Browsing by Subject "External quantum efficiency"

Now showing 1 - 16 of 16

Open Access
A charge inverter for III-nitride light-emitting diodes
(American Institute of Physics Inc., 2016) Zhang Z.-H.; Zhang, Y.; Bi, W.; Geng, C.; Xu S.; Demir, Hilmi Volkan; Sun, X. W.
In this work, we propose a charge inverter that substantially increases the hole injection efficiency for InGaN/GaN light-emitting diodes (LEDs). The charge inverter consists of a metal/electrode, an insulator, and a semiconductor, making an Electrode-Insulator-Semiconductor (EIS) structure, which is formed by depositing an extremely thin SiO2 insulator layer on the p+-GaN surface of a LED structure before growing the p-electrode. When the LED is forward-biased, a weak inversion layer can be obtained at the interface between the p+-GaN and SiO2 insulator. The weak inversion region can shorten the carrier tunnel distance. Meanwhile, the smaller dielectric constant of the thin SiO2 layer increases the local electric field within the tunnel region, and this is effective in promoting the hole transport from the p-electrode into the p+-GaN layer. Due to the improved hole injection, the external quantum efficiency is increased by 20% at 20 mA for the 350 × 350 μm2 LED chip. Thus, the proposed EIS holds great promise for high efficiency LEDs.
Open Access
Comparative study of thin film n-i-p a-Si: H solar cells to investigate the effect of absorber layer thickness on the plasmonic enhancement using gold nanoparticles
(Elsevier Ltd, 2015) Islam, K.; Chowdhury F.I.; Okyay, Ali Kemal; Nayfeh, A.
In this paper, the effect of gold nanoparticles on n-i-p a-Si:H solar cells with different intrinsic layer (i-layer) thicknesses has been studied. 100nm and 500nm i-layer based n-i-p a-Si:H solar cells were fabricated and colloidal gold (Au) nanoparticles dispersed in water-based solution were spin-coated on the top surface of the solar cells. The Au nanoparticles are of spherical shape and have 100nm diameter. Electrical and quantum efficiency measurements were carried out and the results show an increase in short-circuit current density (Jsc), efficiency and external quantum efficiency (EQE) with the incorporation of the nanoparticles on both cells. Jsc increases from 5.91mA/cm2 to 6.5mA/cm2 (~10% relative increase) and efficiency increases from 3.38% to 3.97% (~17.5% relative increase) for the 100nm i-layer solar cell after plasmonic enhancement whereas Jsc increases from 9.34mA/cm2 to 10.1mA/cm2 (~7.5% relative increase) and efficiency increases from 4.27% to 4.99% (~16.9% relative increase) for the 500nm i-layer cell. The results show that plasmonic enhancement is more effective in 100nm than 500nm i-layer thickness for a-Si:H solar cells. Moreover, the results are discussed in terms of light absorption and electron hole pair generation. © 2015 Elsevier Ltd.
Open Access
An efficient non-Lambertian organic light-emitting diode using imprinted submicron-size zinc oxide pillar arrays
(AIP, 2013) Liu, S. W.; Wang, J. X.; Divayana, Y.; Dev, K.; Tan S.T.; Demir, Hilmi Volkan; Sun, X. W.
We report phosphorescent organic light-emitting diodes with a substantially improved light outcoupling efficiency and a wider angular distribution through applying a layer of zinc oxide periodic nanopillar arrays by pattern replication in non-wetting templates technique. The devices exhibited the peak emission intensity at an emission angle of 40° compared to 0° for reference device using bare ITO-glass. The best device showed a peak luminance efficiency of 95.5 ± 1.5 cd/A at 0° emission (external quantum efficiency - EQE of 38.5 ± 0.1%, power efficiency of 127 ± 1 lm/W), compared to that of the reference device, which has a peak luminance efficiency of 68.0 ± 1.4 cd/A (EQE of 22.0 ± 0.1%, power efficiency of 72 ± 1 lm/W). © 2013 American Institute of Physics.
Open Access
Electroluminescence efficiency enhancement in quantum dot light-emitting diodes by embedding a silver nanoisland layer
(Wiley-VCH Verlag, 2015) Yang, X.; Hernandez-Martinez, P. L.; Dang C.; Mutlugün, E.; Zhang, K.; Demir, Hilmi Volkan; Sun X. W.
A colloidal quantum dot light-emitting diode (QLED) is reported with substantially enhanced electroluminescence by embedding a thin layer of Ag nanoislands into hole transport layer. The maximum external quantum efficiency (EQE) of 7.1% achieved in the present work is the highest efficiency value reported for green-emitting QLEDs with a similar structure, which corresponds to 46% enhancement compared with the reference device. The relevant mechanisms enabling the EQE enhancement are associated with the near-field enhancement via an effective coupling between excitons of the quantum dot emitters and localized surface plasmons around Ag nano-islands, which are found to lead to good agreement between the simulation results and the experimental data, providing us with a useful insight important for plasmonic QLEDs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Open Access
Enhancement of polycrystalline silicon solar cells efficiency using indium nitride particles
(Institute of Physics Publishing Ltd., 2015) Alkis, S.; Chowdhury, F. I.; Alevli, M.; Dietz, N.; Yalızay, B.; Aktürk, S.; Nayfeh, A.; Okyay, Ali Kemal
In this work, we present a hybrid indium nitride particle/polycrystalline silicon solar cell based on 230 nm size indium nitride particles (InN-Ps) obtained through laser ablation. The solar cell performance measurements indicate that there is an absolute 1.5% increase (Δη) in the overall solar cell efficiency due to the presence of InN-Ps. Within the spectral range 300-1100 nm, improvements of up to 8.26% are observed in the external quantum efficiency (EQE) and increases of up to 8.75% are observed in the internal quantum efficiency (IQE) values of the corresponding solar cell. The enhancement in power performance is due to the down-shifting properties of the InN-Ps. The electrical measurements are supplemented by TEM, Raman, UV/VIS and PL spectroscopy of the InN-Ps. © 2015 IOP Publishing Ltd.
Open Access
High external quantum efficiency light-emitting diodes enabled by advanced heterostructures of Type-II nanoplatelets
(American Chemical Society, 2023-04-25) Durmuşoğlu, E. G.; Hu, S.; Hernandez-Martinez, P. L.; İzmir, M.; Shabani, Farzan; Guo, M.; Gao, H.; Işık, Furkan; Delikanlı, Savaş; Sharma, V. K.; Liu, B.; Demir, Hilmi Volkan
Colloidal quantum wells (CQWs), also known as nanoplatelets (NPLs), are exciting material systems for numerous photonic applications, including lasers and light-emitting diodes (LEDs). Although many successful type-I NPL-LEDs with high device performance have been demonstrated, type-II NPLs are not fully exploited for LED applications, even with alloyed type-II NPLs with enhanced optical properties. Here, we present the development of CdSe/CdTe/CdSe core/crown/crown (multi-crowned) type-II NPLs and systematic investigation of their optical properties, including their comparison with the traditional core/crown counterparts. Unlike traditional type-II NPLs such as CdSe/CdTe, CdTe/CdSe, and CdSe/CdSexTe1–x core/crown heterostructures, here the proposed advanced heterostructure reaps the benefits of having two type-II transition channels, resulting in a high quantum yield (QY) of 83% and a long fluorescence lifetime of 73.3 ns. These type-II transitions were confirmed experimentally by optical measurements and theoretically using electron and hole wave function modeling. Computational study shows that the multi-crowned NPLs provide a better-distributed hole wave function along the CdTe crown, while the electron wave function is delocalized in the CdSe core and CdSe crown layers. As a proof-of-concept demonstration, NPL-LEDs based on these multi-crowned NPLs were designed and fabricated with a record high external quantum efficiency (EQE) of 7.83% among type-II NPL-LEDs. These findings are expected to induce advanced designs of NPL heterostructures to reach a fascinating level of performance, especially in LEDs and lasers.
Open Access
High external quantum efficiency light-emitting diodes enabled by advanced heterostructures of type-ii nanoplatelets
(American Chemical Society, 2023-03-13) Durmusoglu, Emek G.; Hu, Sujuan; Hernandez-Martinez, Pedro Ludwig; Izmir, Merve; Shabani,Farzan; Guo, Min; Gao, Huayu; Isik, Furkan; Delikanli, Savas; Sharma, Vijay Kumar; Liu, Baiquan; Demir, Hilmi Volkan
Colloidal quantum wells (CQWs), also known as nanoplatelets (NPLs), are exciting material systems for numerous photonic applications, including lasers and light-emitting diodes (LEDs). Although many successful type-I NPL-LEDs with high device performance have been demonstrated, type-II NPLs are not fully exploited for LED applications, even with alloyed type-II NPLs with enhanced optical properties. Here, we present the development of CdSe/CdTe/CdSe core/crown/crown (multi-crowned) type-II NPLs and systematic investigation of their optical properties, including their comparison with the traditional core/crown counterparts. Unlike traditional type-II NPLs such as CdSe/CdTe, CdTe/CdSe, and CdSe/CdSexTe1–x core/crown heterostructures, here the proposed advanced heterostructure reaps the benefits of having two type-II transition channels, resulting in a high quantum yield (QY) of 83% and a long fluorescence lifetime of 73.3 ns. These type-II transitions were confirmed experimentally by optical measurements and theoretically using electron and hole wave function modeling. Computational study shows that the multi-crowned NPLs provide a better-distributed hole wave function along the CdTe crown, while the electron wave function is delocalized in the CdSe core and CdSe crown layers. As a proof-of-concept demonstration, NPL-LEDs based on these multi-crowned NPLs were designed and fabricated with a record high external quantum efficiency (EQE) of 7.83% among type-II NPL-LEDs. These findings are expected to induce advanced designs of NPL heterostructures to reach a fascinating level of performance, especially in LEDs and lasers.
Open Access
High performance infrared photodetectors up to 2.8 μm wavelength based on lead selenide colloidal quantum dots
(OSA - The Optical Society, 2017) Thambidurai, M.; Jang, Y.; Shapiro, A.; Yuan, G.; Xiaonan, H.; Xuechao, Y.; Wang, Q. J.; Lifshitz, E.; Demir, Hilmi Volkan; Dang C.
The strong quantum confinement effect in lead selenide (PbSe) colloidal quantum dots (CQDs) allows to tune the bandgap of the material, covering a large spectral range from mid- to near infrared (NIR). Together with the advantages of low-cost solution processability, flexibility and easy scale-up production in comparison to conventional semiconductors especially in the mid- to near infrared range, PbSe CQDs have been a promising material for infrared optoelectronic applications. In this study, we synthesized monodisperse and high purity PbSe CQDs and then demonstrated the photodetectors working at different wavelengths up to 2.8 μm. Our high quality PbSe CQDs show clear multiple excitonic absorption peaks. PbSe CQD films of different thicknesses were deposited on interdigitated platinum electrodes by a simple drop casting technique to make the infrared photodetectors. At room temperature, the high performances of our PbSe CQD photodetectors were achieved with maximum responsivity, detectivity and external quantum efficiency of 0.96 A/W, 8.13 × 109 Jones and 78% at 5V bias. Furthermore, a series of infrared LEDs with a broad wavelength range from 1.5 μm to 3.4 μm was utilized to demonstrate the performance of our fabricated photodetectors with various PbSe CQD film thicknesses.
Open Access
Improved InGaN/GaN light-emitting diodes with a p-GaN/n-GaN/p-GaN/n-GaN/p-GaN current-spreading layer
(Optical Society of American (OSA), 2013) Zhang, Z.-H.; Tan, S.T.; Liu W.; Ju, Z.; Zheng, K.; Kyaw, Z.; Ji, Y.; Hasanov, N.; Sun X.W.; Demir, Hilmi Volkan
This work reports both experimental and theoretical studies on the InGaN/GaN light-emitting diodes (LEDs) with optical output power and external quantum efficiency (EQE) levels substantially enhanced by incorporating p-GaN/n-GaN/p-GaN/n-GaN/p-GaN (PNPNP-GaN) current spreading layers in p-GaN. Each thin n-GaN layer sandwiched in the PNPNP-GaN structure is completely depleted due to the built-in electric field in the PNPNP-GaN junctions, and the ionized donors in these n-GaN layers serve as the hole spreaders. As a result, the electrical performance of the proposed device is improved and the optical output power and EQE are enhanced. © 2013 Optical Society of America.
Open Access
Improving hole injection efficiency by manipulating the hole transport mechanism through p-type electron blocking layer engineering
(Optical Society of America, 2014) Zhang, Zi-Hui; Ju, Z.; Liu W.; Tan S.T.; Ji Y.; Kyaw, Z.; Zhang X.; Hasanov N.; Sun, X. W.; Demir, Hilmi Volkan
The p-type AlGaN electron blocking layer (EBL) is widely used in InGaN/GaN light-emitting diodes (LEDs) for electron overflow suppression. However, a typical EBL also reduces the hole injection efficiency, because holes have to climb over the energy barrier generated at the p-AlGaN/p-GaN interface before entering the quantum wells. In this work, to address this problem, we report the enhancement of hole injection efficiency by manipulating the hole transport mechanism through insertion of a thin GaN layer of 1 nm into the p-AlGaN EBL and propose an AlGaN/GaN/AlGaN-type EBL outperforming conventional AlGaN EBLs. Here, the position of the inserted thin GaN layer relative to the p-GaN region is found to be the key to enhancing the hole injection efficiency. InGaN/ GaN LEDs with the proposed p-type AlGaN/GaN/AlGaN EBL have demonstrated substantially higher optical output power and external quantum efficiency.
Open Access
Investigation of p-type depletion doping for InGaN/GaN-based light-emitting diodes
(American Institute of Physics Inc., 2017) Zhang, Y.; Zhang Z.-H.; Tan S.T.; Hernandez-Martinez, P. L.; Zhu B.; Lu S.; Kang, X. J.; Sun, X. W.; Demir, Hilmi Volkan
Due to the limitation of the hole injection, p-type doping is essential to improve the performance of InGaN/GaN multiple quantum well light-emitting diodes (LEDs). In this work, we propose and show a depletion-region Mg-doping method. Here we systematically analyze the effectiveness of different Mg-doping profiles ranging from the electron blocking layer to the active region. Numerical computations show that the Mg-doping decreases the valence band barrier for holes and thus enhances the hole transportation. The proposed depletion-region Mg-doping approach also increases the barrier height for electrons, which leads to a reduced electron overflow, while increasing the hole concentration in the p-GaN layer. Experimentally measured external quantum efficiency indicates that Mg-doping position is vitally important. The doping in or adjacent to the quantum well degrades the LED performance due to Mg diffusion, increasing the corresponding nonradiative recombination, which is well supported by the measured carrier lifetimes. The experimental results are well numerically reproduced by modifying the nonradiative recombination lifetimes, which further validate the effectiveness of our approach.
Open Access
Low-cost, large-scale, ordered ZnO nanopillar arrays for light extraction efficiency enhancement in quantum dot light-emitting diodes
(IEEE, 2014) Yang, X.; Dev, K.; Wang, J.; Mutlugün, E.; Dang, C.; Zhao, Y.; Tan, S. T.; Sun, X. W.; Demir, Hilmi Volkan
We report a QLED with enhanced light outcoupling efficiency by applying a layer of periodic ZnO nanopillar arrays. The resulting QLED reaches the record external quantum efficiency (EQE) of 9.34% in green-emitting QLEDs with a similar device structure.
Open Access
Nanocrystal LEDs with enhanced external quantum efficiency enabled by the use of phosphorescent molecules
(IEEE, 2013) Mutlugün, Evren; Abiyasa, A.P.; Güzeltürk, Burak; Gao, Y.; Leck, K.S.; Sun X.W.; Demir, Hilmi Volkan
We report efficiency enhancement in quantum dot (QD) based LEDs with the aid of excitonic energy transfer from co-doped TCTA:Ir(ppy)3 layer to CdSe/ZnS QDs while providing spectrally pure emission. © 2013 IEEE.
Open Access
Nanosecond pulsed laser ablated sub-10 nm silicon nanoparticles for improving photovoltaic conversion efficiency of commercial solar cells
(Institute of Physics Publishing Ltd., 2017) Rasouli, H. R.; Ghobadi, A.; Ghobadi, T. G. U.; Ates, H.; Topalli, K.; Okyay, Ali Kemal
In this paper, we demonstrate the enhancement of photovoltaic (PV) solar cell efficiency using luminescent silicon nanoparticles (Si-NPs). Sub-10 nm Si-NPs are synthesized via pulsed laser ablation technique. These ultra-small Si nanoparticles exhibit photoluminescence (PL) character tics at 425 and 517 nm upon excitation by ultra-violet (UV) light. Therefore, they can act as secondary light sources that convert high energetic photons to ones at visible range. This down-shifting property can be a promising approach to enhance PV performance of the solar cell, regardless of its type. As proof-of-concept, polycrystalline commercial solar cells with an efficiency of ca 10% are coated with these luminescent Si-NPs. The nanoparticle-decorated solar cells exhibit up to 1.64% increase in the external quantum efficiency with respect to the uncoated reference cells. According to spectral photo-responsivity characterizations, the efficiency enhancement is stronger in wavelengths below 550 nm. As expected, this is attributed to down-shifting via Si-NPs, which is verified by their PL characteristics. The results presented here can serve as a beacon for future performance enhanced devices in a wide range of applications based on Si-NPs including PVs and LED applications.
Open Access
Nonradiative recombination-Critical in choosing quantum well number for InGaN/GaN light-emitting diodes
(Optical Society of American (OSA), 2015) Zhang, Y.P.; Zhang, Z.-H.; Liu W.; Tan, S.T.; Ju, Z.G.; Zhang X.L.; Ji, Y.; Wang L.C.; Kyaw, Z.; Hasanov, N.; Zhu, B.B.; Lu, S.P.; Sun X.W.; Demir, Hilmi Volkan
In this work, InGaN/GaN light-emitting diodes (LEDs) possessing varied quantum well (QW) numbers were systematically investigated both numerically and experimentally. The numerical computations show that with the increased QW number, a reduced electron leakage can be achieved and hence the efficiency droop can be reduced when a constant Shockley-Read-Hall (SRH) nonradiative recombination lifetime is used for all the samples. However, the experimental results indicate that, though the efficiency droop is suppressed, the LED optical power is first improved and then degraded with the increasing QW number. The analysis of the measured external quantum efficiency (EQE) with the increasing current revealed that an increasingly dominant SRH nonradiative recombination is induced with more epitaxial QWs, which can be related to the defect generation due to the strain relaxation, especially when the effective thickness exceeds the critical thickness. These observations were further supported by the carrier lifetime measurement using a pico-second time-resolved photoluminescence (TRPL) system, which allowed for a revised numerical modeling with the different SRH lifetimes considered. This work provides useful guidelines on choosing the critical QW number when designing LED structures. © 2014 Optical Society of America.
Open Access
Observation of biexcitons in the presence of trions generated via sequential absorption of multiple photons in colloidal quantum dot solids
(IEEE, 2012) Cihan, Ahmet Fatih; Hernandez-Martinez Pedro L.; Kelestemur, Yusuf; Demir, Hilmi Volkan
Multi exciton generation (MEG) and multi exciton recombination (MER) in semiconductor quantum dots (QDs) have recently attracted significant scientific interest as a possible means to improve device efficiencies [1-5]. Convenient bandgap tunability, easy colloidal synthesis, and solution-based processability of these QDs make them further attractive for such device applications using MEG and MER. For example, recent theoretical and experimental studies have shown that MEG enables >100% peak external quantum efficiency where the generated multi excitons (MEs) are collected in a simple QD solar cell structure [1]. Furthermore, MEG has also been shown in QD photodetectors exhibiting substantially increased photocurrent levels [2]. Another promising application for MEs is the use of QDs as an alternative gain medium based on MER for lasers. Although MEG is very promising and supported with quite persuasive reports, there are still some debatable issues that need to be clarified. One of the issues that have generated great debates in the field has been the confusion of MER with the recombination of trions, which takes place in photocharged QDs. To utilize MEG and MER in practical devices such as QD solar cells and QD lasing devices, these phenomena need to be well understood. Here, we showed distinct spectrally-resolved temporal behavior of biexciton (BX), single exciton (X) and trion radiative recombinations in near unity quantum yield (QY) quasi-type II CdSe/CdS core/shell nanocrystal QDs. Upon sequential absorption of multiple photons, the extraction of Xs, BXs, and trions were achieved using time correlated single photon counting (TCSPC) measurements performed on low concentration thin film samples of these QDs at different emission wavelengths. The QDs were embedded in PMMA medium to obtain homogeneous samples and avoid Förster-type nonradiative energy transfer (NRET) between them. Here to extract Xs, BXs, and trions, we devised a new analysis approach for the time decays of the QDs that allowed us to attribute the physical events to their corresponding time decay terms, which were further verified with their excitation intensity dependencies [6]. © 2012 IEEE.