Browsing by Subject "I-V measurements"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    On the interface states and series resistance profiles of (Ni/Au)-Al 0.22Ga0.78N/AlN/GaN heterostructures before and after 60Co (γ-ray) irradiation
    (Taylor and Francis, 2010-06-09) Demirezen, S.; Altndal, S.; Özçelik, S.; Özbay, Ekmel
    The values of interface states (NSS) and series resistance (RS) of (Ni/Au)-Al0.22Ga0.78N/AlN/GaN heterostructures were obtained from admittance and current-voltage measurements before and after 250kGy 60Co irradiation. The analyses of these data indicate that the values of capacitance and conductance decrease, as the R S increases with increasing dose rate due to the generation of N SS. The increase in RS with increasing dose rate was attributed to two main models. According to the first model, it has been attributed to a direct decrease in the donor concentration in semiconductor material as a result of the elimination of shallow donor states. According to the second model, it is a result of irradiation because of the formation of deep acceptor centers in the semiconductor bulk, and electrons from the shallow donor centers are captured by these acceptors.
  • Thumbnail Image
    ItemOpen Access
    Ta/Si Schottky diodes fabricated by magnetron sputtering technique
    (2010) Ocak, Y.S.; Genisel, M.F.; Kiliçoǧlu, T.
    Electrical properties of Ta/n-Si and Ta/p-Si Schottky barrier diodes obtained by sputtering of tantalum (Ta) metal on semiconductors have been investigated. The characteristic parameters of these contacts like barrier height, ideality factor and series resistance have been calculated using current voltage (I-V) measurements. It has seen that the diodes have ideality factors more than unity and the sum of their barrier heights is 1.21 eV which is higher than the band gap of the silicon (1.12 eV). The results have been attributed the effects of inhomogeneities at the interface of the devices and native oxide layer. In addition, the barrier height values determined using capacitance-voltage (C-V) measurements have been compared the ones obtained from I-V measurements. It has seen that the interface states have strong effects on electrical properties of the diodes such as C-V and Rs-V measurements. © 2010 Elsevier Ltd. All rights reserved.