.; Sarvari, R.; Iraji Zad, A.; Demir, Hilmi Volkan
In this paper we present flexible strain sensors made of graphene flakes fabricated, characterized, and analyzed for the electrical actuation and readout of their mechanical vibratory response in strain-sensing applications. For a typical suspended graphene membrane fabricated with an approximate length of 10 μm, a mechanical resonance frequency around 136 MHz with a quality factor (Q) of ∼60 in air under ambient conditions was observed. The applied strain can shift the resonance frequency substantially, which is found to be related to the alteration of physical dimension and the built-in strain in the graphene flake. Strain sensing was performed using both planar and nonplanar surfaces (bending with different radii of curvature) as well as by stretching with different elongations. © 2015 IOP Publishing Ltd.
Open Access
Förster resonance energy transfer enhanced color-conversion using colloidal semiconductor quantum dots for solid state lighting
(American Institute of Physics, 2009-10-15) Nizamoglu, S.; Demir, Hilmi Volkan
In this paper, we present Förster resonance energy transfer (FRET)-enhanced color-conversion using colloidal semiconductor quantum dot nanocrystals (NCs) to make reddish-orange light-emitting diodes for use in ultraefficient solid state lighting. To achieve FRET enhancement at 614 nm, we use an energy gradient hybrid structure made of cyan- and orange-emitting CdSe/ZnS NCs (λPL =492 and 588 nm in solution, respectively). This enables recycling of trapped excitons using FRET and achieves a relative quantum efficiency enhancement of 15.1% in reddish-orange full color-conversion for the integrated hybrid cyan-orange NC layer with respect to the case of full color-conversion using only orange NCs without FRET.