Browsing by Subject "Microwave circuits."

Now showing 1 - 4 of 4

Open Access
Experimental demonstration of transmission enhancement through subwavelength apertures at microwave frequencies
(2012) Ateş, Damla
Metamaterials are artificial materials with novel electromagnetic characteristics. They are used in many applications including imaging, super lenses, cloaking, transmission enhancement, beaming and recently in nano applications. One of the major building blocks is the split ring resonators (SRR). We can construct metamaterials by using a single or an array of the SRRs. In this thesis, enhanced transmission through subwavelength apertures, which is one of the applications of metamaterials, is obtained by using various split ring resonators configurations. We demonstrated transmission enhancement with Connected Split Ring Resonators (CSRRs), Omega-like Split Ring Resonators and Stack-like Split Ring Resonators through circular and rectangular subwavelength apertures experimentally and numerically at the microwave frequencies. We report the highest experimental transmission enhancement results in the literature so far. Besides high factors, we also obtained multi-peak resonant characteristics with Stack-like SRR designs. Furthermore, we analyzed these various SRR samples numerically in order to understand the resonance behavior. We also discuss the effects of shorting the loops, omitting the components of the SRRs and aperture geometry to the resonance frequency. Finally, we applied Tight Binding methods to analyze the multi-peak characteristics of the Stack-like SRR design.
Open Access
Fast algorithms for linear and nonlinear microwave circuit simulation
(1994) Çelik, Mustafa
A new method is proposed for dominant pole-zero (or pole-residue) analysis of large linear microwave circuits containing both lumped and distributed elements. This method is based on a multipoint Fade approximation. It finds a reduced order rational s-domain transfer function using a data set obtained by solving the circuit at only a few frequency points. We propose two techniques in order to obtain the coefficients of the transfer function from the data set. The proposed method provides a more efficient computation of both transient and frequency domain responses than conv'entional simulators and more accurate results than the techniques based on single-point Fade approximation such as Asymptotic Waveform Evaluation. This study also describes a new method for the transient analysis of large circuits containing weakly nonlinear elements, linear lumped components, and the linear elements specified with frequency domain parameters such as lossy multiconductor transmission lines. The method combines the Volterra-series technique with Asymptotic Waveform Evaluation approach and corresponds to recursive analysis of a linear equivalent circuit. We have also proposed a new method to find steady state responses of nonlinear microwave circuits. It is a modified and more efficient form of Newton-Raphson iteration based harmonic balance (HB) technique. It solves the convergence problems of the HB technique at high drive levels. The proposed method makes use of the parametric dependence of the circuit responses on the excitation level. It first computes the derivatives of the complex amplitudes of the harmonics with respect to the excitation level efficiently and then finds the Fade approximants for the amplitudes of the harmonics using these derivatives.
Open Access
MMIC VCO design
(1995) Erdem, Aykut
In this study, three voltage controlled oscillator (VCO) circuits are realised using Monolithic Microwave Integrated Circuit (MMIC) technology. Two of the VCOs are in the capacitive feedback topology, whereas the last one is designed by using the inductive feedback topology. GaAs MESFETs are used as both active devices and varactor diodes. Designed for a 50il system, the circuits operate in 8.88-10.40GHz, 8.7T10.23GHz and 8.96-12.14GHz ranges. Their output powers are well above the 9.5dBm for most of the oscillation band. All three VCOs have harmonic suppressions better than 30dBc. Both small signal and large signal analysis are carried out. The layouts are designed by GEC Marconi’s F20 process rules and the circuits are produced in this foundry
Open Access
Novel wireless RF-bioMEMS implant sensors of metamaterials
(2010) Melik, Rohat
Today approximately one out of ten patients with a major bone fracture does not heal properly because of the inability to monitor fracture healing. Standard radiography is not capable of discriminating whether bone healing is occurring normally or aberrantly. To solve this problem, we proposed and developed a new enabling technology of implantable wireless sensors that monitor mechanical strain on implanted hardware telemetrically in real time outside the body. This is intended to provide clinicians with a powerful capability to asses fracture healing following the surgical treatment. Here we present the proof-of-concept in vitro and ex vivo demonstrations of bio-compatible radio-frequency (RF) micro-electro-mechanical system (MEMS) strain sensors for wireless strain sensing to monitor healing process. The operating frequency of these sensors shifts under mechanical loading; this shift is related to the surface strain of the implantable test material. In this thesis, for the first time, we developed and demonstrated a new class of bio-implant metamaterial-based wireless strain sensors that make use of their unique structural advantages in sensing, opening up important directions for the applications of metamaterials. These custom-design metamaterials exhibit better performance in remote sensing than traditional RF structures (e.g., spiral coils). Despite their small size, these meta-sensors feature a low enough operating frequency to avoid otherwise strong background absorption of soft tissue and yet yield higher Q-factors (because of their splits with high electric field density) compared to the spiral structures. We also designed and fabricated flexible metamaterial sensors to exhibit a high level of linearity, which can also conveniently be used on non-flat surfaces. Innovating on the idea of integrating metamaterials, we proposed and implemented a novel architecture of ‘nested metamaterials’ that incorporate multiple split ring resonators integrated into a compact nested structure to measure strain telemetrically over a thick body of soft tissue. We experimentally verified that this nested metamaterial architecture outperforms classical metamaterial structures in telemetric strain sensing. As a scientific breakthrough, by employing our nested metamaterial design, we succeeded in reducing the electrical length of the sensor chip down to λo/400 and achieved telemetric operation across thick soft tissue with a tissue thickness up to 20 cm, while using only sub-cm implantable chip size (compatible with typical orthopaedic trauma implants and instruments). As a result, with nested metamaterials, we successfully demonstrated wireless strain sensing on sheep’s fractured metatarsal and femur using our sensors integrated on stainless steel fixation plates and on sheep’s spine using directly attached sensors in animal models. This depth of wireless sensing has proved to suffice for a vast portfolio of bone fracture (including spine) and trauma care applications in body, as also supported by ongoing in vivo experiments in live animal models in collaboration with biomechanical and medical doctors. Herein, for all generations of our RF-bioMEMS implant sensors, this dissertation presents a thorough documentation of the device conception, design, modeling, fabrication, device characterization, and system testing and analyses. This thesis work paves the way for “smart” orthopaedic trauma implants, and enables further possible innovations for future healthcare.