Browsing by Subject "Indium-tin-oxide"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    45-GHz bandwidth-efficiency resonant-cavity-enhanced ITO-Schottky photodiodes
    (IEEE, 2001) Bıyıklı, Necmi; Kimukin, I.; Aytür, O.; Gökkavas, M.; Ünlü, M. S.; Özbay, Ekmel
    High-speed Schottky photodiodes suffer from low efficiency mainly due to the thin absorption layers and the semitransparent Schottky-contact metals. We have designed, fabricated and characterized high-speed and high-efficiency AlGaAs-GaAs-based Schottky photodiodes using transparent indium-tin-oxide Schottky contact material and resonant cavity enhanced detector structure. The measured devices displayed resonance peaks around 820 nm with 75% maximum peak efficiency and an experimental setup limited temporal response of 11 ps pulsewidth. The resulting 45-GHz bandwidth-efficiency product obtained from these devices corresponds to the best performance reported to date for vertically illuminated Schottky photodiodes.
  • Thumbnail Image
    ItemOpen Access
    High-speed visible-blind GaN-based ITO-Schottky photodiodes
    (SPIE, 2002) Bıyıklı, Necmi; Kimukin, İbrahim; Kartaloğlu, Tolga; Aytür, Orhan; Özbay, Ekmel
    In this paper we present our efforts on the design, fabrication and characterization of high-speed, visible-blind, GaN-based ultra-violet (UV) photodiodes using indium-tin-oxide (ITO) Schottky contacts. ITO is known as a transparent conducting material for the visible and near infrared part of the electromagnetic spectrum. We have investigated the optical properties of thin ITO films in the ultraviolet spectrum The transmission and reflection measurements showed that thin ITO films had better transparencies than thin Au films for wavelengths greater than 280 mn. Using a microwave compatible fabrication process, we have fabricated Au and ITO based Schottky photediodes on n-/n+ GaN epitaxial layers. We have made current-voltage (I-V), spectral quantum efficiency, and high-speed characterization of the fabricated devices. I-V characterization showed us that the Au-Schottky samples had better electrical characteristics mainly due to the larger Schottky barrier. However, due to the better optical transparency, ITO-Schottky devices exhibited higher quantum efficiencies compared to Au-Schottky devices. ITO-Schottky photodiodes with ∼80 nm thick ITO films resulted in a maximum quantum efficiency of 47%, whereas Au-Schottky photodiode samples with ∼10 nm thick Au films displayed a maximum efficiency of 27% in the visible-blind spectrum. UV/visible rejection ratios over three orders of magnitude were obtained for both samples. High-frequency characterization of the devices was performed via pulse-response measurements at 360 nm. ITO-Schottky photodiodes showed excellent high-speed characteristics with rise times as small as 12 psec and RC-time constant limited pulse-widths of 60 psec.