Browsing by Subject "Microfluidic channel"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    CO2 laser polishing of microfluidic channels fabricated by femtosecond laser assisted carving
    (Institute of Physics Publishing, 2016-10) Serhatlioglu, M.; Ortaç, B.; Elbuken, C.; Bıyıklı, Necmi; Solmaz, M. E.
    In this study, we investigate the effects of CO2 laser polishing on microscopic structures fabricated by femtosecond laser assisted carving (FLAC). FLAC is the peripheral laser irradiation of 2.5D structures suitable for low repetition rate lasers and is first used to define the microwell structures in fused silica followed by chemical etching. Subsequently, the bottom surface of patterned microwells is irradiated with a pulsed CO2 laser. The surfaces were characterized using an atomic force microscope (AFM) and scanning electron microscope (SEM) in terms of roughness and high quality optical imaging before and after the CO2 laser treatment. The AFM measurements show that the surface roughness improves more than threefold after CO2 laser polishing, which promises good channel quality for applications that require optical imaging. In order to demonstrate the ability of this method to produce low surface roughness systems, we have fabricated a microfluidic channel. The channel is filled with polystyrene bead-laden fluid and imaged with transmission mode microscopy. The high quality optical images prove CO2 laser processing as a practical method to reduce the surface roughness of microfluidic channels fabricated by femtosecond laser irradiation. We further compared the traditional and laser-based glass micromachining approaches, which includes FLAC followed by the CO2 polishing technique.
  • Thumbnail Image
    ItemOpen Access
    Fabrication and characterization of liquid metal-based micro-electromechanical DC-contact switch for RF applications
    (CRC Press, 2012) Çağatay, Engin; Noyan, Mehmet Alican; Damgaci, Y.; Cetiner, B. A.; Bıyıklı, Necmi
    We demonstrate that room-temperature liquid metal alloy droplets of Eutectic Gallium Indium (EGaIn) and Gallium Indium Tin alloy (Galinstan) can be actuated using electro-wetting-on-dielectric (EWOD) effect. With the application of 80-100V across the actuation electrode and ground electrode, the metallic liquid droplets were observed to be actuated. We have studied the actuation characteristics using different electrode architectures in open-air configuration as well as in encapsulated microfluidic channel test-beds. The resulting microfluidic DC actuation might potentially be used for RF switching applications.