Browsing by Subject "Barrier heights"

Now showing 1 - 4 of 4

Open Access
A controllable spin prism
(IOP Institute of Physics Publishing, 2009) Hakiolu, T.
Based on Khodas et al (2004 Phys. Rev. Lett. 92 086602), we propose a device acting like a controllable prism for an incident spin. The device is a large quantum well where Rashba and Dresselhaus spin-orbit interactions are present and controlled by the plunger gate potential, the electric field and the barrier height. A totally destructive interference can be manipulated externally between the Rashba and Dresselhaus couplings. The spin-dependent transmission/reflection amplitudes are calculated as the control parameters are changed. The device operates as a spin prism/converter/filter in different regimes and may stimulate research in promising directions in spintronics in analogy with linear optics. © 2009 IOP Publishing Ltd.
Open Access
Electrical characterization of MS and MIS structures on AlGaN/AlN/GaN heterostructures
(ELSEVIER, 2010) Arslan, E.; Bütün, S.; Şafak, Y.; Uslu, H.; Tascioglu I.; Altindal, S.; Özbay, Ekmel
The forward and reverse bias I-V, C-V, and G/ω-V characteristics of (Ni/Au) Schottky barrier diodes (SBDs) on the Al 0.22Ga 0.78N/AlN/GaN high-electron-mobility-transistor (HEMTs) without and with SiN x insulator layer were measured at room temperature in order to investigate the effects of the insulator layer (SiN x) on the main electrical parameters such as the ideality factor (n), zero-bias barrier height ( B0), series resistance (R s), interface-state density (N ss). The energy density distribution profiles of the N ss were obtained from the forward bias I-V characteristics by taking into account the voltage dependence of the effective barrier height ( e) and ideality factor (n V) of devices. In addition, the N ss as a function of E c-E ss was determined from the low-high frequency capacitance methods. It was found that the values of N ss and R s in SBD HEMTs decreases with increasing insulator layer thickness.
Open Access
The substrate temperature dependent electrical properties of titanium dioxide thin films
(2010) Yildiz, A.; Lisesivdin, S.B.; Kasap, M.; Mardare, D.
Titanium dioxide thin films were obtained by a dc sputtering technique onto heated glass substrates. The relationship between the substrate temperature and the electrical properties of the films was investigated. Electrical resistivity measurements showed that three types of conduction channels contribute to conduction mechanism in the temperature range of 13-320 K. The temperature dependence of electrical resistivity between 150 and 320 K indicated that electrical conductioninthe films was controlled by potential barriers caused by depletion of carriers at grain boundaries. The conduction mechanism of the films was shifted from grain boundary scattering dominated band conduction to the nearest neighbor hopping conduction at temperatures between 55 and 150 K. Below 55 K, the temperature dependence of electrical resistivity shows variable range hopping conduction. The correlation between the substrate temperature and resistivity behaviorisdiscussed by analyzing the physical plausibility of the hopping parameters and material properties derived by applying different conduction models. With these analyses, various electrical parameters of the present samples such as barrier height, donor concentration, density of states at the Fermi level, acceptor concentration and compensation ratio were determined. Their values as a function of substrate temperature were compared. © Springer Science+Business Media, LLC 2009.
Open Access
Ta/Si Schottky diodes fabricated by magnetron sputtering technique
(2010) Ocak, Y.S.; Genisel, M.F.; Kiliçoǧlu, T.
Electrical properties of Ta/n-Si and Ta/p-Si Schottky barrier diodes obtained by sputtering of tantalum (Ta) metal on semiconductors have been investigated. The characteristic parameters of these contacts like barrier height, ideality factor and series resistance have been calculated using current voltage (I-V) measurements. It has seen that the diodes have ideality factors more than unity and the sum of their barrier heights is 1.21 eV which is higher than the band gap of the silicon (1.12 eV). The results have been attributed the effects of inhomogeneities at the interface of the devices and native oxide layer. In addition, the barrier height values determined using capacitance-voltage (C-V) measurements have been compared the ones obtained from I-V measurements. It has seen that the interface states have strong effects on electrical properties of the diodes such as C-V and Rs-V measurements. © 2010 Elsevier Ltd. All rights reserved.