Browsing by Subject "Intelligent robots"
Now showing 1 - 9 of 9
Results Per Page
Sort Options
Item Open Access Adaptive control design for nonlinear systems via successive approximations(ASME, 2017) Babaei, N.; Salamcı, M. U.; Karakurt, Ahmet HakanThe paper presents an approach to the Model Reference Adaptive Control (MRAC) design for nonlinear dynamical systems. A nonlinear reference system is considered such that its response is designed to be stable via Successive Approximation Approach (SAA). Having designed the stable reference model through the SAA, MRAC is then formulated for nonlinear plant dynamics with a new adaptation rule to guarantee the convergence of the nonlinear plant response to that of the response of the nonlinear reference model. The proposed design methodology is illustrated with examples for different case studies.Item Open Access Effects of linear filter on stability and performance of human-in-the-loop model reference adaptive control architectures(ASME, 2017) Yousefi, Ehsan; Demir, Didem Fatma; Sipahi, R.; Yücelen, T.; Yıldız, YıldırayModel reference adaptive control (MRAC) can effectively handle various challenges of the real world control problems including exogenous disturbances, system uncertainties, and degraded modes of operations. In human-in-the-loop settings, MRAC may cause unstable system trajectories. Basing on our recent work on the stability of MRAC-human dynamics, here we follow an optimization based computations to design a linear filter and study whether or not this filter inserted between the human model and MRAC could help remove such instabilities, and potentially improve performance. To this end, we present a mathematical approach to study how the error dynamics of MRAC could favorably or detrimentally influence human operator's error dynamics in performing a certain task. An illustrative numerical example concludes the study.Item Open Access Kinect based intelligent wheelchair navigation with potential fields(IEEE, 2014) Özçelikörs, M.; Çoşkun, A.; Say, M. Girayhan; Yazici, A.; Yayan, U.; Akçakoca, M.Increasing elderly people population and people with disabilities constitute a huge demand for wheelchairs. Wheelchairs have an important role on improving the lives and mobilization of people with disabilities. Moreover, autonomous wheelchairs constitute a suitable research platform for academic and industrial researchers. In this study, Finite state machine (FSM) based high-level controller and Kinect based navigation algorithm have been developed for ATEKS (Intelligent Wheelchair) which has high-tech control mechanisms, low-cost sensors and open source software (ROS, GAZEBO, ANDROID). © 2014 IEEE.Item Open Access Morphological surface profile extraction from multiple sonars(IEEE, 1998) Başkent, Deniz; Barshan, BillurThis paper presents a novel method for surface profile determination using multiple sensors. Our approach is based on morphological processing techniques to fuse the range data from multiple sensor returns in a manner that directly reveals the target surface profile. The method has the intrinsic ability of suppressing spurious readings due to noise, crosstalk, and higher-order reflections, as well as processing multiple reflections informatively. The algorithm is verified both by simulations and experiments in the laboratory by processing real sonar data obtained from a mobile robot. The results are compared to those obtained from a more accurate structured-light system, which is however more complex and expensive.Item Open Access A new method for range estimation using simple infrared sensors(IEEE, 2005-08) Yüzbaşıoǧlu, Çağrı; Barshan, BillurWe describe a new method for position estimation of planar surfaces using simple, low-cost infrared (IR) sensors. The intensity data acquired with IR sensors depends highly on the surface properties and the configuration of the sensors with respect to the surface. Therefore, in many related studies, either the properties of the surface are determined first or certain assumptions about the surface are made to estimate the distance and the orientation of the surface relative to the sensors. We propose a novel method for position estimation of surfaces with IR sensors without the need to determine the surface properties first. The method is considered to be independent of the type of surface encountered since it is based on searching the position of the maximum value of the intensity data rather than using absolute intensity values. The method is verified experimentally with planar surfaces of different surface properties. An intelligent feature of our system is that its operating range is made adaptive based on the maximum intensity of the detected signal. The absolute mean range error for the method resulting in the lowest errors is 0.15 cm over the range from 10 to 50 cm. The cases where the azimuth and elevation angles are nonzero are considered as well. The results obtained demonstrate that IR sensors can be used for localization to an unexpectedly high accuracy without prior knowledge of the surface characteristics. © 2005 IEEE.Item Open Access Reactive footstep planning for a planar spring mass hopper(IEEE, 2009-10) Arslan, Ömür; Saranlı, Uluç; Morgül, ÖmerThe main driving force behind research on legged robots has always been their potential for high performance locomotion on rough terrain and the outdoors. Nevertheless, most existing control algorithms for such robots either make rigid assumptions about their environments (e.g flat ground), or rely on kinematic planning at low speeds. Moreover, the traditional separation of planning from control often has negative impact on the robustness of the system against model uncertainty and environment noise. In this paper, we introduce a new method for dynamic, fully reactive footstep planning for a simplified planar spring-mass hopper, a frequently used model for running behaviors. Our approach is based on a careful characterization of the model dynamics and an associated deadbeat controller, used within a sequential composition framework. This yields a purely reactive controller with a very large, nearly global domain of attraction that requires no explicit replanning during execution. Finally, we use a simplified hopper in simulation to illustrate the performance of the planner under different rough terrain scenarios and show that it is extremely robust to both model uncertainty and measurement noise. © 2009 IEEE.Item Open Access A robotic software for intelligent applications(2013) Güzel, M.S.; Hinislioǧlu, Y.This study addresses the development of a novel intelligent robotic software system which can control a low-cost five DOF robotic arm and allows the robot to be able to play Tic-Tac-Toe, a simple board game. The paper first aims to introduce proposed software and then details the application developed, including image processing, and decision making steps. © 2013 ISAROB.Item Open Access Spatial reasoning via deep vision models for robotic sequential manipulation(Institute of Electrical and Electronics Engineers , 2023-10-01) Zhou, H.; Schubert, I.; Toussaint, M.; Öğüz, Salih ÖzgürIn this paper, we propose using deep neural architectures (i.e., vision transformers and ResNet) as heuristics for sequential decision-making in robotic manipulation problems. This formulation enables predicting the subset of objects that are relevant for completing a task. Such problems are often addressed by task and motion planning (TAMP) formulations combining symbolic reasoning and continuous motion planning. In essence, the action-object relationships are resolved for discrete, symbolic decisions that are used to solve manipulation motions (e.g., via nonlinear trajectory optimization). However, solving long-horizon tasks requires consideration of all possible action-object combinations which limits the scalability of TAMP approaches. To overcome this combinatorial complexity, we introduce a visual perception module integrated with a TAMP-solver. Given a task and an initial image of the scene, the learned model outputs the relevancy of objects to accomplish the task. By incorporating the predictions of the model into a TAMP formulation as a heuristic, the size of the search space is significantly reduced. Results show that our framework finds feasible solutions more efficiently when compared to a state-of-the-art TAMP solver.Item Open Access Tactile perception by friction induced vibrations(2011) Fagiani, R.; Massi, F.; Chatelet, E.; Berthier, Y.; Akay, A.When a finger moves to scan the surface of an object (haptic sensing), the sliding contact generates vibrations that propagate in the finger skin activating the receptors (mechanoreceptors) located in the skin, allowing the brain to identify objects and perceive information about their properties. The information about the surface of the object is transmitted through vibrations induced by friction between the skin and the object scanned by the fingertip. The mechanoreceptors transduce the stress state into electrical impulses that are conveyed to the brain. A clear understanding of the mechanisms of the tactile sensing is fundamental to numerous applications, like the development of artificial tactile sensors for intelligent prostheses or robotic assistants, and in ergonomics. While the correlation between surface roughness and tactile sensation has already been reported in literature, the vibration spectra induced by the finger-surface scanning and the consequent activation of the mechanoreceptors on the skin have received less attention. In this paper, frequency analysis of signals characterizing surface scanning is carried out to investigate the vibration spectrum measured on the finger and to highlight the changes shown in the vibration spectra as a function of characteristic contact parameters such as scanning speed, roughness and surface texture. An experimental set-up is developed to recover the vibration dynamics by detecting the contact force and the induced vibrations; the bench test has been designed to guarantee reproducibility of measurements at the low amplitude of the vibrations of interest, and to perform measurements without introducing external noise. Two different perception mechanisms, as a function of the roughness wavelength, have been pointed out. The spectrum of vibration obtained by scanning textiles has been investigated. © 2011 Elsevier Ltd. All rights reserved.