Browsing by Subject "Accelerometer"

Now showing 1 - 14 of 14

Open Access
A novel heuristic fall-detection algorithm based on double thresholding, fuzzy logic, and wearable motion sensor data
(Institute of Electrical and Electronics Engineers, 2023-05-25) Barshan, Billur; Turan, M. S.
We present a novel heuristic fall-detection algorithm based on combining double thresholding of two simple features with fuzzy logic techniques. We extract the features from the acceleration and gyroscopic data recorded from a waist-worn motion sensor unit. We compare the proposed algorithm to 15 state-of-the-art heuristic fall-detection algorithms in terms of five performance metrics and runtime on a vast benchmarking fall data set that is publicly available. The data set comprises recordings from 2880 short experiments (1600 fall and 1280 non-fall trials) with 16 participants. The proposed algorithm exhibits superior average accuracy (98.45%), sensitivity (98.31%), and F-measure (98.59%) performance metrics with a runtime that allows real-time operation. Besides proposing a novel heuristic fall-detection algorithm, this work has comparative value in that it provides a fair comparison on the relative performances of a considerably large number of existing heuristic algorithms with the proposed one, based on the same data set. The results of this research are encouraging in the development of fall-detection systems that can function in the real world for reliable and rapid fall detection.
Open Access
Activity recognition invariant to position and orientation of wearable motion sensor units
(2019-04) Yurtman, Aras
We propose techniques that achieve invariance to the placement of wearable motion sensor units in the context of human activity recognition. First, we focus on invariance to sensor unit orientation and develop three alternative transformations to remove from the raw sensor data the effect of the orientation at which the sensor unit is placed. The first two orientation-invariant transformations rely on the geometry of the measurements, whereas the third is based on estimating the orientations of the sensor units with respect to the Earth frame by exploiting the physical properties of the sensory data. We test them with multiple state-of-the-art machine-learning classifiers using five publicly available datasets (when applicable) containing various types of activities acquired by different sensor configurations. We show that the proposed methods achieve a similar accuracy with the reference system where the units are correctly oriented, whereas the standard system cannot handle incorrectly oriented sensors. We also propose a novel non-iterative technique for estimating the orientations of the sensor units based on the physical and geometrical properties of the sensor data to improve the accuracy of the third orientation-invariant transformation. All of the three transformations can be integrated into the pre-processing stage of existing wearable systems without much effort since we do not make any assumptions about the sensor configuration, the body movements, and the classification methodology. Secondly, we develop techniques that achieve invariance to the positioning of the sensor units in three ways: (1) We propose transformations that are applied on the sensory data to allow each unit to be placed at any position within a pre-determined body part. (2) We propose a transformation technique to allow the units to be interchanged so that the user does not need to distinguish between them before positioning. (3) We employ three different techniques to classify the activities based on a single sensor unit, whereas the training set may contain data acquired by multiple units placed at different positions. We combine (1) with (2) and also with (3) to achieve further robustness to sensor unit positioning. We evaluate our techniques on a publicly available dataset using seven state-of-the-art classifiers and show that the reduction in the accuracy is acceptable, considering the exibility, convenience, and unobtrusiveness in the positioning of the units. Finally, we combine the position- and orientation-invariant techniques to simultaneously achieve both. The accuracy values are much higher than those of random decision making although some of them are significantly lower than the reference system with correctly placed units. The trade-off between the exibility in sensor unit placement and the classification accuracy indicates that different approaches may be suitable for different applications.
Open Access
Activity recognition invariant to sensor orientation with wearable motion sensors
(MDPI AG, 2017) Yurtman, A.; Barshan, B.
Most activity recognition studies that employ wearable sensors assume that the sensors are attached at pre-determined positions and orientations that do not change over time. Since this is not the case in practice, it is of interest to develop wearable systems that operate invariantly to sensor position and orientation. We focus on invariance to sensor orientation and develop two alternative transformations to remove the effect of absolute sensor orientation from the raw sensor data. We test the proposed methodology in activity recognition with four state-of-the-art classifiers using five publicly available datasets containing various types of human activities acquired by different sensor configurations. While the ordinary activity recognition system cannot handle incorrectly oriented sensors, the proposed transformations allow the sensors to be worn at any orientation at a given position on the body, and achieve nearly the same activity recognition performance as the ordinary system for which the sensor units are not rotatable. The proposed techniques can be applied to existing wearable systems without much effort, by simply transforming the time-domain sensor data at the pre-processing stage. © 2017 by the authors. Licensee MDPI, Basel, Switzerland.
Open Access
Activity recognition invariant towearable sensor unit orientation using differential rotational transformations represented by quaternions
(MDPI AG, 2018) Yurtman, Aras; Barshan, Billur; Fidan B.
Wearable motion sensors are assumed to be correctly positioned and oriented in most of the existing studies. However, generic wireless sensor units, patient health and state monitoring sensors, and smart phones and watches that contain sensors can be differently oriented on the body. The vast majority of the existing algorithms are not robust against placing the sensor units at variable orientations. We propose a method that transforms the recorded motion sensor sequences invariantly to sensor unit orientation. The method is based on estimating the sensor unit orientation and representing the sensor data with respect to the Earth frame. We also calculate the sensor rotations between consecutive time samples and represent them by quaternions in the Earth frame. We incorporate our method in the pre-processing stage of the standard activity recognition scheme and provide a comparative evaluation with the existing methods based on seven state-of-the-art classifiers and a publicly available dataset. The standard system with fixed sensor unit orientations cannot handle incorrectly oriented sensors, resulting in an average accuracy reduction of 31.8%. Our method results in an accuracy drop of only 4.7% on average compared to the standard system, outperforming the existing approaches that cause an accuracy degradation between 8.4 and 18.8%. We also consider stationary and non-stationary activities separately and evaluate the performance of each method for these two groups of activities. All of the methods perform significantly better in distinguishing non-stationary activities, our method resulting in an accuracy drop of 2.1% in this case. Our method clearly surpasses the remaining methods in classifying stationary activities where some of the methods noticeably fail. The proposed method is applicable to a wide range of wearable systems to make them robust against variable sensor unit orientations by transforming the sensor data at the pre-processing stage.
Open Access
Classifying daily and sports activities invariantly to the positioning of wearable motion sensor units
(IEEE, 2020) Barshan, Billur; Yurtman, Aras
We propose techniques that achieve invariance to the positioning of wearable motion sensor units on the body for the recognition of daily and sports activities. Using two sequence sets based on the sensory data allows each unit to be placed at any position on a given rigid body part. As the unit is shifted from its ideal position with larger displacements, the activity recognition accuracy of the system that uses these sequence sets degrades slowly, whereas that of the reference system (which is not designed to achieve position invariance) drops very fast. Thus, we observe a tradeoff between the flexibility in sensor unit positioning and the classification accuracy. The reduction in the accuracy is at acceptable levels, considering the convenience and flexibility provided to the user in the placement of the units. We compare the proposed approach with an existing technique to achieve position invariance and combine the former with our earlier methodology to achieve orientation invariance. We evaluate our proposed methodology on a publicly available data set of daily and sports activities acquired by wearable motion sensor units. The proposed representations can be integrated into the preprocessing stage of existing wearable systems without significant effort.
Open Access
Comparative study on classifying human activities with miniature inertial and magnetic sensors
(Elsevier, 2010) Altun, K.; Barshan, B.; Tunçel, O.
This paper provides a comparative study on the different techniques of classifying human activities that are performed using body-worn miniature inertial and magnetic sensors. The classification techniques implemented and compared in this study are: Bayesian decision making (BDM), a rule-based algorithm (RBA) or decision tree, the least-squares method (LSM), the k-nearest neighbor algorithm (k-NN), dynamic time warping (DTW), support vector machines (SVM), and artificial neural networks (ANN). Human activities are classified using five sensor units worn on the chest, the arms, and the legs. Each sensor unit comprises a tri-axial gyroscope, a tri-axial accelerometer, and a tri-axial magnetometer. A feature set extracted from the raw sensor data using principal component analysis (PCA) is used in the classification process. A performance comparison of the classification techniques is provided in terms of their correct differentiation rates, confusion matrices, and computational cost, as well as their pre-processing, training, and storage requirements. Three different cross-validation techniques are employed to validate the classifiers. The results indicate that in general, BDM results in the highest correct classification rate with relatively small computational cost.
Open Access
Detection and evaluation of physical therapy exercises by dynamic time warping using wearable motion sensor units
(Springer, 2014) Yurtman, Aras; Barshan, Billur
We develop an autonomous system that detects and evaluates physical therapy exercises using wearable motion sensors. We propose an algorithm that detects all the occurrences of one or more template signals (representing exercise movements) in a long signal acquired during a physical therapy session. In matching the signals, the algorithm allows some distortion in time, based on dynamic time warping (DTW). The algorithm classifies the executions in one of the exercises and evaluates them as correct/incorrect, giving the error type if there is any. It also provides a quantitative measure of similarity between each matched execution and its template. To evaluate the performance of the algorithm in physical therapy, a dataset consisting of one template execution and ten test executions of each of the three execution types of eight exercises performed by five subjects is recorded, having a total of 120 and 1,200 exercise executions in the training and test sets, respectively, as well as many idle time intervals in the test signals. The proposed algorithm detects 1,125 executions in the whole test set. 8.58 % of the 1,200 executions are missed and 4.91 % of the idle time intervals are incorrectly detected as executions. The accuracy is 93.46 % only for exercise classification and 88.65 % for simultaneous exercise and execution type classification. The proposed system may be used for both estimating the intensity of the physical therapy session and evaluating the executions to provide feedback to the patient and the specialist.
Open Access
Düşme tespiti için sınıflandırma yöntemlerinin karşılaştırılması
(IEEE, 2014-04) Çatalbaş, Bahadır; Yücesoy, Burak; Seçer, G.; Aslan, Murat
Bu bildiride giyilebilir yapıda olan ve üç boyutlu ölçüm alabilen bir ivmeölçerin çıktılarını kullanarak düşme tespiti yapan farklı algoritmaların karşılaştırılması yapılmıştır. Karşılaştırma amacıyla destek vektör makineleri, yapay sinir ağları ile elde edilen sınıflandırıcılar ve kural bazlı bir sınıflandırıcı kullanılmıştır. Sınıflandırıcıların tasarlanması ve dogrulanması amacıyla 7 farklı denekten üçer defa düşme ve düşme dışındaki günlük aktivitelere ilişkin ivmeölçer verileri toplanmıştır. Yapılan karşılaştırma sonucunda tespit doğruluğu en yüksek algoritmanın %87,76 ile destek vektör makineleri olduğu bulunmuştur. En yüksek düşme tespit oranı da %90,91 ˘ olarak kural bazlı sınıflandırıcı kullanımıyla elde edilmiştir. En yüksek özgüllük oranı %89,47 ile yine destek vektör makineleri ile elde edilmiştir.
Open Access
Fizik tedavi egzersizlerinin giyilebilir hareket algılayıcıları işaretlerinden dinamik zaman bükmesiyle sezimi ve değerlendirilmesi
(IEEE, 2014-04) Yurtman, Aras; Barshan, Billur
Giyilebilir hareket algılayıcılarından kaydedilen sinyalleri işleyerek fizik tedavi egzersizlerini algılamak ve değerlendirmek için özerk bir sistem geliştirilmiştir. Bir fizik tedavi seansındaki bir ya da birden fazla egzersiz tipini algılamak için, temeli dinamik zaman bükmesi (DZB) benzeşmezlik ölçütüne dayanan bir algoritma geliştirilmiştir. Algoritma, egzersizlerin doğru ya da yanlış yapıldığını değerlendirmekte ve varsa hata türünü saptamaktadır. Algoritmanın başarımını degerlendirmek için, beş katılımcı tarafından yapılan sekiz egzersiz hareketinin üç yürütüm türü için birer şablon ve 10’ar sınama yürütümünden oluşan bir veri kümesi kaydedilmiştir. Dolayısıyla, eğitim ve sınama kümelerinde sırasıyla 120 ve 1,200 egzersiz yürütümü bulunmaktadır. Sınama kümesi, boş zaman dilimleri de içermektedir. Öne sürülen algoritma, sınama kümesindeki 1,200 yürütümün % 8.58’ini kaçırmakta ve boş zaman dilimlerinin % 4.91’ini yanlış sezim olarak değerlendirerek toplam 1,125 yürütüm algılamaktadır. Doğruluk, sadece egzersiz sınıflandırması ele alındığında ˘ % 93.46, hem egzersiz hem de yürütüm türü sınıflandırması içinse % 88.65’tir. Sistemin bilinmeyen egzersizlere karşı davranışını sınamak için, algoritma, her egzersiz için, o egzersizin şablonları dışarıda bırakılarak çalıştırılmış ve 1,200 egzersizin sadece 10’u yanlış sezilmiştir. Bu sonuç, sistemin bilinmeyen hareketlere karşı gürbüz olduğunu göstermektedir. Öne sürülen sistem, hem bir fizik tedavi seansının yoğunluğunu kestirmek, hem de hastaya ve fizik tedavi uzmanına geribildirim vermek amacıyla egzersiz hareketlerini değerlendirmek için kullanılabilir.
Open Access
Improvements in deterministic error modeling and calibration of inertial sensors and magnetometers
(Elsevier B.V., 2016) Secer, G.; Barshan, B.
We consider the deterministic modeling, calibration, and model parameter estimation of two commonly employed inertial measurement units based on real test data acquired from a flight motion simulator. Each unit comprises three tri-axial devices: an accelerometer, a gyroscope, and a magnetometer. We perform the deterministic error modeling and calibration of accelerometers based on an improved measurement model, and the technique we propose for gyroscopes lowers costs by eliminating the need for additional sensors and relaxing the test bed requirement. We present an extended measurement model for magnetometers that reduces calibration errors by modeling orientation-dependent hard-iron errors in a gimbaled angular position-control machine. While we employ the model-based Levenberg-Marquardt optimization algorithm for the parameter estimation of accelerometers and magnetometers, we use a model-free evolutionary optimization algorithm (particle swarm optimization) for estimating the calibration parameters of gyroscopes. Errors are considerably reduced as a result of proper modeling and calibration. © 2016 Elsevier B.V.
Open Access
Investigating inter-subject and inter-activity variations in activity recognition using wearable motion sensors
(Oxford University Press, 2016) Barshan, B.; Yurtman, A.
This work investigates inter-subject and inter-activity variability of a given activity dataset and provides some new definitions to quantify such variability. The definitions are sufficiently general and can be applied to a broad class of datasets that involve time sequences or features acquired using wearable sensors. The study is motivated by contradictory statements in the literature on the need for user-specific training in activity recognition. We employ our publicly available dataset that contains 19 daily and sports activities acquired from eight participants who wear five motion sensor units each. We pre-process recorded activity time sequences in three different ways and employ absolute, Euclidean and dynamic time warping distance measures to quantify the similarity of the recorded signal patterns. We define and calculate the average inter-subject and inter-activity distances with various methods based on the raw and pre-processed time-domain data as well as on the raw and pre-processed feature vectors. These definitions allow us to identify the subject who performs the activities in the most representative way and pinpoint the activities that show more variation among the subjects. We observe that the type of pre-processing used affects the results of the comparisons but that the different distance measures do not alter the comparison results as much. We check the consistency of our analysis and results by highlighting some of our activity recognition rates based on an exhaustive set of sensor unit, sensor type and subject combinations. We expect the results to be useful for dynamic sensor unit/type selection, for deciding whether to perform user-specific training and for designing more effective classifiers in activity recognition.
Open Access
Novel noniterative orientation estimation for wearable motion sensor units acquiring accelerometer, gyroscope, and magnetometer measurements
(IEEE, 2020) Yurtman, Aras; Barshan, Billur
We propose a novel noniterative orientation estimation method based on the physical and geometrical properties of the acceleration, angular rate, and magnetic field vectors to estimate the orientation of motion sensor units. The proposed algorithm aims that the vertical (up) axis of the earth coordinate frame is as close as possible to the measured acceleration vector and that the north axis of the earth makes an angle with the detected magnetic field vector as close as possible to the estimated value of the magnetic dip angle. We obtain the sensor unit orientation based on the rotational quaternion transformation between the earth and the sensor unit frames. We evaluate the proposed method by incorporating it into an activity recognition scheme for daily and sports activities, which requires accurately estimated sensor unit orientations to achieve invariance to the orientations at which the units are worn on the body. Using four different classifiers on a publicly available data set, the proposed methodology achieves an average activity recognition accuracy higher than the state-of-the-art methods, as well as being computationally efficient enough to be executed in real time.
Open Access
Position invariance for wearables: interchangeability and single-unit usage via machine learning
(IEEE, 2021) Yurtman, Aras; Barshan, Billur; Redif, S.
We propose a new methodology to attain invariance to the positioning of body-worn motion-sensor units for recognizing everyday and sports activities. We first consider random interchangeability of the sensor units so that the user does not need to distinguish between them before wearing. To this end, we propose to use the compact singular value decomposition (SVD) that significantly reduces the accuracy degradation caused by random interchanging of the units. Secondly, we employ three variants of a generalized classifier that requires wearing only a single sensor unit on any one of the body parts to classify the activities. We combine both approaches with our previously developed methods to achieve invariance to both position and orientation, which ultimately allows the user significant flexibility in sensor-unit placement (position and orientation). We assess the performance of our proposed approach on a publicly available activity dataset recorded by body-worn motion-sensor units. Experimental results suggest that there is a tolerable reduction in accuracy, which is justified by the significant flexibility and convenience offered to users when placing the units.
Open Access
Recognizing daily and sports activities in two open source machine learning environments using body-worn sensor units
(Oxford University Press, 2014-11) Barshan, B.; Yüksek, M. C.
This study provides a comparative assessment on the different techniques of classifying human activities performed while wearing inertial and magnetic sensor units on the chest, arms and legs. The gyroscope, accelerometer and the magnetometer in each unit are tri-axial. Naive Bayesian classifier, artificial neural networks (ANNs), dissimilarity-based classifier, three types of decision trees, Gaussian mixture models (GMMs) and support vector machines (SVMs) are considered. A feature set extracted from the raw sensor data using principal component analysis is used for classification. Three different cross-validation techniques are employed to validate the classifiers. A performance comparison of the classifiers is provided in terms of their correct differentiation rates, confusion matrices and computational cost. The highest correct differentiation rates are achieved with ANNs (99.2%), SVMs (99.2%) and a GMM (99.1%). GMMs may be preferable because of their lower computational requirements. Regarding the position of sensor units on the body, those worn on the legs are the most informative. Comparing the different sensor modalities indicates that if only a single sensor type is used, the highest classification rates are achieved with magnetometers, followed by accelerometers and gyroscopes. The study also provides a comparison between two commonly used open source machine learning environments (WEKA and PRTools) in terms of their functionality, manageability, classifier performance and execution times. © 2013 © The British Computer Society 2013. All rights reserved.