Browsing by Subject "Electronic nose"

Now showing 1 - 3 of 3

Open Access
Binary coded identification of industrial chemical vapors with an optofluidic nose
(OSA - The Optical Society, 2016) Adamu, A. I.; Ozturk, F. E.; Bayındır, Mehmet
An artificial nose system for the recognition and classification of gas-phase analytes and its application in identifying common industrial gases is reported. The sensing mechanism of the device comprises the measurement of infrared absorption of volatile analytes inside the hollow cores of optofluidic Bragg fibers. An array of six fibers is used, where each fiber targets a different region of the mid-infrared in the range of 2-14 ìm with transmission bandwidths of about 1-3 μm. The quenching in the transmission of each fiber due to the presence of analyte molecules in the hollow core is measured separately and the cross response of the array allows the identification of virtually any volatile organic compound (VOC). The device was used for the identification of seven industrial VOC vapors with high selectivity using a standard blackbody source and an infrared detector. The array response is registered as a unique six digit binary code for each analyte by assigning a threshold value to the fiber transmissions. The developed prototype is a comprehensive and versatile artificial nose that is applicable to a wide range of analytes.
Open Access
Bio-insprired optoelectronic digital nose for breath analysis
(2011) Bayındır, Mehmet; Yıldırım, Adem; Yaman, Mecit; Vural, Mert
A novel electronic nose device is presented that can be used in disease diagnostics by exhaled breath analysis. Exhaled breath contains more than a thousand organic compounds that can be analysed to insect various diseases and metabolic activity. The novel device is an electronic nose, based on photonic bandgap fibers that can selectively guide infrared radition inside a hollow core plastic fiber. Instead of a laser line source, a broadband balackbody source is used that exploits the filtering/ guiding properties of the fibers to scan the whole mid-infrared region, making it high selectivity of volatile organic compounds possible. In addition waveguiding inside the fiber enhances the electromagnetic radiation intensity, resulting in improved infrared absorption cross-section. The fiber electronic nose can be integrated and deployed as a portable electronics device to point-of-care institutes.
Open Access
Vapor sensing of colorectal cancer biomarkers in isolation by bare and functionalized nanoelectromechanical sensors
(Institute of Electrical and Electronics Engineers, 2023-08-04) Karakan, M. C.; Ari, Atakan B.; Kelleci, M.; Yanik, C.; Kaya, I. I.; Tastan, O.; Hanay, M. Selim
Small dimensions and high resonance frequencies render nanoelectromechanical systems (NEMS) sensitive mass detectors. Mass detection capability can be used to sense chemicals in the gas phase by functionalizing the device, usually with a polymeric film. The performance of NEMS-based gas detectors in breath analysis applications depends crucially on the selectivity between selected functionalization layers and targeted biomarkers. Here, we report the detection of four colorectal cancer biomarkers at parts-per-million concentration levels, when introduced in isolation to the sensor system within a dry nitrogen stream. The biomarkers, 3-methylpentane, cyclohexane, nonanal, and decanal, were then discriminated from each other by using the combined response of three NEMS devices: one bare device, and two devices coated with either poly(ethyleneoxide) or poly(caprolactone). Our results indicate that bare NEMS are more responsive to high molar mass biomarkers, whereas functionalized sensors are more responsive toward more volatile biomarkers. Considering the inherently fast response times and minuscule limits of detection of NEMS devices, the combined response of differentially coated sensors can be used as the main sensing element to identify and distinguish cancer biomarkers in human breath.