Browsing by Subject "TEM"

Now showing 1 - 10 of 10

Open Access
Carbon supported nano-sized Pt-Pd and Pt-Co electrocatalysts for proton exchange membrane fuel cells
(2009) Kadirgan, F.; Kannan, A. M.; Atilan, T.; Beyhan, S.; Ozenler, S. S.; Süzer, Şefik; Yörür, A.
Nano-sized Pt-Pd/C and Pt-Co/C electrocatalysts have been synthesized and characterized by an alcohol-reduction process using ethylene glycol as the solvent and Vulcan XC-72R as the supporting material. While the Pt-Pd/C electrodes were compared with Pt/C (20 wt.% E-TEK) in terms of electrocatalytic activity towards oxidation of H2, CO and H2-CO mixtures, the Pt-Co/C electrodes were evaluated towards oxygen reduction reaction (ORR) and compared with Pt/C (20 wt.% E-TEK) and Pt-Co/C (20 wt.% E-TEK) and Pt/C (46 wt.% TKK) in a single cell. In addition, the Pt-Pd/C and Pt-Co/C electrocatalyst samples were characterized by XRD, XPS, TEM and electroanalytical methods. The TEM images of the carbon supported platinum alloy electrocatalysts show homogenous catalyst distribution with a particle size of about 3-4 nm. It was found that while the Pt-Pd/C electrocatalyst has superior CO tolerance compared to commercial catalyst, Pt-Co/C synthesized by polyol method has shown better activity and stability up to 60 °C compared to commercial catalysts. Single cell tests using the alloy catalysts coated on Nafion-212 membranes with H2 and O2 gases showed that the fuel cell performance in the activation and the ohmic regions are almost similar comparing conventional electrodes to Pt-Pd anode electrodes. However, conventional electrodes give a better performance in the ohmic region comparing to Pt-Co cathode. It is worth mentioning that these catalysts are less expensive compared to the commercial catalysts if only the platinum contents were considered.
Open Access
The effect of cucurbit[n]uril on the solubility, morphology, and the photophysical properties of nonionic conjugated polymers in an aqueous medium
(2010) Tuncel, D.; Artar, M.; Hanay, S. B.
The effects of cucurbit[n]uril on the dissolution and the photophysical properties of nonionic conjugated polymers in water are described. For this purpose, a fluorine-based polymer, namely, poly[9,9-bis{6(N,N-dimethylamino) hexyl}fluorene-co-2,5-thienylene (PFT) was synthesized and characterized by spectroscopic techniques including 1D and 2D NMR, UV-vis, fluorescent spectroscopy, and matrix-assisted laser desorption mass spectrometry (MALDI-MS). For the first time, it was demonstrated that a nonionic conjugated polymer can be made soluble in water through an inclusion complex formation with CB8. The structure of the complex was elucidated by NMR experiments including 1H and selective 1D-NOESY. This complex emits green and is highly fluorescent with fluorescent quantum yield of 35%. In contrast, CB6 or water-soluble CB7 although they are chemically identical to CB8 do not have any effect on the dissolution and photophysical properties of PFT. By preparing a protonated version of PFT, the optical properties of PFT in methanol, protonated PFT and PFT@CB8 in water have been studied and compared. It was also observed that the morphology of the polymer PFT was affected by the presence of CB8. Thus CB8-assisted self-assembly of polymer chains leads to vesicles formation; these structures were characterized by DLS, AFM, SEM, and TEM fluorescent optical microscopy.
Open Access
Fe promoted NOx storage materials: structural properties and NOx uptake
(American Chemical Society, 2010) Kayhan, E.; Andonova, S. M.; Şentürk, G. S.; Chusuei, C. C.; Ozensoy, E.
Fe promoted NOx storage materials were synthesized in the form of FeOx/BaO/Al2O3 ternary oxides with varying BaO (8 and 20 wt %) and Fe (5 and 10 wt %) contents. Synthesized NOx storage materials were investigated via TEM, EELS, BET, FTIR, TPD, XRD, XPS, and Raman spectroscopy, and the results were compared with the conventional BaO/Al2O3 NOx storage system. Our results suggest that the introduction of Fe in the BaO/Al2O3 system leads to the formation of additional NOx storage sites which store NOx mostly in the form of bidentate nitrates. NO2 adsorption experiments at 323 K via FTIR indicate that, particularly in the early stages of the NOx uptake, the NOx storage mechanism is significantly altered in the presence of Fe sites where a set of new surface nitrosyl and nitrite groups were detected on the Fe sites and the surface oxidation of nitrites to nitrates is significantly hindered with respect to the BaO/Al2O3 system. Evidence for the existence of both Fe3+ as well as reduced Fe2+/(3-x)+ sites on the freshly pretreated materials was detected via EELS, FTIR, Raman, and XRD experiments. The influence of the Fe sites on the structural properties of the synthesized materials was also studied by performing ex situ annealing protocols within 323-1273 K followed by XRD and Raman experiments where the temperature dependent changes in the morphology and the composition of the surface domains were analyzed in detail. On the basis of the TPD data, it was found that the relative stability of the stored NOx species is influenced by the morphology of the Ba and Fe containing NOx-storage domains. The relative stabilities of the investigated NOx species were found to increase in the following order: N2O3/NO+ < nitrates on γ-Al2O3 < surface nitrates on BaO < bidentate nitrates on FeOx sites < bulk nitrates on BaO.
Open Access
In situ synthesis of biomolecule encapsulated gold-cross-linked poly(ethylene glycol) nanocomposite as biosensing platform: A model study
(Elsevier BV, 2010) Odaci, D.; Kahveci, M.U.; Sahkulubey, E.L.; Ozdemir, C.; Uyar, Tamer; Timur, S.; Yagci Y.
In situ synthesis of poly(ethylene glycol) (PEG) hydrogels containing gold nanoparticles(AuNPs) and glucose oxidase (GOx) enzyme by photo-induced electron transfer process was reported here and applied in electrochemical glucose biosensing as the model system. Newly designed bionanocomposite matrix by simple one-step fabrication offered a good contact between the active site of the enzyme and AuNPs inside the network that caused the promotion in the electron transfer properties that was evidenced by cyclic voltammetryas well as higher amperometric biosensing responses in comparing with response signals obtained from the matrix without AuNPs. As well as some parameters important in the optimization studies such as optimum pH, enzyme loading and AuNP amount, the analytical characteristics of the biosensor (AuNP/GOx) were examined by the monitoring of chronoamperometric response due to the oxygen consumption through the enzymatic reaction at − 0.7 V under optimized conditions at sodium acetate buffer (50 mM, pH 4.0) and the linear graph was obtained in the range of 0.1–1.0 mM glucose. The detection limit (LOD) of the biosensor was calculated as 0.06 mM by using the signal to noise ratio of 3. Moreover, the presence of AuNPs was visualized by TEM. Finally, the biosensor was applied for glucose analysis for some beverages and obtained data were compared with HPLC as the reference method to test the possible matrix effect due to the nature of the samples.
Open Access
Resistive switching mechanism and device applications of ZnO and Ain thin films
(2014) Özcan, Ayşe
Resistive switching memories are potential candidates for next generation nonvolatile memory device applications due to natural simplicity in structure, fast switching speed, long retention time, low power consumption, suitability for 3D integration, excellent scalability and CMOS compatibility. However, the atomic scale mechanisms behind resistive switching are still being debated. In this work we investigate resistive switching mechanisms in ZnO and AlN thin films. The structural and physical changes in ZnO thin films during resistive switching are investigated via TEM, EDX, EFTEM techniques. We also investigate application of resisitive switching to reconfigurable optical surfaces. Recently, resistive switching in nitride films such as AlN is attracting increasing attention. The wide band gap, high electrical resistivity, and high thermal conductivity of AlN make it a good candidate for a resistive switching memory device. We report self-compliant resistive switching behavior in AlN films which is deposited by atomic layer deposition.
Open Access
Role of organic and inorganic additives on the assembly of CTAB-P123 and the morphology of mesoporous silica particles
(2009) Poyraz, A. S.; Dag, Ö.
Mesoporous silica particles with various morphologies and structures have been synthesized by controlling the solubility, micellization, and assembly of a charged surfactant (cethyltrimethylammonium bromide, CTAB) and a pluronic (PEO20PPO70PEO20, P123) couple using an organic (benzene) or an inorganic (SO4 2-, NO3 -, or Cl-) additive. The effect of CTAB, with or without one of the Hofmeister ions or benzene in various concentrations, on the morphology, pore-size, pore-structure and the nature of the silica particles has been investigated. Increasing the lyotropic anion (SO4 2-) or benzene concentration of the synthesis media creates wormlike particles with enlarged pores and reduced wall thickness. However, the hydrotropic anion (NO3 -) influenced the solubility of the charged surfactant and increased the CTAB concentration in the CTAB-P123 micelles, and as a result, in the mesoporous silica particles. The surface area, unit cell, and pore size of the silica particles are diminished by increasing the nitrate ion centration. The effects of the Cl- ion are between the SO4 2- and NO3 -ions. It influenced the P123 at low and CTAB at high concentrations. At low CTAB/ P123 mol ratios, the Cl- ion affects mainly the P123, but at high CTAB/P123 it affects both the CTAB and P123. By carefully adjusting these ingredients (CTAB, SO4 2-, Cl-, NO3 - and benzene), not only the morphology of the particles, but also the pore-size and pore-structure of the mesoporous silica particles could be adjusted. The investigations were carried out by preparing a series of powder samples and, by varying the CTAB/P123 mol ratio (between 3.0 and 6.0) and the concentration of the organic (0.17 to 0.90 M) or inorganic (at 0.25, 0.50, or 1.00 M) additive in the synthesis media. The powder samples were analyzed using microscopy (SEM, TEM, and POM), diffraction (PXRD), and spectroscopy (FTIR, Raman, UV-vis, and EDS) techniques toward above goals. © 2009 American Chemical Society.
Open Access
Self-assembled template-directed synthesis of one-dimensional silica and titania nanostructures
(2011) Acar H.; Garifullin, R.; Güler, Mustafa O.
Mineralized biological materials such as shells, skeleton, and teeth experience biomineralization. Biomimetic materials exploit the biomineralization process to form functional organic-inorganic hybrid nanostructures. In this work, we mimicked the biomineralization process by the de novo design of an amyloid-like peptide that self-assembles into nanofibers. Chemically active groups enhancing the affinity for metal ions were used to accumulate silicon and titanium precursors on the organic template. The self-assembly process and template effect were characterized by CD, FT-IR, UV-vis, fluorescence, rheology, TGA, SEM, and TEM. The self-assembled organic nanostructures were exploited as a template to form high-aspect-ratio 1-D silica and titania nanostructures by the addition of appropriate precursors. Herein, a new bottom-up approach was demonstrated to form silica and titania nanostructures that can yield wide opportunities to produce high-aspect-ratio inorganic nanostructures with high surface areas. The materials developed in this work have vast potential in the fields of catalysis and electronic materials. © 2011 American Chemical Society.
Open Access
Silicon-germanium multi-quantum wells for extended functionality and lower cost integration
(IEEE, 2010) Onbasli, M.C.; Yesilyurt, Alper; Yu H.Y.; Nayfeh, A.M.; Okyay, Ali Kemal
Silicon-Germanium quantum wells were grown in p-i-n layers using a recently developed epitaxial technique. Nanostructural characterization (TEM, XPS, photoluminescence) indicates low-dislocation density, high quality films. Solar cells made of these layers have low leakage current. ©2010 IEEE.
Open Access
Theoretical and spectroscopic investigations on the structure and bonding in B-C-N thin films
(2009) Bengu, E.; Genisel, M. F.; Gulseren, O.; Ovali, R.
In this study, we have synthesized boron, carbon, and nitrogen containing films using RF sputter deposition. We investigated the effects of deposition parameters on the chemical environment of boron, carbon, and nitrogen atoms inside the films. Techniques used for this purpose were grazing incidence reflectance-Fourier-transform infrared spectroscopy (GIR-FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). GIR-FTIR experiments on the B-C-N films deposited indicated presence of multiple features in the 600 to 1700 cm- 1 range for the infrared (IR) spectra. Analysis of the IR spectra, XPS and the corresponding EELS data from the films has been done in a collective manner. The results from this study suggested even under nitrogen rich synthesis conditions carbon atoms in the B-C-N films prefer to be surrounded by other carbon atoms rather than boron and/or nitrogen. Furthermore, we have observed a similar behavior in the chemistry of B-C-N films deposited with increasing substrate bias conditions. In order to better understand these results, we have compared and evaluated the relative stability of various nearest-neighbor and structural configurations of carbon atoms in a single BN sheet using DFT calculations. These calculations also indicated that structures and configurations that increase the relative amount of C-C bonding with respect to B-C and/or C-N were energetically favorable than otherwise. As a conclusion, carbon tends to phase-segregate in to carbon clusters rather than displaying a homogeneous distribution for the films deposited in this study under the deposition conditions studied.
Unknown
Use of saccharides as solid-state precursors for the synthesis of carbon nanotubes
(Materials Research Society, 2008) Küçükkayan, Gökçe; Kayacan, Serim; Baykal, Beril; Bengu, Erman
Saccharides, ranging from simple table sugar (sucrose) to lactulose were successfully used as solid-state precursors for the synthesis of multi-walled carbon nanotubes (MWCNT). Dehydrated saccharide residues mixed with catalyst powders were subjected to pyrolysis at high temperatures (up to 1300°C) under flowing Argon atmosphere. Pyrolysis products were investigated using TEM, SEM, Raman spectroscopy and EDS. Images taken using the S/TEM and bright field mode of TEM showed the presence of helical multi-walled carbon nanotube (H-MWCNT) and regular MWCNT formation. More than two or three catalyst particles were observed to be present inside the hollow core of some of the nanotubes synthesized, suggesting a high level of capillary activity inside the tubes during synthesis. © 2008 Materials Research Society.