Browsing by Subject "Thermal properties"

Now showing 1 - 6 of 6

Open Access
Bio-based polymer nanocomposites based on layered silicates having a reactive and renewable intercalant
(Wiley, 2013) Albayrak, O.; Şen, S.; Çaylbox, G.; Ortaç, B.
Soybean oil-based polymer nanocomposites were synthesized from acrylated epoxidized soybean oil (AESO) combined with styrene monomer and montmorillonite (MMT) clay by using in situ free radical polymerization reaction. Special attention was paid to the modification of MMT clay, which was carried out by methacryl-functionalized and quaternized derivative of methyl oleate intercalant. It was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of increased nanofiller loading in thermal and mechanical properties of the nanocomposites was investigated by thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). The nanocomposites exhibited improved thermal and dynamic mechanical properties compared with neat acrylated epoxidized soybean oil based polymer matrix. The desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt % whereas partially exfoliated nanocomposite was obtained in 3 wt % loading. It was found that about 400 and 500% increments in storage modulus at glass transition and rubbery regions, respectively were achieved at 2 wt % clay loading compared to neat polymer matrix while the lowest thermal degradation rate was gained by introducing 3 wt % clay loading. © 2013 Wiley Periodicals, Inc.
Open Access
Lyotropic liquid-crystalline mesophases of [Zn(H2O)6](NO3)2-C12EO10-CTAB-H2O and [Zn(H2O)6](NO3)2-C12EO10-SDS-H2O systems
(2008) Albayrak, C.; Soylu, A. M.; Dag, Ö.
The mixture of two surfactants (C12EO10-CTAB and C 12EO10-SDS) forms lyotropic liquid-crystalline (LLC) mesophases with [Zn(H2O)6](NO3)2 in the presence of a minimum concentration of 1.75 H2O per C 12EO10. The metal ion/C12EO10 mole ratio can be increased up to 8.0, which is a record high metal ion density in an LLC mesophase. The metal ion concentration can be increased in the medium by increasing the CTAB/C12EO10 or SDS/C12EO 10 mole ratio at the expense of the stability of the LLC mesophase. The structure and some thermal properties of the new mesophase have been investigated using XRD, POM, FTIR, and Raman techniques. © 2008 American Chemical Society.
Open Access
Polystyrene / clay nanocomposites by atom transfer radical nitroxide coupling chemistry
(Wiley, 2013) Aydin, M.; Tasdelen, M. A.; Uyar, Tamer; Jockusch, S.; Turro, N. J.; Yagci, Y.
An efficient protocol, atom transfer radical nitroxide coupling chemistry, for the preparation of polymer/clay nanocomposites via grafting-onto strategy with well-defined polymer, which were synthesized via atom transfer radical polymerization, has been described. The radical coupling, taking place between the clay layers, not only leads to attached polymer chains but also to successful nanocomposite formation with highly exfoliated morphology. Copyright © 2012 Wiley Periodicals, Inc.
Open Access
Property enhancement in unsaturated polyester nanocomposites by using a reactive intercalant for clay modification
(Wiley, 2013) Şen, S.; Gündem, H. B.; Ortaç, B.
Polymeric nanocomposites were synthesized from unsaturated polyester (UPE) matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Organophilic MMT was obtained using a quaternary salt of coco amine as intercalant having a styryl group making it a reactive intercalant. The resultant nanocomposites were characterized via X-ray diffraction and transmission electron microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated. All the nanocomposites were found to have improved thermal and mechanical properties as compared with neat UPE matrix, resulting from the contribution of nanolayer connected intercalant-to- crosslinker which allows a crosslinking reaction. It was found that the partially exfoliated nanocomposite structure with an exfoliation dominant morphology was achieved when the MMT loading was 1 wt %. This nanocomposite exhibited the highest thermal stability, the best dynamic mechanical performance and the highest crosslinking density, most probably due to more homogeneous dispersion and optimum amount of styrene monomer molecules inside and outside the MMT layers at 1 wt % loading. Copyright © 2013 Wiley Periodicals, Inc.
Open Access
Synthesis and characterization of bio-based benzoxazines derived from thymol
(John Wiley and Sons, 2019) Ertaş-Doğan, Yelda; Satılmış, Bekir; Uyar, Tamer
In the present study, bio-based benzoxazine resins were synthesized from bio-based phenolic compound; thymol, and three different amines; ethylamine, aniline and 1,6-diaminohexane, and paraformaldehyde by solvent-free condensation reaction. The chemical structures of bio-based benzoxazines; T-ea (thymol, ethylamine), T-a (thymol, aniline), and T-dh (thymol, 1,6-diaminohexane) were characterized by proton nuclear magnetic resonance spectroscopy, Fourier transform infrared (FTIR) spectroscopy, elemental analysis, and high-resolution mass spectrometry. The curing studies of T-ea, T-a, and T-dh bio-based benzoxazines were performed by stepwise thermal treatment at 150, 175, 200, 225, and 250 °C. The polymerization (ring-opening and crosslinking reactions) of T-ea, T-a, and T-dh bio-based benzoxazines was investigated by FTIR spectroscopy. Cure analysis was conducted using differential scanning calorimetry and the changes in thermal properties of the T-ea, T-a, and T-dh bio-based benzoxazine resins and their corresponding thermally crosslinked polybenzoxazines PT-ea, PT-a, and PT-dh were studied by thermogravimetric analyzer. The results indicated that all the thymol-based polybenzoxazines have shown enhanced thermal stability.
Open Access
Temperature-dependent phonon spectrum of transition metal dichalcogenides calculated from the spectral energy density: lattice thermal conductivity as an application
(American Physical Society, 2019) Mobaraki, Arash; Sevik, C.; Yapıcıoğlu, H.; Çakır, D.; Gülseren, Oğuz
Predicting the mechanical and thermal properties of quasi-two-dimensional (2D) transition metal dichalcogenides (TMDs) is an essential task necessary for their implementation in device applications. Although rigorous density-functional-theory–based calculations are able to predict mechanical and electronic properties, mostly they are limited to zero temperature. Classical molecular dynamics facilitates the investigation of temperature-dependent properties, but its performance highly depends on the potential used for defining interactions between the atoms. In this study, we calculated temperature-dependent phonon properties of single-layer TMDs, namely, MoS2, MoSe2, WS2, and WSe2, by utilizing Stillinger-Weber–type potentials with optimized sets of parameters with respect to the first-principles results. The phonon lifetimes and contribution of each phonon mode in thermal conductivities in these monolayer crystals are systematically investigated by means of the spectral-energy-density method based on molecular dynamics simulations. The obtained results from this approach are in good agreement with previously available results from the Green-Kubo method. Moreover, detailed analysis of lattice thermal conductivity, including temperature-dependent mode decomposition through the entire Brillouin zone, shed more light on the thermal properties of these 2D crystals. The LA and TA acoustic branches contribute most to the lattice thermal conductivity, while ZA mode contribution is less because of the quadratic dispersion around the Brillouin zone center, particularly in MoSe2 due to the phonon anharmonicity, evident from the redshift, especially in optical modes, by increasing temperature. For all the considered 2D crystals, the phonon lifetime values are compelled by transition metal atoms, whereas the group velocity spectrum is dictated by chalcogen atoms. Overall, the lattice thermal conductivity is linearly proportional with inverse temperature.