Browsing by Author "Zhang, Z. H."
Now showing 1 - 4 of 4
- Results Per Page
- Sort Options
Item Open Access A hole accelerator for InGaN/GaN light-emitting diodes(AIP Publishing, 2014) Zhang, Z. H.; Liu, W.; Tan, S. T.; Ji, Y.; Wang, L.; Zhu, B.; Zhang, Y.; Lu, S.; Zhang, X.; Hasanov, N.; Sun, X. W.; Demir, Hilmi VolkanThe quantum efficiency of InGaN/GaN light-emitting diodes (LEDs) has been significantly limited by the insufficient hole injection, and this is caused by the inefficient p-type doping and the low hole mobility. The low hole mobility makes the holes less energetic, which hinders the hole injection into the multiple quantum wells (MQWs) especially when a p-type AlGaN electron blocking layer (EBL) is adopted. In this work, we report a hole accelerator to accelerate the holes so that the holes can obtain adequate kinetic energy, travel across the p-type EBL, and then enter the MQWs more efficiently and smoothly. In addition to the numerical study, the effectiveness of the hole accelerator is experimentally shown through achieving improved optical output power and reduced efficiency droop for the proposed InGaN/GaN LED. (C) 2014 AIP Publishing LLC.Item Open Access Improved hole distribution in InGaN/GaN light-emitting diodes with graded thickness quantum barriers(AIP Publishing, 2013) Ju, Z. G.; Liu, W.; Zhang, Z. H.; Tan, S. T.; Ji, Y.; Kyaw, Z. B.; Zhang, X. L.; Lu, S. P.; Zhang, Y. P.; Zhu, B.; Hasanov, N.; Sun, X. W.; Demir, Hilmi VolkanInGaN/GaN light-emitting diodes (LEDs) with graded-thickness quantum barriers (GTQB) are designed and grown by metal-organic chemical-vapor deposition. The proposed GTQB structure, in which the barrier thickness decreases from the n-GaN to p-GaN side, was found to lead to an improved uniformity in the hole distribution and thus, radiative recombination rates across the active region. Consequently, the efficiency droop was reduced to 28.4% at a current density of 70 A/cm2, which is much smaller than that of the conventional equal-thickness quantum barriers (ETQB) LED, which is 48.3%. Moreover, the light output power was enhanced from 770 mW for the ETQB LEDs to 870 mW for the GTQB LEDs at 70 A/cm2. © 2013 AIP Publishing LLC.Item Open Access On the effect of N-GaN/P-GaN/N-GaN/P-GaN/N-GaN built-in junctions in the n-GaN layer for InGaN/GaN light-emitting diodes(Optical Society of America, 2014-01-07) Kyaw, Z.; Zhang, Z. H.; Liu, W.; Tan, S. T.; Ju, Z. G.; Zhang, X. L.; Ji, Y.; Hasanov, N.; Zhu, B.; Lu, S.; Zhang, Y.; Sun, X. W.; Demir, Hilmi VolkanN-GaN/P-GaN/N-GaN/P-GaN/N-GaN (NPNPN-GaN) junctions embedded between the n-GaN region and multiple quantum wells (MQWs) are systematically studied both experimentally and theoretically to increase the performance of InGaN/GaN light emitting diodes (LEDs) in this work. In the proposed architecture, each thin P-GaN layer sandwiched in the NPNPN-GaN structure is completely depleted due to the built-in electric field in the NPNPN-GaN junctions, and the ionized acceptors in these P-GaN layers serve as the energy barriers for electrons from the n-GaN region, resulting in a reduced electron over flow and enhanced the current spreading horizontally in the n-GaN region. These lead to increased optical output power and external quantum efficiency (EQE) from the proposed device. (C) 2014 Optical Society of AmericaItem Open Access On the mechanisms of InGaN electron cooler in InGaN/GaN light-emitting diodes(Optical Society of America, 2014) Zhang, Z. H.; W. L.; Tan, S. T.; Ju, Z.; Ji, Y.; Kyaw, Z.; Zhang, X.; Hasanov, N.; Zhu, B.; Lu, S.; Zhang, Y.; Sun, X. W.; Demir, Hilmi VolkanElectron overflow limits the quantum efficiency of InGaN/GaN light-emitting diodes. InGaN electron cooler (EC) can be inserted before growing InGaN/GaN multiple quantum wells (MQWs) to reduce electron overflow. However, detailed mechanisms of how the InGaN EC contributes to the efficiency improvement have remained unclear so far. In this work, we theoretically propose and experimentally demonstrate an electron mean-free-path model, which reveals the InGaN EC reduces the electron mean free path in MQWs, increases the electron capture rate and also reduces the valence band barrier heights of the MQWs, in turn promoting the hole transport into MQWs. (C) 2014 Optical Society of America