Browsing by Subject "Diffraction gratings"
Now showing 1 - 16 of 16
- Results Per Page
- Sort Options
Item Open Access Asymmetric Fabry-Perot-type transmission in photonic-crystal gratings with one-sided corrugations at a two-way coupling(American Physical Society, 2012-11-29) Serebryannikov, A. E.; Alici, K. B.; Magath, T.; Cakmak, A. O.; Özbay, EkmelStrongly asymmetric Fabry-Perot-type transmission arising at the two-way coupling has been studied in the case of normal incidence for slabs of two-dimensional photonic crystals (PCs) with one-sided corrugations that are made of linear isotropic materials. Comparing to the scenario of unidirectional transmission known for the structures with broken spatial inversion symmetry that requires zero order being uncoupled, in the studied mechanism zero order is either the sole order or one of the orders that may be coupled to a Floquet-Bloch mode. Contrary to the earlier studies of asymmetric transmission at the coupled zero order, structures with nondeep corrugations are considered, which allow one to combine Fabry-Perot-type total-transmission maxima with diffractions in a desired way. At a proper choice of PC lattice and corrugation parameters, higher orders can dominate in Fabry-Perot-type transmission at the noncorrugated-side illumination and also at the total-transmission maxima, whereas only zero order contributes to the transmission at the corrugated-side illumination. As a result, strong asymmetry can be obtained without uncoupling of zero order but it invokes the unidirectional contribution of higher orders. The presented results show that the entire structure can be approximately decomposed into the two independent, regular and grating (nonregular), parts whose contributions to the transmission are additive. Multiple asymmetric transmission maxima can coexist with a rather high equivalent group index of refraction. Possible applications of the studied transmission mechanism are discussed.Item Open Access Broadband circular polarizer based on high-contrast gratings(Optical Society of America, 2012-05-30) Mutlu, M.; Akosman, A. E.; Özbay, EkmelA circular polarizer, which is composed of periodic and two-dimensional dielectric high-contrast gratings, is designed theoretically such that a unity conversion efficiency is achieved at λ0 = 1.55 μm. The operation is obtained by the achievement of the simultaneous unity transmission of transverse magnetic and transverse electric waves with a phase difference of π/2, meaning that an optimized geometrical anisotropy is accomplished. By the utilization of the rigorous coupled-wave analysis and finite-difference time-domain methods, it is shown that a percent bandwidth of ∼50% can be achieved when the operation bandwidth is defined as the wavelengths for which the conversion efficiency exceeds 0.9.Item Open Access Broadband quarter-wave plates at near-infrared using high-contrast gratings(2013) Mutlu, M.; Akosman, A.E.; Kurt G.; Gokkavas, M.; Özbay, EkmelIn this paper, we report the theoretical and experimental possibility of achieving a quarter-wave plate regime by using high-contrast gratings, which are binary, vertical, periodic, near-wavelength, and two-dimensional high refractive index gratings. Here, we investigate the characteristics of two distinct designs, the first one being composed of silicon-dioxide and silicon, and the second one being composed of silicon and sapphire. The suggested quarter-wave plate regime is achieved by the simultaneous optimization of the transverse electric and transverse magnetic transmission coefficients, TTE and TTM, respectively, and the phase difference between these transmission coefficients, such that |TTM| ≅ |TTE| and \TTM - \TTE ≅ -/2. As a result, a unity circular polarization conversion efficiency is achieved atλ0 = 1.55 μm for both designs. For the first design, we show the obtaining of unity conversion efficiency by using a theoretical approach, which is inspired by the periodic waveguide interpretation, and rigorous coupled-wave analysis (RCWA). For the second design, we demonstrate the unity conversion efficiency by using the results of finite-difference time-domain (FDTD) simulations. Furthermore, the FDTD simulations, where material dispersion is taken into account, suggest that an operation percent bandwidth of 51% can be achieved for the first design, where the experimental results for the second design yield a bandwidth of 33%. In this context, we define the operation regime as the wavelength band for which the circular conversion efficiency is larger than 0.9. © 2013 SPIE.Item Open Access Directional selectivity through the subwavelength slit in metallic gratings(IEEE, 2011) Çakmakyapan, Semih; Çaglayan, Hümeyra; Serebryannikov, Andriy; Özbay, EkmelAn approach for obtaining strong directional selectivity through a single subwavelength slit in non-symmetric metallic gratings is shown theoretically and experimentally. Directionality effect originates from the different resonance frequencies of two interfaces. © 2011 OSA.Item Open Access Dispersion irrelevant wideband asymmetric transmission in dielectric photonic crystal gratings(Optical Society of America, 2012-11-22) Serebryannikov, A. E.; Colak, E.; Cakmak, A. O.; Özbay, EkmelWideband suppression of zero order and relevant strongly asymmetric transmission can be obtained in photonic crystal gratings that are made of linear isotropic materials and show the broken structural (axial) symmetry, even if zero diffraction order may be coupled to a Floquet-Bloch (FB) wave at the incidence and exit interfaces. The studied mechanism requires that the peculiar diffractions at the corrugated exit interface inspire strong energy transfer to higher orders, including those not coupled to an FB wave. At the opposite direction of incidence, transmission due to zero and some higher orders that may be coupled at the corrugated input interface can vanish. This leads to the alternative scenario of wideband unidirectional transmission, which itself does not need but can coexist with the other scenario based on the merging of asymmetric diffraction and dispersion of the FB mode.Item Open Access Experimental validation of strong directional selectivity in nonsymmetric metallic gratings with a subwavelength slit(American Institute of Physics, 2011-02-02) Cakmakyapan, S.; Caglayan, H.; Serebryannikov, A. E.; Özbay, EkmelStrong directional selectivity is theoretically predicted and experimentally validated at the microwave frequencies in the beaming regime for a single subwavelength slit in nonsymmetric metallic gratings with double-side corrugations. The operation regime can be realized at a fixed angle of incidence when the surface-plasmon assisted transmission is significant within a narrow range of observation angles, if illuminating one of the grating interfaces, and tends to vanish for all observation angles, if illuminating the opposite interface. The studied effect is connected with asymmetry (nonreciprocity) in the beaming that occurs if the surface plasmon properties are substantially different for the two interfaces being well isolated from each other.Item Open Access High-efficiency multilevel volume diffraction gratings inside silicon(American Chemical Society, 2023-11-08) Bütün, Mehmet; Saylan, Sueda; Sabet, Rana Asgari; Tokel, OnurSilicon (Si)-based integrated photonics is considered to play a pivotal role in multiple emerging technologies, including telecommunications, quantum computing, and lab-chip systems. Diverse functionalities are either implemented on the wafer surface (“on-chip”) or recently within the wafer (“in-chip”) using laser lithography. However, the emerging depth degree of freedom has been exploited only for single-level devices in Si. Thus, monolithic and multilevel discrete functionality is missing within the bulk. Here, we report the creation of multilevel, high-efficiency diffraction gratings in Si using three-dimensional (3D) nonlinear laser lithography. To boost device performance within a given volume, we introduce the concept of effective field enhancement at half the Talbot distance, which exploits self-imaging onto discrete levels over an optical lattice. The novel approach enables multilevel gratings in Si with a record efficiency of 53%, measured at 1550 nm. Furthermore, we predict a diffraction efficiency approaching 100%, simply by increasing the number of levels. Such volumetric Si-photonic devices represent a significant advance toward 3D-integrated monolithic photonic chips.Item Open Access Multichannel optical diode with unidirectional diffraction relevant total transmission(Optical Society of American (OSA), 2012) Serebryannikov, A.E.; Cakmak, A.O.; Özbay, EkmelWe will show that broadband unidirectional optical transmission with a total transmission maximum inside the band can be obtained for linearly polarized incident waves in the nonsymmetric photonic crystal gratings made of isotropic linear materials at a fixed nonzero or zero angle of incidence. Being based on the merging of diffraction and dispersion effects, the basic physical mechanism studied exploits the transmission channels associated with higher orders, for which asymmetry in the coupling conditions at the two grating interfaces appears when spatial inversion symmetry is broken. Total transmission in one direction and zero transmission in the opposite direction can be obtained due to hybridization of Fabry-Perot type resonances with a diffraction anomaly that yields a diode-like operation regime. Single-beam deflection and two-beam splitting can be obtained, for which transmission can be (nearly) total, if the corrugated side is illuminated. In contrast to the previous studies, it is also shown that unidirectional transmission can appear only at a fixed frequency and only due to diffractions, when total transmission occurs at the noncorrugated-side illumination, being in agreement with the Lorentz Lemma. © 2012 Optical Society of America.Item Open Access One-way transmission through the subwavelength slit in nonsymmetric metallic gratings(Optical Society of America, 2010-07-27) Cakmakyapan, S.; Serebryannikov, A. E.; Caglayan, H.; Özbay, EkmelAn approach for obtaining one-way transmission in the beaming regime is suggested that is based on the directional radiation of surface plasmons in nonsymmetric metallic gratings with a single slit. In contrast to the various nonsymmetric one-way diffraction gratings that have recently been proposed, the possibility of obtaining of narrow beams is demonstrated. Strong directional selectivity can appear a wide range of the observation angles, while the angle of incidence is retained.Item Open Access Plasmonic band gap structures for surface-enhanced Raman scattering(Optical Society of American (OSA), 2008) Kocabas, A.; Ertas G.; Senlik, S.S.; Aydınlı, AtillaSurface-enhanced Raman Scattering (SERS) of rhodamine 6G (R6G) adsorbed on biharmonic metallic grating structures was studied. Biharmonic metallic gratings include two different grating components, one acting as a coupler to excite surface plasmon polaritons (SPP), and the other forming a plasmonic band gap for the propagating SPPs. In the vicinity of the band edges, localized surface plasmons are formed. These localized Plasmons strongly enhance the scattering efficiency of the Raman signal emitted on the metallic grating surfaces. It was shown that reproducible Raman scattering enhancement factors of over 10 5 can be achieved by fabricating biharmonic SERS templates using soft nano-imprint technique. We have shown that the SERS activities from these templates are tunable as a function of plasmonic resonance conditions. Similar enhancement factors were also measured for directional emission of photoluminescence. At the wavelengths of the plasmonic absorption peak, directional enhancement by a factor of 30 was deduced for photoluminescence measurements. © 2008 Optical Society of America.Item Open Access Plasmonic structures with extraordinary transmission and highly directional beaming properties(Wiley Periodicals, 2006) Cağlayan, H.; Bulu, I.; Özbay, EkmelWe studied the grating-coupling phenomena between surface plasmons and electromagnetic waves in the microwave spectrum. We first present the experimental and theoretical results of an enhanced microwave transmission though a subwavelength circular annular aperture with and without metallic gratings. We demonstrate that a 145-fold enhancement factor could be obtained with a subwavelength circular annular aperture that was surrounded by periodic metallic gratings. This was assisted by the guided mode of the coaxial waveguide and by coupling to the surface plasmons. We present the angular transmission distributions from circular annular apertures, and circular annular apertures surrounded by concentric periodic grooves. At the surface mode resonance frequency, the transmitted electromagnetic waves from the subwavelength circular annular aperture surrounded by concentric periodic grooves have a strong angular confinement with an angular divergence of ±3°. We demonstrate that only the output surface is responsible for the beaming effect. Furthermore, we present the field distributions and showed that there is no beaming effect at the off-resonance frequency. © 2006 Wiley Periodicals, Inc.Item Open Access Resonant excitation of surface plasmons in one-dimensional metallic grating structures at microwave frequencies(Institute of Physics Publishing, 2005) Akarca-Biyikli, S. S.; Bulu, I.; Özbay, EkmelGrating-coupling phenomena between surface plasmons and electromagnetic waves were studied in the microwave spectrum using metallic gratings. Transmission measurements were carried out to observe the transmitted radiation around the surface plasmon resonance frequencies. Grating structures with subwavelength apertures were designed for transmission experiments. Measurements were made in the microwave spectrum of 10-37.5 GHz, corresponding to a wavelength region of 8-30 mm. The A1 samples had a grating periodicity of 16 mm. A 2 mm wide subwavelength slit was opened for transmission samples. Samples with one/double-sided gratings displayed remarkably enhanced transmission and directivity with respect to the reference sample without gratings. The experimental results agreed well with theoretical simulations. ∼50% transmission at 20.7 mm, ∼25-fold enhancement, and ±4° angular divergence were achieved with a ∼λ/10 aperture.Item Open Access A self-doubling optical parametric oscillator based on aperiodically-poled lithium niobate(IEEE, 2001) Kartaloǧlu, Tolga; Figen, Ziya Gürkan; Aytür, OrhanA self-doubling optical parametric oscillator (SDOPO) having one-dimensional aperiodic grating structure based on a LiNbO3 crystal was constructed. The structure was designed to quasi-phase-match both second harmonic generation (SHG) and optical parametric oscillation (OPO) processes. The grating structure contained in the LiNbO3 crystal was based on the construction of a function by summing up two cosine functions with arbitrary phase and amplitude.Item Open Access Spoof-plasmon relevant one-way collimation and multiplexing at beaming from a slit in metallic grating(Optical Society of America, 2012) Çakmakyapan, Semih; Serebryannikov, A.E.; Caglayan H.; Özbay, EkmelDiode and collimator/multiplexer functions are suggested to be combined in one device that is based on a thin metallic grating with a single subwavelength slit. A proper choice of the structural (a)symmetry of the grating can result in obtaining one-way collimation and multiplexing with a single on-axis or off-axis, or two off-axis narrow outgoing beams. It is possible due to freedom in utilizing different combinations of the excitation conditions of the spoof surface plasmons at the four grating parts - right and left front-side and right and left back-side ones. Such a combining provides one with an efficient tool to engineer one-way collimators and multiplexers with the desired characteristics. Strong asymmetry in transmission with respect to the incidence direction (forward vs backward case) can be obtained within a wide range of variation of the incident beam parameters, i.e., angle of incidence and frequency, while the outgoing radiation is concentrated within a narrow range of the observation angle variation. Most of the observed asymmetric transmission features can be qualitatively explained using the concept of the equivalent source placed inside the slit. © 2012 Optical Society of America.Item Open Access Surface wave splitter based on metallic gratings with sub-wavelength aperture(Optical Society of American (OSA), 2008) Caglayan H.; Özbay, EkmelWe investigated the splitting of surface electromagnetic waves trapped at the output surface of a one-dimensional metallic grating structure. The output gratings of the structure asymmetrically such that the output surfaces at the different sides of the subwavelength aperture can support surface waves at different frequencies. The transmission amplitude as measured at the left side is 1,000 times of that at the right side at 16 GHz. At 24 GHz, the transmission measured at the right side is 20 times that of the left side of the structure. Therefore, surface waves are guided into the different sides of the aperture at different frequencies via metallic gratings. The experimental results are in agreement with the theoretical results. © 2008 Optical Society of America.Item Open Access Tuning optical discs for plasmonic applications(Springer New York, 2009) Kaplan, B.; Guner, H.; Senlik, O.; Gurel, K.; Bayındır, Mehmet; Dana, A.We present simple physical and chemical procedures that allow tuning and modification of the topography of gratings present in optical storage discs into geometries optimal for grating coupled plasmon resonance excitation. After proper metal coating, the tuned surfaces exhibit sharp plasmon resonances that can be excited at wavelengths ranging from 260 nm to over 2.7 μm with relatively high quality factors. As an immediate exemplary application, use of such optimized gratings in aqueous medium for refractive index measurement is demonstrated.