Browsing by Subject "Piezoelectricity"

Now showing 1 - 11 of 11

Open Access
Classifying human leg motions with uniaxial piezoelectric gyroscopes
(2009) Tunçel O.; Altun, K.; Barshan, B.
This paper provides a comparative study on the different techniques of classifying human leg motions that are performed using two low-cost uniaxial piezoelectric gyroscopes worn on the leg. A number of feature sets, extracted from the raw inertial sensor data in different ways, are used in the classification process. The classification techniques implemented and compared in this study are: Bayesian decision making (BDM), a rule-based algorithm (RBA) or decision tree, least-squares method (LSM), k-nearest neighbor algorithm (k-NN), dynamic time warping (DTW), support vector machines (SVM), and artificial neural networks (ANN). A performance comparison of these classification techniques is provided in terms of their correct differentiation rates, confusion matrices, computational cost, and training and storage requirements. Three different cross-validation techniques are employed to validate the classifiers. The results indicate that BDM, in general, results in the highest correct classification rate with relatively small computational cost. © 2009 by the authors.
Open Access
Energy relaxation probed by weak antilocalization measurements in GaN heterostructures
(2009) Cheng H.; Bıyıklı, Necmi; Xie J.; Kurdak Ç.; Morko̧ H.
Energy relaxation and electron-phonon (e-p) interaction are investigated in wurtzite Al0.15Ga0.85 N/AlN/GaN and Al0.83 In0.17 N/AlN/GaN heterostructures with polarization induced two-dimensional electron gases in the Bloch-Grüneisen regime. Weak antilocalization (WAL) and Shubnikov-de Haas measurements were performed on gated Hall bar structures at temperatures down to 0.3 K. We used WAL as a thermometer to measure the electron temperature Te as a function of the dc bias current. We found that the power dissipated per electron, P e, was proportional to Te4 due to piezoelectric acoustic phonon emission by hot electrons. We calculated Pe as a function of Te without any adjustable parameters for both the static and the dynamic screening cases of piezoelectric e-p coupling. In the temperature range of this experiment, the static screening case was expected to be applicable; however, our data was in better agreement with the dynamic screening case. © 2009 American Institute of Physics.
Open Access
High performance multimaterial fibers and devices
(2016-06) Say, Mehmet Girayhan
Fabricating low energy requiring and self-powered flexible electronic devices can decrease world energy need since energy demand seems to be one of the most fundamental problems in the near future. An excellent solution to overcome this drawback is fabricating functional and energy efficient materials. Fabricating high piezoelectric coefficient materials that are compatible with mass production, easy to produce, low cost and non-toxic is highly demanded in order to design highly sensitive sensors and self-powered devices. This thesis introduces piezoelectric polymer (PVDF-TrFE) based several sensor types, energy harvesting devices such as; prosthetic hand, cardiac sensors, electronic skin, which represent promising device architectures for flexible electronics. Semiconductor, metal, composite, piezoelectric materials or polymers can be drawn by thermal fiber drawing and by applying iterative size reduction technique, the geometry, size and length of fabricated structures can be controlled, which also enables us to design novel in fiber, fiber-array devices at nanoscale. First, to enhance PVDF-TrFE fiber performance, crystallinity of fibers was improved by introducing new designs and phase transition mechanism was investigated in fabricated films and fibers. Finally, conductive composite material for flexible interconnects and electrodes was developed. As a whole, a variety of novel piezoelectric and conductive composite fibers were fabricated by using novel size reduction technique and fiber devices were designed for flexible electronics applications.
Open Access
Independent parallel lithography using the atomic force microscope
(A I P Publishing LLC, 1996-05) Minne, S. C.; Manalis, S. R.; Atalar, Abdullah; Quate, C. F.
Independent parallel features have been lithographically patterned with a 2×1 array of individually controlled cantilevers using an atomic force microscope. Control of the individual cantilevers was achieved with an integrated piezoelectric actuator in feedback with a piezoresistive sensor. Patterns were formed on 〈100〉 single crystal silicon by using a computer controlled tip voltage to locally enhance the oxidation of the silicon. Using the piezoresistor directly as a force sensor, parallel images can be simultaneously acquired in the constant force mode. A discussion of electrostatic forces due to applied tip voltages, hysteresis characteristics of the actuator, and the cantilever system is also presented.
Open Access
An integrated acoustic and dielectrophoretic particle manipulation in a microfluidic device for particle wash and separation fabricated by mechanical machining
(American Institute of Physics Inc., 2016) Çetin B.; Özer, M. B.; Çağatay, E.; Büyükkoçak S.
In this study, acoustophoresis and dielectrophoresis are utilized in an integrated manner to combine the two different operations on a single polydimethylsiloxane (PDMS) chip in sequential manner, namely, particle wash (buffer exchange) and particle separation. In the washing step, particles are washed with buffer solution with low conductivity for dielectrophoretic based separation to avoid the adverse effects of Joule heating. Acoustic waves generated by piezoelectric material are utilized for washing, which creates standing waves along the whole width of the channel. Coupled electro-mechanical acoustic 3D multi-physics analysis showed that the position and orientation of the piezoelectric actuators are critical for successful operation. A unique mold is designed for the precise alignment of the piezoelectric materials and 3D side-wall electrodes for a highly reproducible fabrication. To achieve the throughput matching of acoustophoresis and dielectrophoresis in the integration, 3D side-wall electrodes are used. The integrated device is fabricated by PDMS molding. The mold of the integrated device is fabricated using high-precision mechanical machining. With a unique mold design, the placements of the two piezoelectric materials and the 3D sidewall electrodes are accomplished during the molding process. It is shown that the proposed device can handle the wash and dielectrophoretic separation successfully. © 2016 AIP Publishing LLC.
Open Access
Micromachined III-V cantilevers for AFM-tracking scanning Hall probe microscopy
(Institute of Physics, 2003) Brook, A. J.; Bending, S. J.; Pinto, J.; Oral, A.; Ritchie, D.; Beere, H.; Springthorpe, A.; Henini, M.
In this paper we report the development of a new III-V cantilever-based atomic force sensor with piezoresistive detection and an integrated Hall probe for scanning Hall probe microscopy. We give detailed descriptions of the fabrication process and characterization of the new integrated sensor, which will allow the investigation of magnetic samples with no sample preparation at both room and cryogenic temperatures. We also introduce a novel piezoresistive material based on the ternary alloy n+-Al0.4Ga0.6As which allows us to achieve a cantilever deflection sensitivity ΔR/(RΔz) = 2 × 10-6 Å-1 at room temperature.
Open Access
Micromechanical method for effective piezoelectric properties and electromechanical fields in multi-coated long fiber composites
(Elsevier, 2019) Chatzigeorgiou, G.; Javili, Ali; Meraghni, F.
This paper proposes a micromechanical framework for identifying the macroscopic behavior of multi-coated long fiber composites, as well as the average electromechanical microscopic fields of all phases (matrix, fibers, coating layers), generated upon known macroscopic conditions. The work aims at developing a unified micromechanical approach that provides an analytical solution standing for non-coated and multi-coated long fiber composites with transversely isotropic piezoelectric behavior. The proposed method solves specific boundary value problems and utilizes the Mori-Tanaka homogenization scheme, in which the dilute strain and electric field concentration tensors are obtained analytically with the help of an extended composite cylinders method that accounts for coupled electromechanical fields. The capabilities of this homogenization strategy are illustrated with the help of numerical examples, and comparisons with known solutions from the literature for non-coated and coated fiber piezoelectric composites are provided.
Open Access
Nanostructured materials and devices for sensing and energy harvesting applications
(2015-08) Kanık, Mehmet
A closer look into the fundamental challenges of the modern world reveals that the increasing demand for energy threatens the evolution of science and technology. Energy-efficiency is thus a fundamental issue in engineering nano-devices. An important path to achieve high efficiency is to convert the mechanical energy into electrical energy using piezoelectric and triboelectric energy harvesting circuitries, hence enabling self-powered systems at nanoscale. The utilization of novel piezoelectric and triboelectric energy harvesting materials introduces the opportunity of manufacturing flexible, wearable and stretchable self-powered devices. In this thesis, we introduced a new fabrication technique, new strategies and practical approaches for developing high performance triboelectric and piezoelectric materials and devices for flexible electronics, artificial skin and energy harvesting applications. The first part of the thesis focuses on the development of piezoelectric nanoribbons. Poly (vinylidene fluoride) and its copolymer Poly (vinylidene fluoride)-co-tri (fluoroethylene) were used to fabricate spontaneously high piezoelectric nanoribbons. We measured the record-high piezoelectric charge coefficient from our ribbons, because the high stress and high temperature used in the fabrication can enhance their properties. In addition, proof of principle devices for energy harvesting and sensing were fabricated using nanoribbons. The achievements in this part of the thesis can be listed as: i) We obtained extraordinary high aspect ratio, globally oriented, polymer encapsulated, and high piezoelectric microribbon and nanoribbon arrays. ii) Due to process conditions (shear stress and temperature) used in thermal fiber drawing, as-produced micro and nanoribbons contain high amount of polar phase without requiring any electrical poling. iii) We developed a new technique for characterizing and analyzing multiferroic characteristics of nano-objects, which consist of parallel evaluation of instrumental, numerical and analytical data. iv) To our knowledge, we achieved the highest piezoelectric charge coefficient from our ribbons in the literature. v) We enhanced stability of the piezoelectric ribbons by increasing the Curie temperature above its melting point due to processing conditions. vi) We observed and explained a new phase transformation mechanism in polymer piezoelectric ribbons. vii) The state-of-the-art ab initio calculations, which explain the phase transformation mechanism of molecules during the fiber drawing with the effect of shear, tensile forces and temperature, were included in detail. The second part is about developing high energy output triboelectric generators. A high performance multi-layered triboelectric generator was developed using chalcogenide nanostructures. This part of the thesis details the following achievements: i) We demonstrated that not only polymer, but also semiconductor chalcogenide materials can be used in triboelectric applications, for the first time. ii) For the first time, we proposed and demonstrated that the fluorination of nanostructured surfaces increases triboelectric performance significantly. iii) We introduced a multi-layered triboelectric generator which is very promising for real applications such as acoustic wave and vibration detection, and energy harvesting with very high power output (0.51 Watt) in comparison with the literature. iv) We used a 3D printing technique to produce our device, which is low-cost and appropriate for rapid prototyping and mass production. v) We explained the device theory for the triboelectric nanogenerator, which aligned well with our experimental results.
Unknown
Peculiar piezoelectric properties of soft two-dimensional materials
(American Chemical Society, 2016-06) Sevik, C.; Çakır, D.; Gülseren, O.; Peeters, F. M.
Group II-VI semiconductor honeycomb monolayers have a noncentrosymmetric crystal structure and therefore are expected to be important for nano piezoelectric device applications. This motivated us to perform first-principles calculations based on density functional theory to unveil the piezoelectric properties (i.e., piezoelectric stress (e11) and piezoelectric strain (d11) coefficients) of these monolayer materials with chemical formula MX (where M = Be, Mg, Ca, Sr, Ba, Zr, Cd and X = S, Se, Te). We found that these two-dimensional materials have peculiar piezoelectric properties with d11 coefficients 1 order of magnitude larger than those of commercially utilized bulk materials. A clear trend in their piezoelectric properties emerges, which originates mainly from their mechanical properties. We establish a simple correlation between the piezoelectric strain coefficients and the physical properties, as the natural elemental polarizabilities, the Bader charges, and lattice constants of the individual M/X atoms and MX monolayers.
Unknown
Robust antiwindup compensation for high-precision tracking of a piezoelectric nanostage
(Institute of Electrical and Electronics Engineers Inc., 2016) Liu, P.; Yan, P.; Zhang Z.; Özbay, Hitay
Ultrahigh-precision tracking in nanomanipulations poses major challenges for mechanical design as well as servo control, due to the general confliction between the precision requirement and large stroke tracking. The situation is further complicated by input saturation, which is almost inevitable for microactuators. This paper presents a novel control architecture combining a parallel internal-model-based tracking design and a robust antiwindup control structure, such that asymptotic tracking can be achieved for nanoservo systems in the presence of saturation nonlinearity and model uncertainties. For the augmented system with internal-model dynamics, an I/O-based equivalent representation from control (free of saturation) to system output is derived by incorporating the dead-zone nonlinearity, saturation compensation blocks, as well internal-model units. The robustness condition on the saturation compensator is also derived based on the sector bound criterion and an H∞-optimal design is developed accordingly. The proposed robust antiwindup tracking control architecture is deployed on a customize-designed nanostage driven by a piezoelectric (PZT) actuator, where numerical simulations and real-time experiments demonstrate excellent tracking performance and saturation compensation capability, achieving tracking precision error less than 0.23%.
Unknown
The static and dynamic screening of power loss of a two-dimensional electron gas
(Academic Press, 1998) Bennett, C.; Balkan, N.; Tanatar, Bilal; Celik, H.; Cankurtaran, M.
Experimental results concerning the well-width dependence of the acoustic-phonon-assisted energy relaxation of a two-dimensional electron gas in GaAs/Ga1-xAlxAs quantum-well structures are compared with theoretical models that involve piezoelectric and deformation-potential scattering and the effects of static and dynamic screening of the electron-acoustic phonon interaction. It is shown that screening only slightly modifies the predictions of the approximate calculations. © 1998 Academic Press.