Browsing by Subject "Frequency selective surfaces"

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    FSS-based approach for the power transmission enhancement through electrically small apertures
    (Springer, 2011-01-20) Scorrano, L.; Bilotti, F.; Özbay, Ekmel; Vegni, L.
    In this paper, a novel approach, based on the employment of frequency selective surfaces, to enhance the power transmission through sub-wavelength apertures at the microwave frequencies is presented. A heuristic interpretation of the phenomenon is given, as well as an analytical model, based on the transmission line network representation. Finally, the performance of the proposed structure is validated through a set of full-wave numerical simulations.
  • Thumbnail Image
    ItemOpen Access
    Miniaturization and characterization of metamaterial resonant particles
    (IEEE, 2008-10) Aznar, F.; Bonache, J.; Martín, F.; Özbay, Ekmel; Alıcı, K. Boratay; Bilotti, F.; Tricarico, S.; Vegni, L.; Baena, J. D.; Jelinek, L.; Marqués, R.
    This paper is focussed on the miniaturization and characterization of semi-lumped resonators, of interest for the synthesis of metamaterial-based structures such as metamaterial transmission lines, frequency selective surfaces, absorbers, and radiating elements, among others. The particles consist on metallic patterns etched on a dielectric and are inspired on the split ring resonator, SRR (that is, the formerly resonant particle used for the synthesis of left handed metamaterials). The different strategies for miniaturization are discussed and examples are given. It is shown that by using two metallic levels connected through vias it is possible to achieve very small electrical size for the particles (namely, below λ/100, where λ is the wavelength in the considered substrate at resonance). A method to determine the electrical parameters of the resonators in metamaterial transmission line configurations is also presented, and the possibility to determine the characteristics of the isolated particles is discussed. Finally, examples of application of this technique are presented. This work is of interest for the synthesis of effective media metamaterials based on resonant elements. © 2008 EuMA.
  • Thumbnail Image
    ItemOpen Access
    Terahertz Bandpass Frequency Selective Surfaces on Glass Substrates Using a Wet Micromachining Process
    (Springer New York LLC, 2017) Ramzan, Mehrab; Khan, Talha Masood; Bolat, Sami; Nebioglu, Mehmet Ali; Altan, Hakan; Okyay, Ali Kemal; Topallı, Kağan
    This paper presents terahertz (THz) frequency selective surfaces (FSS) implemented on glass substrate using standard microfabrication techniques. These FSS structures are designed for frequencies around 0.8 THz. A fabrication process is proposed where a 100-μm-thick glass substrate is formed through the HF etching of a standard 500-μm-thick low cost glass wafer. Using this fabrication process, three separate robust designs consisting of single-layer FSS are investigated using high-frequency structural simulator (HFSS). Based on the simulation results, the first design consists of a circular ring slot in a square metallic structure on top of a 100-μm-thick Pyrex glass substrate with 70% transmission bandwidth of approximately 0.07 THz, which remains nearly constant till 30° angle of incidence. The second design consists of a tripole structure on top of a 100-μm-thick Pyrex glass substrate with 65% transmission bandwidth of 0.035 THz, which remains nearly constant till 30° angle of incidence. The third structure consists of a triangular ring slot in a square metal on top of a 100-μm-thick Pyrex glass substrate with 70% transmission bandwidth of 0.051 THz, which remains nearly constant up to 20° angle of incidence. These designs show that the reflections from samples can be reduced compared to the conventional sample holders used in THz spectroscopy applications, by using single layer FSS structures manufactured through a relatively simple fabrication process. Practically, these structures are achieved on a fabricated 285-μm-thick glass substrate. Taking into account the losses and discrepancies in the substrate thickness, the measured results are in good agreement with the electromagnetic simulations. © 2017, Springer Science+Business Media New York.