Browsing by Author "Kilic, A."

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    High quantum efficiency Type-II superlattice N-structure photodetectors with thin intrinsic layers
    (SPIE, 2013) Ergun, Y.; Hostut, M.; Tansel, T.; Muti, bdullah; Kilic, A.; Turan, R.; Aydınlı, Atilla
    We report on the development of InAs/AlSb/GaSb based N-structure superlattice pin photodiode. In this new design, AlSb layer in between InAs and GaSb layers acts as an electron barrier that pushes electron and hole wave functions towards the GaSb/InAs interface to perform strong overlap under reverse bias. Experimental results show that, with only 20 periods of intrinsic layers, dark current density and dynamic resistance at -50 mV bias are measured as 6×10-3 A/cm2 and 148 ωcm2 at 77K, respectively. Under zero bias, high spectral response of 1.2A/W is obtained at 5 μm with 50% cut-off wavelengths (λc) of 6 μm. With this new design, devices with only 146 nm thick i-regions exhibit a quantum efficiency of 42% at 3 μm with front-side illimunation and no anti-reflection coatings. © 2013 SPIE.
  • Thumbnail Image
    ItemOpen Access
    N-structure based on InAs/AlSb/GaSb superlattice photodetectors
    (Academic Press, 2015) Hostut, M.; Alyoruk, M.; Tansel, T.; Kilic, A.; Turan, R.; Aydınlı, Atilla; Ergun, Y.
    We have studied the theoretical and experimental properties of InAs/AlSb/GaSb based type-II superlattice (T2SL) pin photodetector called N-structure. Electronic properties of the superlattice such as HH-LH splitting energies was investigated using first principles calculations taking into account InSb and AlAs as possible interface transition alloys between AlSb/InAs layers and individual layer thicknesses of GaSb and InAs. T2SL N-structure was optimized to operate as a MWIR detector based on these theoretical approaches tailoring the band gap and HH-LH splitting energies with InSb transition layers between InAs/AlSb interfaces. Experimental results show that AlSb layers in the structure act as carrier blocking barriers reducing the dark current. Dark current density and R0A product at 125 K were obtained as 1.8 × 10-6 A cm-2 and 800ωcm2 at zero bias, respectively. The specific detectivity was measured as 3 × 1012 Jones with cut-off wavelengths of 4.3 μm at 79 K reaching to 2 × 109 Jones and 4.5 μm at 255 K. ©2014 Elsevier Ltd. All rights reserved.
  • Thumbnail Image
    ItemOpen Access
    Theoretical investigation of InAs/GaSb type-II pin superlattice infrared detector in the mid wavelength infrared range
    (2013) Kaya, U.; Hostut, M.; Kilic, A.; Sakiroglu, S.; Sokmen I.; Ergun, Y.; Aydınlı, Atilla
    In this study, we present the theoretical investigation of type-II InAs/GaSb superlattice p-i-n detector. Kronig-Penney and envelope function approximation is used to calculate band gap energy and superlattice minibands. Variational method is also used to calculate exciton binding energies. Our results show that carriers overlap increases at GaSb/InAs interface on the higher energy side while it decreases at InAs/GaSb interface on the lower energy side with increasing reverse bias due to shifting the hole wavefunction toward to the GaSb/InAs interface decisively. Binding energies increase with increasing electric field due to overall overlap of electron and hole wave functions at the both interfaces in contrast with type I superlattices. This predicts that optical absorption is enhanced with increasing electric field. © 2013 American Institute of Physics.