Browsing by Subject "Self phase modulation"

Now showing 1 - 5 of 5

Open Access
Balancing gain narrowing with self phase modulation: 100-fs, 800-nJ from an all-fiber-integrated Yb amplifier
(IEEE, 2013) Pavlov, Ihor; Rybak, A.; Cenel, C.; İlday, F. Ömer
There is much progress in Yb-fiber oscillator-amplifier systems, which enable generation of high-repetition-rate, microjoule energies and sub-picosecond pulse widths [1,2]. Given the extremely large total gain factors to reach microjoules starting from nanojoules, which is often in the range of 40-60 dB, due to losses, and the impact of mismatched high-order dispersion as temporal stretching and compression of pulses by large factors (30-40 dB) need to be employed. As a result of these challenges, most of the Yb-fiber amplifiers have resulted in pulse durations of several 100 fs or longer. While pulse durations in this range are suited for some applications, there are many cases where 100-fs or shorter pulses in microjoule range are required. Gain narrowing can be effectively countered by self-phase modulation (SPM) [3] by limiting amplification factor in each stage of amplification and through careful optimization of SPM and inversion level along the gain fiber. The conceptual template is readily present in the evolution of the pulse inside the oscillator cavity, where gain factors are often in the 10-50 range per roundtrip. To the extend that the B-integral and the gain distribution along the amplifier can be kept identical to the oscillator by proper scaling of the chirped pulse width and fiber mode area, the original oscillator can be preserved in arbitrary number of amplification stages. Here, we demonstrate a highly fiber-integrated master-oscillator power-amplifier (MOPA) system, from which - 1 μJ pulses are extracted and externally compressed to 100 fs by arranging amplification in each stage as close as possible to the intra-cavity evolution. To our knowledge, these results are the shortest demonstrated from all-fiber-integrated amplifier at the microjoule level. © 2013 IEEE.
Open Access
Generation of 1.2-nJ, 62-fs, chirp-free pulses directly from a Yb-doped fiber oscillator
(IEEE, 2016) Teamir, Tesfay G.; İlday, Fatih Ömer
1.2-nJ, 62-fs, linear-chirp-free pulses are generated directly from a mode-locked fiber oscillator through optimized interaction of second- and third-order dispersion with self-phase modulation.
Open Access
Kilometer-long ordered nanophotonic devices by preform-to-fiber fabrication
(Institute of Electrical and Electronics Engineers, 2006) Bayındır, Mehmet; Abouraddy, A.F.; Shapira O.; Viens J.; Saygin-Hinczewski, D.; Sorin, F.; Arnold, J.; Joannopoulos, J. D.; Fink, Y.
A preform-to-flber approach to the fabrication of functional fiber-based devices by thermal drawing in the viscous state is presented. A macroscopic preform rod containing metallic, semiconducting, and insulating constituents in a variety of geometries and close contact produces kilometer-long novel nanostructured fibers and fiber devices. We first review the material selection criteria and then describe metal-semiconductor-metal photosensitive and thermally sensitive fibers. These flexible, lightweight, and low-cost functional fibers may pave the way for new types of fiber sensors, such as thermal sensing fabrics, artificial skin, and large-area optoelectronic screens. Next, the preform-to-fiber approach is used to fabricate spectrally tunable photodetectors that integrate a photosensitive core and a nanostructured photonic crystal structure containing a resonant cavity. An integrated, self-monitoring optical-transmission waveguide is then described that incorporates optical transport and thermal monitoring. This fiber allows one to predict power-transmission failure, which is of paramount importance if high-power optical transmission fines are to be operated safely and reliably in medical, industrial and defense applications. A hybrid electron-photon fiber consisting of a hollow core (for optical transport by means of a photonic bandgap) and metallic wires (for electron transport) is described that may be used for transporting atoms and molecules by radiation pressure. Finally, a solid microstructured fiber fabricated with a highly nonlinear chalcogenide glass enables the generation of supercontinuum light at near-infrared wavelengths.
Open Access
A scratch-pad memory aware dynamic loop scheduling algorithm
(IEEE, 2008-03) Öztürk, Özcan; Kandemir, M.; Narayanan, S. H. K.
Executing array based applications on a chip multiprocessor requires effective loop parallelization techniques. One of the critical issues that need to be tackled by an optimizing compiler in this context is loop scheduling, which distributes the iterations of a loop to be executed in parallel across the available processors. Most of the existing work in this area targets cache based execution platforms. In comparison, this paper proposes the first dynamic loop scheduler, to our knowledge, that targets scratch-pad memory (SPM) based chip multiprocessors, and presents an experimental evaluation of it. The main idea behind our approach is to identify the set of loop iterations that access the SPM and those that do not. This information is exploited at runtime to balance the loads of the processors involved in executing the loop nest at hand. Therefore, the proposed dynamic scheduler takes advantage of the SPM in performing the loop iteration-to-processor mapping. Our experimental evaluation with eight array/loop intensive applications reveals that the proposed scheduler is very effective in practice and brings between 13.7% and 41.7% performance savings over a static loop scheduling scheme, which is also tested in our experiments. © 2008 IEEE.
Open Access
SPM management using markov chain based data access prediction
(IEEE, 2008-11) Yemliha, T.; Srikantaiah, S.; Kandemir, M.; Öztürk, Özcan
Leveraging the power of scratchpad memories (SPMs) available in most embedded systems today is crucial to extract maximum performance from application programs. While regular accesses like scalar values and array expressions with affine subscript functions have been tractable for compiler analysis (to be prefetched into SPM), irregular accesses like pointer accesses and indexed array accesses have not been easily amenable for compiler analysis. This paper presents an SPM management technique using Markov chain based data access prediction for such irregular accesses. Our approach takes advantage of inherent, but hidden reuse in data accesses made by irregular references. We have implemented our proposed approach using an optimizing compiler. In this paper, we also present a thorough comparison of our different dynamic prediction schemes with other SPM management schemes. SPM management using our approaches produces 12.7% to 28.5% improvements in performance across a range of applications with both regular and irregular access patterns, with an average improvement of 20.8%.