Browsing by Subject "Lumped element model"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Open Access Design, fabrication and operation of a very high intensity CMUT transmit array for beam steering applications(2020-12) Khan, Talha MasoodSeveral studies have reported airborne ultrasound transmission systems focused on achieving beamforming. However, beam steering and beamforming for capacitive micromachined ultrasonic transducers (CMUTs) at high intensity remains to be accomplished. CMUTs, like other ultrasonic transducers, incorporate a loss mechanism to obtain a wide bandwidth. They are restricted to a limited amount of plate swing due to the gap between the radiating plate and the bottom electrode, along with a high dc bias operation. CMUTs can be designed to produce high-intensity ultrasound by employing an unbiased operation. This mode of operation allows the plate to swing the entire gap without collapsing, thus enabling higher intensity. In this study, we use an equivalent circuit-based model to design unbiased CMUT arrays driven at half the mechanical frequency. This model is cross verified using finite element analysis (FEA). CMUT arrays are produced in multiple configurations using a customized microfabrication process that involves anodic wafer bonding, a single lithographic mask, and a shadow mask. We use impedance measurements to characterize the microfabricated devices. We experimentally obtained the highest reported intensity using a microfabricated 2×2 CMUT array driven at resonance in a pulsed configuration. This array is also capable of beam steering and beamforming at a high intensity such that it can steer the entire half-space. The beam obtained from the array is in excellent agreement with the theoretical predictions. The amplitude and phase compensation for the devices remain constant that makes these arrays attractive for applications involving park assist, gesture recognition, and tactile displays.Item Open Access Lumped element modeling of CMUT arrays in collapsed mode(IEEE, 2014-09) Aydoğdu, Elif; Özgürlük, A.; Atalar, Abdullah; Köymen, HayrettinThis study focuses on modeling collapsed modeoperation of CMUT arrays, and obtaining a small signal lumped element model for collapsed mode operation. Having the large signal model for single CMUT from previous studies, the mutual radiation impedance is presented for the collapsed mode, and a large signal model for a CMUT array is obtained for simulating the operation in both uncollapsed and collapsed modes. For faster computation, a small signal model for a CMUT cell is derived by linearizing the collapsed mode operation at a given bias point, and the computation time is reduced significantly. Using this model we are able to simulate a large array of collapsed CMUT cells. © 2014 IEEE.Item Open Access Parametric nonlinear lumped element model for circular CMUTs in collapsed mode(2014) Aydoǧdu, E.; Ozgurluk, A.; Atalar, Abdullah; Köymen, HayrettinWe present a parametric equivalent circuit model for a circular CMUT in collapsed mode. First, we calculate the collapsed membrane deflection, utilizing the exact electrical force distribution in the analytical formulation of membrane deflection. Then we develop a lumped element model of collapsed membrane operation. The radiation impedance for collapsed mode is also included in the model. The model is merged with the uncollapsed mode model to obtain a simulation tool that handles all CMUT behavior, in transmit or receive. Large- and small-signal operation of a single CMUT can be fully simulated for any excitation regime. The results are in good agreement with FEM simulations. © 2014 IEEE.