Browsing by Subject "TiO"
Now showing 1 - 8 of 8
Results Per Page
Sort Options
Item Open Access Comparative study of optically activated nanocomposites with photocatalytic TiO2 and ZnO nanoparticles for massive environmental decontamination(S P I E - International Society for Optical Engineering, 2007) Tek, S.; Mutlugun, E.; Soganci, I. M.; Perkgoz, N. K.; Yucel, D.; Celiker, G.; Demir, Hilmi VolkanNanocomposites that incorporate TiO2 and ZnO nanoparticles separately in three-dimensional solgel matrices through full chemical integration are prepared to perform highly efficient photocatalytic activities for applications of environmental decontamination. Spectral responses of photocatalytic TiO2 and ZnO nanoparticles exposed to UV activation for self-cleaning process were obtained as also their optical relative spectral efficiency curves from 270 to 370 nm in the UV regime. Our investigations of the optimal conditions to increase their spectral photocatalytic efficiencies resulted in remarkably high levels of optical recovery and efficiency.Item Open Access Direct evidence for the instability and deactivation of mixed-oxide systems: influence of surface segregation and subsurface diffusion(2011) Emmez, E.; Vovk, E. I.; Bukhtiyarov V. I.; Ozensoy, E.In the current contribution, we provide a direct demonstration of the thermally induced surface structural transformations of an alkaline-earth oxide/transition metal oxide interface that is detrimental to the essential catalytic functionality of such mixed-oxide systems toward particular reactants. The BaOx/TiO2/Pt(111) surface was chosen as a model interfacial system where the enrichment of the surface elemental composition with Ti atoms and the facile diffusion of Ba atoms into the underlying TiO2 matrix within 523 873 K leads to the formation of perovskite type surface species (BaTiO3/Ba2TiO4/BaxTiyOz). At elevated temperatures (T > 973 K), excessive surface segregation of Ti atoms results in an exclusively TiO2/TiOx-terminated surface which is almost free of Ba species. Although the freshly prepared BaOx/TiO2/Pt(111) surface can strongly adsorb ubiquitous catalytic adsorbates such as NO2 and CO2, a thermally deactivated surface at T > 973 K practically loses all of its NO2/CO2 adsorption capacity due to the deficiency of surface BaOx domains.Item Open Access Femtosecond laser-induced TiO2 nano structures on titanium(Optical Society of America, 2010) Öktem, Bülent; Kalaycıoğlu, Hamit; İlday, F. ÖmerWe report formation of polarization-dependent nanostructures (nanolines, nanocircles) by high repetition-rate femtosecond laser pulses on titanium surface through a novel mechanism, converting Ti to TiO2. Arbitrarily large-area patterns are created by self-stitching of these patterns. © 2010 Optical Society of America.Item Open Access Ferroelectric based microgyroscope for inertial measurement unit: Modeling and simulation(IEEE, 2012) Ozer, Z.; Mamedov, Amirullah M.; Özbay, EkmelThis paper present the design and modeling of the micro-electromechanical systems (MEMS) on the ternary ferroelectric compounds (PZT and Ba xSr 1-xTiO 3) based by using finite element model (FEM) simulation. © 2012 IEEE.Item Open Access Fine-tuning the dispersion and the mobility of BaO domains on NO x storage materials via TiO2 anchoring sites(American Chemical Society, 2010) Andonova, S. M.; Şentürk, G. S.; Ozensoy, E.In an attempt to control the surface dispersion and the mobility of BaO domains on NOx storage materials, TiO2/TiOx anchoring sites were introduced on/inside the conventional γ-Al 2O3 support matrix. BaO/TiO2/Al 2O3 ternary oxide materials were synthesized via two different sol-gel preparation techniques, with varying surface compositions and morphologies. The synthesized NOx storage materials were studied via XRD, Raman spectroscopy, BET surface area analysis, TPD, XPS, SEM, EDX-mapping, and in situ FTIR spectroscopy of adsorbed NO2. NOx uptake properties of the BaO/TiO2/Al2O3 materials were found to be strongly influenced by the morphology and the surface structure of the TiO2/TiOx domains. An improved Ba surface dispersion was observed for the BaO/TiO2/Al2O3 materials synthesized via the coprecipitation of alkoxide precursors, which was found to originate mostly from the increased fraction of accessible TiO 2/TiOx sites on the surface. These TiO2/ TiOx sites function as strong anchoring sites for surface BaO domains and can be tailored to enhance surface dispersion of BaO. TPD experiments suggested the presence of at least two different types of NOx species adsorbed on the TiO2/TiOx sites, with distinctively different thermal stabilities. The relative stability of the NOx species adsorbed on the BaO/TiO2/Al2O3 system was found to increase in the following order: NO+/N2O 3 on alumina ≪ nitrates on alumina < surface nitrates on BaO < bridged/bidentate nitrates on large/isolated TiO2 clusters < bulk nitrates on BaO on alumina surface and bridged/bidentate nitrates on TiO2 crystallites homogenously distributed on the surface < bulk nitrates on the BaO sites located on the TiO2 domains. © 2010 American Chemical Society.Item Open Access Nature of the Ti-Ba interactions on the BaO/TiO2/Al 2O3 NOx storage system(2009) Andonova, S. M.; Şentürk, G. S.; Kayhan, E.; Ozensoy, E.A ternary oxide-based NO* storage material in the form of BaOZTiO2Zy-Al2O3 was synthesized and characterized. Thermally induced structural changes occurring on the surfaces of the TiO2Zy-Al2O3 and BaOZ TiO 2Zy-Al2O3 systems were studied in a comparative manner within 300-1273 K via X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, and BET surface area analysis. The surface acidity of the studied oxide systems was also investigated via pyridine adsorption monitored by in-situ Fourier transform infrared (FTIR) spectroscopy. BaO/TiO2γ-Al 2O3 ternary oxide was synthesized by incorporating different loadings of (8-20 wt %) BaO onto the TiO2/γ Al 2O3 support material, which was originally prepared using the sol-gel method. In the TiO2Zy-Al2O3 binary oxide support material, anatase phase exhibited a relatively high thermal stability at T < 1073 K. The presence of TiO2 domains on the surface of the alumina particles was found to alter the surface acidity of alumina by providing new medium-strength Lewis acid sites. SEMZEDX results indicate that in the BaO/TiO2γ-Al2O3 system, TiO2 domains present a significant affinity toward BaO and/or Ba(NO3) 2 resulting in a strong Ti-Ba interaction and the formation of overlapping domains on the surface. The presence of TiO2 also leads to a decrease in the decomposition temperature of the Ba(N03) 2 phase with respect to the Ti-free Ba(N03) 2ZyAl2O3 system. Such a destabilization is likely to occur due to a weaker interaction between Ba(N03) 2 and y-Al203 domains in the ternary oxide as well as due to the change in the surface acidity in the presence of TiO 2. At relatively high temperatures (e.g., 873-1273 K) formation of complex structures in the form of BaTiO3, Ba1.23Al 2.46Ti5.54O16, BaTiO5, andor Ba x:AlyTizOn., were also observed. © 2009 American Chemical Society.Item Open Access Structural, microstructural and thermal properties of lead-free bismuth-sodium-barium-titanate piezoceramics synthesized by mechanical alloying(2013) Amini, R.; Ghazanfari, M.R.; Alizadeh, M.; Ardakani H.A.; Ghaffari, M.Bismuth-sodium-barium-titanate piezoceramics with a composition of (Bi 0.5Na0.5)0.94Ba0.06TiO3 (BNBT) were prepared by mechanical alloying (MA). Structural analysis and phase identification were performed by X-ray diffraction (XRD). Microstructural studies and chemical composition homogeneity were performed by scanning electron microscope (SEM) coupled with energy dispersive X-ray analysis (EDX). Furthermore, thermal properties of the as-milled powders were evaluated by thermogravimetry/differential thermal analysis (TG/DTA). During the initial milling, the constituents were transformed to the perovskite, pyrochlore, and BNT phases; in addition, partial amorphization of the structure appeared during the milling cycle. As MA progressed, transformation of pyrochlore-to-perovskite and crystallization of the amorphous phase occurred and also, the BNBT phase was significantly developed. It was found that the MA process has the ability to synthesize the BNBT powders with a submicron particle size, regular morphology, and uniform elemental distribution. © 2012 Elsevier Ltd.Item Open Access Synthesis of stable mesostructured coupled semiconductor thin films: meso-CdS-TiO2 and meso-CdSe-TiO2(2010) Okur, H. İ.; Türker, Y.; Dag, Ö.Cd(II) ions can be incorporated into the channels of mesostructured titania films, using the evaporation-induced self-assembly (EISA) approach, up to a record high Cd/Ti mole ratio of 25%. The film samples were obtained by spin or dip coating from a mixture of 1-butanol, [Cd(H20)4] (N03)2, HNO3, and Ti(OC4H 9)4 and then aging the samples under 50% humidity at 30 0C (denoted as meso-xCd(II)-y TiO2). The nitrate ions, from nitric acid and cadmium nitrate, play important roles in the assembly process by coordinating as bidentate and bridged ligands to Cd(II) and Ti(IV) sites, respectively, in the mesostructured titania films. The film samples can be reacted under a H 2S (or H2Se) gas atmosphere to produce CdS (or CdSe) on the channel surface and/or pore walls. However, the presence of such a large number of nitrate ions in the film samples also yields an extensive amount of nitric acid upon H2S (or H2Se) reaction, where the nanoparticles are not stable (they undergo decomposition back to metal ion and H2S or H2Se gas). However, this problem can be overcome by further aging the samples at 130 °C for a few hours before H2S (or H2Se) reaction. This step removes about 90% of the nitrate ions, eliminates the nitric acid production step, and stabilizes the CdS nanoparticles on the surface and/or walls of the pores of the coupled semiconductor films, denoted as meso-xCdS-yTiO2. However, the H2Se reaction, additionally, needs to be carried at lower H2Se pressures in an N2 atmosphere to produce stable CdSe nanoparticles on the surface and/or walls of the pores of the films, denoted as meso-xCdSe-.yTiO2. Otherwise, an excessive number of Se8 particles form in the film samples.