Browsing by Subject "Resonance wavelengths"
Now showing 1 - 5 of 5
- Results Per Page
- Sort Options
Item Open Access Plasmonically enhanced hot electron based photovoltaic device(Optical Society of American (OSA), 2013) Atar F.B.; Battal, E.; Aygun L.E.; Daglar, B.; Bayındır, Mehmet; Okyay, Ali KemalHot electron photovoltaics is emerging as a candidate for low cost and ultra thin solar cells. Plasmonic means can be utilized to significantly boost device efficiency. We separately form the tunneling metal-insulator-metal (MIM) junction for electron collection and the plasmon exciting MIM structure on top of each other, which provides high flexibility in plasmonic design and tunneling MIM design separately. We demonstrate close to one order of magnitude enhancement in the short circuit current at the resonance wavelengths. © 2013 Optical Society of America.Item Open Access Rounding corners of nano-square patches for multispectral plasmonic metamaterial absorbers(OSA - The Optical Society, 2015) Ayas S.; Bakan, G.; Dana, A.Multispectral metamaterial absorbers based on metal-insulatormetal nano-square patch resonators are studied here. For a geometry consisting of perfectly nano-square patches and vertical sidewalls, double resonances in the visible regime are observed due to simultaneous excitation of electric and magnetic plasmon modes. Although slightly modifying the sizes of the square patches makes the resonance wavelengths simply shift, rounding corners of the square patches results in emergence of a third resonance due to excitation of the circular cavity modes. Sidewall angle of the patches are also observed to affect the absorption spectra significantly. Peak absorption values for the triple resonance structures are strongly affected as the sidewall angle varies from 90 to 50 degrees. Rounded corners and slanted sidewalls are typical imperfections for lithographically fabricated metamaterial structures. The presented results suggest that imperfections caused during fabrication of the top nanostructures must be taken into account when designing metamaterial absorbers. Furthermore, it is shown that these fabrication imperfections can be exploited for improving resonance properties and bandwidths of metamaterials for various potential applications such as solar energy harvesting, thermal emitters, surface enhanced spectroscopies and photodetection. © 2015 Optical Society of America.Item Open Access Sensitivity comparison of localized plasmon resonance structures and prism coupler(2014) Kaya, Y.; Ayas S.; Topal, A. E.; Guner, H.; Dana, A.Plasmon resonances are widely used in biomolecular sensing and continue to be an active research field due to the rich variety of surface and measurement configurations, some of which exhibit down to single molecule level sensitivity. The resonance wavelength shift of the plasmonic structure upon binding of molecules, strongly depends, among other parameters, on how well the field of the resonant mode is confined to the binding site. Here it is shown that, by using properly designed metal-insulator-metal type resonators, improved wavelength response can be achieved with localized surface plasmon resonators (LSPRs) compared to that of the commonly used Kretschmann geometry. Using computational tools we investigate theoretically the refractive index response of several LSPR structures to a 2 nm thin film of binding molecules. LSPR resonators are shown to feature improved sensitivity over conventional Kretschmann geometry in the wavelength interrogation scheme for such a thin film. Moreover, some of the LSPR modes are quasi-omnidirectional and such angular independence (up to 30 angle of incidence) allows higher numerical apertures to be used in colorimetric imaging. Results highlight the potential of LSPRs for biomolecular sensing with high sensitivity and high spatial resolution.Item Open Access SILVER nano-cylinders designed by EBL used as label free LSPR nano-biosensors(SPIE, 2011) Cinel, Neval A.; Bütün, Serkan; Özbay, EkmelLocalized Surface Plasmon Resonance (LSPR) is based on the electromagnetic-field enhancement of metallic nano-particles. It is observed at the metal-dielectric interface and the resonance wavelength can be tuned by the size, shape, and periodicity of the metallic nanoparticles and the surrounding dielectric environment. This makes LSPR a powerful candidate in bio-sensing. In the present work, the size and period dependency of the LSPR wavelength was studied through simulations and fabrications. The surface functionalization, that transforms the surface into a sensing platform was done and verified. Finally, the concentration dependency of the LSPR shifts was observed. All the measurements were done by a transmission set-up. The study is at an early stage, however results are promising. The detection of specific bacteria species can be made possible with such a detection method. © 2011 SPIE.Item Open Access Thermal tuning of infrared resonant absorbers based on hybrid gold-VO2 nanostructures(American Institute of Physics Inc., 2015) Kocer H.; Butun, S.; Banar, B.; Wang, K.; Tongay, S.; Wu J.; Aydin, K.Resonant absorbers based on plasmonic materials, metamaterials, and thin films enable spectrally selective absorption filters, where absorption is maximized at the resonance wavelength. By controlling the geometrical parameters of nano/microstructures and materials' refractive indices, resonant absorbers are designed to operate at wide range of wavelengths for applications including absorption filters, thermal emitters, thermophotovoltaic devices, and sensors. However, once resonant absorbers are fabricated, it is rather challenging to control and tune the spectral absorption response. Here, we propose and demonstrate thermally tunable infrared resonant absorbers using hybrid gold-vanadium dioxide (VO2) nanostructure arrays. Absorption intensity is tuned from 90% to 20% and 96% to 32% using hybrid gold-VO2 nanowire and nanodisc arrays, respectively, by heating up the absorbers above the phase transition temperature of VO2 (68°C). Phase change materials such as VO2 deliver useful means of altering optical properties as a function of temperature. Absorbers with tunable spectral response can find applications in sensor and detector applications, in which external stimulus such as heat, electrical signal, or light results in a change in the absorption spectrum and intensity. © 2015 AIP Publishing LLC.