Browsing by Subject "Surface plasmon polaritons"

Now showing 1 - 17 of 17

Open Access
Adaptive thermal camouflage using sub-wavelength phase-change metasurfaces
(Institute of Physics Publishing Ltd., 2022-12-09) Omam, Zahra Rahimian; Ghobadi, Amir; Özbay, Ekmel; Khalichi, Bahram
Sub-wavelength metasurface designs can be used to artificially engineer the spectral thermal signature of an object. The real-time control of this emission can provide the opportunity to switch between radiative cooling (RC) and thermal camouflage functionalities. This performance could be achieved by using phase-change materials (PCMs). This paper presents a sub-wavelength dynamic metasurface design with the adaptive property. The proposed metasurface is made of vanadium dioxide (VO2) nanogratings on a silver (Ag) substrate. The design geometries are optimized in a way that both narrowband and broadband mid-infrared (MIR) emitters can be realized. At low temperatures, insulating VO2 nanogratings trigger the excitation of Fabry–Perot mode inside the grating and surface plasmon polaritons at the metal–dielectric interface with an emission peak located in the MIR region to maximize the RC performance of the design. As temperature rises, the PCM transforms into a metallic phase material and supports excitation of Wood's anomaly and localized surface plasmon resonance modes. Accordingly, the thermal signature is adaptively suppressed.
Open Access
An analysis for the broad-band absorption enhancement using plasmonic structures on uncooled infrared detector pixels
(SPIE, 2012-05) Lüleç, S. Z.; Küçük, S. E.; Battal, Enes; Okyay, Ali Kemal; Tanrıkulu, M. Y.; Akın, T.
This paper introduces an analysis on the absorption enhancement in uncooled infrared pixels using resonant plasmon modes in metal structures, and it reports, for the first time in literature, broad-band absorption enhancement using integrated plasmonic structures in microbolometers for unpolarized long-wave IR detection. Different plasmonic structures are designed and simulated on a stack of layers, namely gold, polyimide, and silicon nitride in order to enhance absorption at the long-wave infrared. The simulated structures are fabricated, and the reflectance measurements are conducted using an FTIR Ellipsometer in the 8-12 μm wavelength range. Finite difference time domain (FDTD) simulations are compared to experimental measurement results. Computational and experimental results show similar spectral reflection trends, verifying broad-band absorption enhancement in the spectral range of interest. Moreover, this paper computationally investigates pixel-wise absorption enhancement by plasmonic structures integrated with microbolometer pixels using the FDTD method. Special attention is given during the design to be able to implement the integrated plasmonic structures with the microbolometers without a need to modify the pre-determined microbolometer process flow. The optimized structure with plasmonic layer absorbs 84 % of the unpolarized radiation in the 8-12 μm spectral range on the average, which is a 22 % increase compared to a reference structure with no plasmonic design. Further improvement may be possible by designing multiply coupled resonant structures.
Open Access
Diode like high-contrast asymmetric transmission of linearly polarized waves based on plasmon-tunneling effect coupling to electromagnetic radiation modes
(Institute of Physics Publishing Ltd., 2021-06-25) Khalichi, Bahram; Ghobadi, Amir; Osgouei, Ataollah Kalantari; Özbay, Ekmel
We present a narrow-band optical diode with a high-contrast forward-to-backward ratio at the near-infrared region. The design has a forward transmission of approximately $88\% $, and a backward one of less than $3\% $, yielding a contrast ratio of greater than $14.5\,$ dB at a wavelength of $1550\,$ nm. The structure is composed of a one-dimensional diffraction grating on top of a dielectric slab waveguide, both of which are made of silicon nitride (Si3N4), and all together are placed over a silver (Ag) thin film embedded on a dielectric substrate. Utilizing a dielectric-based diffraction grating waveguide on a thin silver layer leads to the simultaneous excitation of two surface plasmon modes known as long- and short-range surface plasmon polaritons (SPPs) at both interfaces of the metallic layer. The plasmon-tunneling effect, which is the result of the coupling of SPPs excited at the upper interface of the metallic layer to the radiation modes, provides a high asymmetric transmission (AT) property. The spectral response of the proposed high-contrast AT device is verified using both rigorous coupled-wave analysis as an analytical approach and finite difference time domain as a numerical one.
Open Access
Fabrication, characterization and simulation of plasmonic cavities
(2010) Karabıyık, Mustafa
Surface plasmon polaritons (SPPs) originate from the collective oscillations of conduction electrons coupled with photons propagating at metal-dielectric interfaces. A uniform metallic gratings change the dispersion (energy-momentum relation) of a flat metal surfaces due to the interaction of SPPs with the periodic structure. By breaking the symmetry of the periodic plasmonic structure, SPP cavities can be achieved and SPPs can be localized inside the cavity regions. The aim of this thesis is to understand the physics of phase shifted grating based plasmonic cavities. To this end, we fabricated uniform gratings and phase shifted gratings using electron beam lithography, and optically characterized these SPP structures with polarization dependent reflection spectroscopy. We verified experimental results with numerical simulations SPP propagation and localization on the grating structures. Dispersion curves of SPPs have been calculated by solving Maxwell’s wave equations using finite difference time domain method (FDTD) with appropriate boundary conditions in agreement with experimentally obtained data. We studied the dispersion curve as a function of grating profile modulation where we vary the ridge height and width of the ridges. We find that the plasmonic band gap width increases as the ridge height of the ridges in the grating increases. Optimum duty cycle of grating to observe plasmonic band gap is determined to be half of the grating period. Amount of the phase shift added to the periodicity of the uniform grating defines the energy of the cavity state, which is periodically related to the phase shift. A plasmonic cavity with a quality factor 80 has been achieved. The propagation mechanism of SPPs on coupled cavities is plasmon hopping from a given cavity to the next one.
Open Access
Fourier transform plasmon resonance spectrometer using nanoslit-nanowire pair
(American Institute of Physics, 2019) Uulu, Doolos Aibek; Ashirov, Timur; Polat, N.; Yakar, O.; Balcı, S.; Kocabaş, C.
In this paper, we present a nanoscale Fourier transform spectrometer using a plasmonic interferometer consisting of a tilt subwavelength slit-nanowire pair on a metallic surface fabricated by the focused ion beam microfabrication technique. The incident broadband light strongly couples with the surface plasmons on the gold surface, and thus, surface plasmon polaritons (SPPs) are generated. The launched SPPs interfere with the incident light and generate high contrast interference fringes in the nanoslit. The transmitted SPPs through the metal nanoslit can decouple into free space and are collected by an objective in the far field. The spectroscopic information of the incidence light is obtained by fast Fourier transform of the fringe pattern of the SPPs. In our design, there is no need for a bulky dispersive spectrometer or dispersive optical elements. The dimension of the spectrometer is around 200 μm length. Our design is based on inherent coherence of the SPP waves propagating through the subwavelength metal nanoslit structures etched into an opaque gold film.
Open Access
Grating based plasmonic cavities
(2009) Şenlik, Servet Seçkin
Surface plasmon polaritons are dipole carrying electromagnetic excitations occur- ing at metal-dielectric interfaces. Metallic periodic structures exhibit modi¯ed transmission and re°ection spectra owing to the interaction of propagating SPPs with the periodicity. These periodic surfaces are used to demonstrate localiza- tion of propagating SPPs. Thin metallic ¯lms surrounded by Bragg re°ectors, selective loading of biharmonic metallic surfaces and Moire patterns are used to demonstrate plasmonic cavity formation. The quality factor, Q, a characteristic value that indicates rate of energy loss relative to the stored energy in the cavity is a crucial parameter for classifying these cavities. It was proposed that the Q factor should strongly depend on the surface geometry. However, there was not a sytematic study on the Q factor of these cavity structures. In this work, we report on a comparative study of grating based plasmonic band gap cavities. Numerically, we calculate the quality factors of the cavities based on three types of grating surfaces; uniform, biharmonic and Moirµe surfaces. Experimentally, we demonstrate the existence of plasmonic cavities based on uniform gratings. E®ective index perturbation and cavity geometries are obtained by additional dielectric loading. Furthermore, we fabricate 2D plasmonic structures, observe plasmonic band gaps in the symetry axis and propose cavity geometries for this structure.
Open Access
Hybrid plasmon-phonon polariton bands in graphene-hexagonal boron nitride metamaterials [Invited]
(Optical Society of America, 2017) Hajian, H.; Ghobadi, A.; Dereshgi, S. A.; Butun, B.; Özbay, Ekmel
We theoretically investigate mid-infrared electromagnetic wave propagation in multilayered graphene-hexagonal boron nitride (hBN) metamaterials. Hexagonal boron nitride is a natural hyperbolic material that supports highly dispersive phonon polariton modes in two Reststrahlen bands with different types of hyperbolicity. Due to the hybridization of surface plasmon polaritons of graphene and hyperbolic phonon polaritons of hBN, each isolated unit cell of the graphene-hBN metamaterial supports hybrid plasmon-phonon polaritons (HPPs). Through the investigation of band structure of the metamaterial we find that, due to the coupling between the HPPs supported by each unit cell, the graphene-hBN metamaterial can support HPP bands. The dispersion of these bands can be noticeably modified for different thicknesses of hBN layers, leading to the appearance of bands with considerably flat dispersions. Moreover, analysis of light transmission through the metamaterial reveals that this system is capable of supporting high-k propagating HPPs. This characteristic makes graphene-hBN metamaterials very promising candidates for the modification of the spontaneous emission of a quantum emitter, hyperlensing, negative refraction, and waveguiding. © 2017 Optical Society of America.
Open Access
Hybrid surface plasmon polaritons in graphene coupled anisotropic van der Waals material waveguides
(Institute of Physics Publishing Ltd., 2021-08-23) Hajian, Hodjat; Rukhlenko, I. D.; Hanson, G. W.; Özbay, Ekmel
Polaritons in anisotropic van der Waals materials (AvdWMs), with either hyperbolic or elliptical topologies, have garnered significant attention due to their ability of field confinement and many useful applications in in-plane polariton nanophotonics, including directional guiding, canalization, and hyperlensing. Here, we obtain the dispersion relation of hybrid surface plasmon polaritons (SPPs) supported by a parallel-plate waveguide composed of an AvdWM, as an example tungsten ditelluride, that is coupled with a graphene layer. Through analytical calculations and numerical simulations, we first investigate the impact of losses on the modal characteristics of SPPs supported by the AvdWM. We then show that the coupling of the anisotropic layer to a graphene sheet in a parallel-plate waveguide heterostructure allows one to control the in-plane propagation and dispersion topology of the hybrid SPPs by changing the spacer thickness and the graphene chemical potential. Moreover, it is found that owing to the different coupling regimes, this anisotropic-isotropic SPPs hybridization can enhance the propagation length and spatial localization of the guided modes. We believe this approach can lead to the realization of vdW heterostructures with improved functionalities for in-plane and out-of-plane infrared nanophotonics.
Open Access
Lasing in a Slow Plasmon Moiré Cavity
(American Chemical Society, 2015) Karademir, E.; Balci, S.; Kocabas, C.; Aydınlı, Atilla
We report on lasing from dye-based excitons coupled to slow plasmon states inside metallic Moiré cavities. Surface plasmon polaritons (SPPs) inside the cavity were slowed down to a maximum group velocity of 0.3c. Varying the modulation of the Moiré cavity, we tune the output wavelength of the plasmonic laser by varying the fast modulation period of the Moiré cavity. This work opens a new way to study SPP-matter interaction dynamics and plasmonic lasing with Bragg cavity confined slow plasmons.
Open Access
Light matter interaction in plexcitonic crystals and moiré cavities
(2015-01) Karademir, Ertuğrul
Surface plasmon polaritons (SPPs) are quanta of electromagnetic excitations at the interface between metal and dielectric media. SPPs with an evanescent tail in the perpendicular direction, thus their properties are sensitive to variations in the optical properties of the dielectrics film. If SPPs are created near excitonic media, coupling between excitons and SPs can be achieved. In this thesis, interaction dynamics of SPP-exciton coupling is investigated. In weak coupling case, properties of SPPs and excitons are perturbed as the enhancement of the optical absorption in excitonic matrices. In the strong coupling, coupled pairs (plexcitons) causes Rabi splitting in SPP dispersion curves. By patterning the metal-dielectric interface with sine profile grating, it is possible to form a band gap on the dispersion curve, width of which can be tuned by the groove depth and SPP-Exciton coupling can be engineered. Using this, a new type of crystal, plexcitonic crystal, is proposed and demonstrated that exhibit directional dependent coupling on square and triangular lattices. Superposing an additional grating on the initial one but with a slight difference in pitch, results in Moir e cavities, in which, slow plasmon modes can be confined. We show that we can directly image these modes using dark field microscopy. Further, the slow cavity mode in contact with an excitonic source, where SPPs are coupled with near field coupling, results in ampliffed light signal. Various Moire cavities are shown to exhibit plasmonic lasing when slow plasmon modes in Ag coated cavities are excited inside a suitable gain medium.
Open Access
Localization of surface plasmon polaritons in hexagonal arrays of Moiré cavities
(AIP Publishing, 2011-01) Balcı, Sinan; Kocabaş, Aşkın; Kocabaş, Coşkun; Aydınlı, Atilla
In view of the progress on the confinement of light, we report on the dispersion characteristics of surface plasmon polaritons (SPPs) on two-dimensional Moire surfaces in the visible part of the electromagnetic spectrum. Polarization dependent spectroscopic reflection measurements show omnidirectional confinement of SPPs. The resonance wavelength of SPP cavity modes can be adjusted by tuning the propagation direction of SPPs. The results may have an impact on the control of spontaneous emission and absorption with applications in light emitting diodes and solar cells, as well as in quantum electrodynamics experiments.
Open Access
Nearly perfect resonant absorption and coherent thermal emission by hBN-based photonic crystals
(Optical Society of America, 2017) Hajian, H.; Ghobadi, A.; Butun, B.; Özbay, Ekmel
In this paper, we numerically demonstrate mid-IR nearly perfect resonant absorption and coherent thermal emission for both polarizations and wide angular region using multilayer designs of unpatterned films of hexagonal boron nitride (hBN). In these optimized structures, the films of hBN are transferred onto a Ge spacer layer on top of a one-dimensional photonic crystal (1D PC) composed of alternating layers of KBr and Ge. According to the perfect agreements between our analytical and numerical results, we discover that the mentioned optical characteristic of the hBN-based 1D PCs is due to a strong coupling between localized photonic modes supported by the PC and the phononic modes of hBN films. These coupled modes are referred as Tamm phonons. Moreover, our findings prove that the resonant absorptions can be red- or blue-shifted by changing the thickness of hBN and the spacer layer. The obtained results in this paper are beneficial for designing coherent thermal sources, light absorbers, and sensors operating within 6.2 μm to 7.3 μm in a wide angular range and both polarizations. The planar and lithography free nature of this multilayer design is a prominent factor that makes it a large scale compatible design. © 2017 Optical Society of America.
Open Access
Plasmonic band gap cavities
(2008) Kocabaş, Aşkın
Surface plasmon polaritons (SPP’s) are trapped electromagnetic waves coupled to free electrons in metals that propagate at the metal-dielectric interfaces. Due to their surface confinement and potential in sub-wavelength optics, SPP’s have been extensively studied for sensing and nanophotonic applications. Dielectric structures and metallic surfaces, both periodically modulated, can form photonic band gaps. Creating a defect cavity region in the periodicity of dielectrics allows specific optical modes to localize inside a cavity region. However, despite the demonstration of numerous plasmonic surfaces and unlike its dielectric counterparts, low index modulation in metallic surfaces limits the formation of plasmonic defect cavity structures. This thesis describes new approaches for plasmonic confinement in a cavity through the use of selective loading of grating structures as well as through the use of Moiré surfaces. In our first approach, we demonstrate that a high dielectric superstructure can perturb the optical properties of propagating SPPs dramatically and enable the formation of a plasmonic band gap cavity. Formation of the cavity is confirmed by the observation of a cavity mode in the band gap both in the infrared and the visible wavelengths. In addition to the confinement of SPP’s in the vertical direction, such a cavity localizes the SPP’s in their propagation direction. Additionally, we have demonstrated that such biharmonic grating structures can be used to enhance Raman scattering and photoluminescence (PL). Using biharmonic grating structure 105 times enhancement in Raman signal and 30 times enhancement in PL were measured. Furthermore, we show that metallic Moiré surfaces can also serve as a basis for plasmonic cavities with relatively high quality factors. We have demonstrated localization and slow propagation of surface plasmons on metallic Moiré surfaces. Phase shift at the node of the Moiré surface localizes the propagating surface plasmons in a cavity and adjacent nodes form weakly coupled plasmonic cavities. We demonstrate group velocities around v = 0.44c at the center of the coupled cavity band and almost zero group velocity at the band edges can be achieved. Furthermore, sinusoidally modified amplitude about the node suppresses the radiation losses and reveals a relatively high quality factor for plasmonic cavities.
Open Access
Slow plasmons in grating cavities
(SPIE, 2016) Aydınlı, Atilla; Karademir, E.; Balcı, S.; Kocabaş, Coşkun
Recent research on surface plasmon polaritons and their applications have brought forward a wealth of information and continues to be of interest to many. In this report, we concentrate on propagating surface plasmon polaritons (SPPs) and their interaction with matter. Using grating based metallic structures, it is possible to control the electrodynamics of propagating SPPs. Biharmonic gratings loaded with periodic Si stripes allow excitation of SPPs that are localized inside the band gap with grating coupling, [1]. The cavity state is formed due to periodic effective index modulation obtained by one harmonic of the grating and loaded Si stripes. More complicated grating structures such as metallic Moiré surfaces have also been shown to form a localized state inside the band gap when excited with Kretschmann configuration, [1-6].
Open Access
Slowing surface plasmon polaritons on plasmonic coupled cavities by tuning grating grooves
(American Institute of Physics, 2010-09) Balcı, Sinan; Kocabaş, Aşkın; Kocabaş, Coşkun; Aydınlı, Atilla
We investigate slow surface plasmon polaritons (SPPs) in plasmonic waveguiding bands formed by coupled plasmonic cavities on Moiŕ surfaces. We demonstrate controlling the group velocity and dispersion of the SPPs by varying the depth of the plasmonic Bragg grating groove. Changing the grating depth results in modification of coupling coefficients between the cavities and hence the SPPs group velocity is altered. Variation in the group velocity and dispersion of SPPs can be measured with polarization dependent spectroscopic reflection measurements. Dispersion of SPPs has been calculated by finite-difference time-domain method in agreement with the experimental data.
Open Access
Tunable infrared asymmetric light transmission and absorption via graphene-hBN metamaterials
(American Institute of Physics, 2019) Hajian, Hodjat; Ghobadi, Amir; Serebryannikov, A. E.; Bütün, Bayram; Vandenbosch, G. A. E.; Özbay, Ekmel
We theoretically prove in this paper that using planar multilayer graphene-hexagonal boron nitride (hBN) metamaterials (GhMMs) can yield ultrabroadband and high-contrast asymmetric transmission (AT) and asymmetric absorption (AA) of light. The AA and AT features are obtained in the far-infrared (FIR) and mid-infrared (MIR) regions for normally incident light with transverse magnetic polarization. Here, the GhMMs are integrated with two asymmetric gratings of Ge and are composed of alternating multilayers of graphene (11 multilayers) and hBN layers (10 layers). Moreover, the total subwavelength thickness of the hybrid structures is about 3 μm, being less than half of the free-space wavelength up to nearly 50 THz. This approach—which is similar to the one introduced by Xu and Lezec [Nat. Commun. 5, 4141 (2014)] for a passive hyperbolic metamaterial operating in the visible range—is based on the excitation of high-ββ modes of the GhMM with different transmission characteristics. In addition to being ultrabroadband and high-contrast, AT and AA features of the proposed GhMMs can be actively tuned by varying the chemical potential of graphene. Furthermore, it is shown that an on-off switching of AT factor at FIR and selective tunability at MIR frequencies can be obtained via varying μμ. Due to its subwavelength and planar configuration and active operation, these multilayer graphene-hBN metamaterials with AT and AA characteristics hold promise for integration with compact optical systems operating in the MIR and FIR ranges and are suitable for applications such as optical diodes, sensors, and thermal emitters.
Open Access
Tunable surface plasmon resonance on an elastomeric substrate
(Optical Society of American (OSA), 2009-05) Olcum, Selim; Kocabaş, Aşkın; Ertaş, Gülay; Atalar, Abdullah; Aydınlı, Atilla
In this study, we demonstrate that periods of metallic gratings on elastomeric substrates can be tuned with external strain and hence are found to control the resonance condition of surface plasmon polaritons. We have excited the plasmon resonance on the elastomeric grating coated with gold and silver. The grating period is increased up to 25% by applying an external mechanical strain. The tunability of the elastomeric substrate provides the opportunity to use such gratings as efficient surface enhanced Raman spectroscopy substrates. It's been demonstrated that the Raman signal can be maximized by applying an external mechanical strain to the elastomeric grating. © 2009 Optical Society of America.