Browsing by Subject "Photoconducting materials"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    High-performance solar-blind AlGaN photodetectors
    (SPIE, 2005) Özbay, Ekmel; Tut, Turgut; Bıyıklı, N.
    Design, fabrication, and characterization of high-performance Al xGa1-xN-based photodetectors for solar-blind applications are reported. AlxGa1-xN heterostructures were designed for Schottky, p-i-n, and metal-semiconductor-metal (MSM) photodiodes. The solar-blind photodiode samples were fabricated using a microwave compatible fabrication process. The resulting devices exhibited extremely low dark currents. Below 3 fA leakage currents at 6 V and 12 V reverse bias were measured on p-i-n and Schottky photodiode samples respectively. The excellent current-voltage (I-V) characteristics led to a detectivity performance of 4.9×1014 cmHz1/2W-1. The MSM devices exhibited photoconductive gain, while Schottky and p-i-n samples displayed 0.15 A/W and 0.11 A/W peak responsivity values at 267 nm and 261 nm respectively. All samples displayed true solar-blind response with cut-off wavelengths smaller than 280 nm. A visible rejection of 4×104 was achieved with Schottky detector samples. High speed measurements at 267 nm resulted in fast pulse responses with >GHz bandwidths. The fastest devices were MSM photodiodes with a maximum 3-dB bandwidth of 5.4 GHz.
  • Thumbnail Image
    ItemOpen Access
    Investigation of AlGaN buffer layers on sapphire grown by MOVPE
    (SPIE, 2004) Van Gemmern, P.; Dikme, Y.; Bıyıklı, Necmi; Kalisch, H.; Özbay, Ekmel; Jansen, R. H.; Heuken, M.
    In this work, AlGaN layers were grown on sapphire by metal-organic vapor phase epitaxy (MOVPE) on (0001)-oriented sapphire substrates, with the intention to investigate the effect of varying Al/MO and V/III ratios on the Al incorporation into the AlGaN layers. The parameters Al/MO and V/III describe the proportions of source material inside the reactor. With the help of optical transmission measurements, characteristic cut-off wavelengths of the Al xGa(1-x)N layers were determined. These wavelengths were used to calculate the Al content x of the layers, leading to values between 26.6% and 52.1%. Using the two process parameters Al/MO and V/III as input and the Al content of the AlGaN layers as a response variable, the experimental results were further investigated with the help of the software STATGRAPHICS. An estimated response surface for the variable x was generated. It was found that the Al incorporation is only tunable within a wide range for high V/III ratios of about 900. For constant Al/MO ratios and varying V/III ratios, two different growth characteristics were observed at high and low Al/MO values. This behavior is ascribed to the superposition of two oppositional effects.