Browsing by Subject "Arrays"

Now showing 1 - 12 of 12

Open Access
Biomimicry of multifunctional nanostructures in the neck feathers of mallard (Anas platyrhynchos L.) drakes
(Nature Publishing Group, 2014-04-22) Khudiyev, T.; Dogan, T.; Bayındır, Mehmet
Biological systems serve as fundamental sources of inspiration for the development of artificially colored devices, and their investigation provides a great number of photonic design opportunities. While several successful biomimetic designs have been detailed in the literature, conventional fabrication techniques nonetheless remain inferior to their natural counterparts in complexity, ease of production and material economy. Here, we investigate the iridescent neck feathers of Anas platyrhynchos drakes, show that they feature an unusual arrangement of two-dimensional (2D) photonic crystals and further exhibit a superhydrophobic surface, and mimic this multifunctional structure using a nanostructure composite fabricated by a recently developed top-down iterative size reduction method, which avoids the above-mentioned fabrication challenges, provides macroscale control and enhances hydrophobicity through the surface structure. Our 2D solid core photonic crystal fibres strongly resemble drake neck plumage in structure and fully polymeric material composition, and can be produced in wide array of colors by minor alterations during the size reduction process.
Open Access
Design and implementation of capacitive micromachined ultrasonic transducers for high power
(IEEE, 2011) Yamaner F.Y.; Ölçüm, Selim; Bozkurt, A.; Köymen, Hayrettin; Atalar, Abdullah
Capacitive micromachined ultrasonic transducers (CMUTs) have a strong potential to compete piezoelectric transducers in high power applications. In a CMUT, obtaining high port pressure competes with high particle velocity: a small gap is required for high electrostatic force while particle displacement is limited by the gap height. On the other hand, it is shown in [1] that CMUT array exhibits radiation impedance maxima over a relatively narrow frequency band. In this paper, we describe a design approach in which CMUT array elements resonate at the frequency of maximum impedance and have gap heights such that the generated electrostatic force in uncollapsed mode, can sustain particle displacement peak amplitude up to the gap height. The CMUT parameters are optimized for around 3 MHz of operation, using both a SPICE model and FEM. The optimized parameters require a thick membrane and low gap heights to get maximum displacement without collapsing membrane during the operation. We used anodic bonding process to fabricate CMUT arrays. A conductive 100 μm silicon wafer is bonded to a glass wafer. Before the bonding process, the silicon wafer is thermally oxidized to create an insulating layer which prevents break down in the operation. Then, the cavities are formed on the insulating layer by a wet etch. The gap height is set to 100 nm. Meanwhile, the glass wafer is dry etched by 120 nm and the etched area is filled by gold evaporation to create the bottom electrodes. The wafers are dipped into piranha solution and bonding process is done afterwards. The fabricated CMUTs are tested in an oil tank. To eliminate the DC voltage which may cause charging problem in the operation, we tried to drive the CMUT array with large continuous wave signals at half of the operating frequency. We observed 1MPa peak to peak pressure with -23 dB second harmonic at the surface of the array (Fig. 1). The proposed design further extends the operation of CMUTs. Observing low harmonic distortions at high output pressure levels, without any charging problem, make CMUT a big candidate for high power applications. © 2011 IEEE.
Open Access
Low-threshold Lasing eigenmodes of infinite periodic chain of quantum wires
(Optical Society of America, 2010-10-26) Byelobrov, V.; Ctyroky, J.; Benson, T. M.; Sauleau, R.; Altintas, A.; Nosich, A. I.
We study the lasing eigenvalue problems for a periodic open optical resonator made of an infinite grating of circular dielectric cylinders standing in free space, in the E- and H-polarization modes. If possessing a “negative-absorption” refractive index, such cylinders model a chain of quantum wires made of the gain material under pumping. The initial-guess values for the lasing frequencies are provided by the plane-wave scattering problems. We demonstrate a new effect: the existence of specific grating eigenmodes that have a low threshold of lasing even if the wires are optically very thin.
Open Access
Multistage optical interconnection architectures with the least possible growth of system size
(Optical Society of America, 1993) Özaktaş, Haldun M.; Mendlovic, D.
Multistage interconnection architectures can provide an arbitrary pattern of one-to-one connections between N input and N output channels. We show that bitonic multistage architectures, such as the Banyan architecture, result in the fundamentally least possible growth of system size with increasing N.
Open Access
Optimization of the gain-bandwidth product of capacitive micromachined ultrasonic transducers
(IEEE, 2005-12) Olcum, S.; Senlik, M. N.; Atalar, Abdullah
Capacitive micromachined ultrasonic transducers (cMUT) have large bandwidths, but they typically have low conversion efficiencies. This paper defines a performance measure in the form of a gain-bandwidth product and investigates the conditions in which this performance measure is maximized. A Mason model corrected with finite-element simulations is used for the purpose of optimizing parameters. There are different performance measures for transducers operating in transmit, receive, or pulse-echo modes. Basic parameters of the transducer are optimized for those operating modes. Optimized values for a cMUT with silicon nitride membrane and immersed in water are given. The effect of including an electrical matching network is considered. In particular, the effect of a shunt inductor in the gain-bandwidth product is investigated. Design tools are introduced, which are used to determine optimal dimensions of cMUTs with the specified frequency or gain response.
Open Access
Parallel atomic force microscopy with optical interferometric detection
(American Institute of Physics, 2001-01-05) Sulchek, T.; Grow, R. J.; Yaralioglu, G. G.; Minne, S. C.; Quate, C. F.; Manalis, S. R.; Kiraz, A.; Aydine, A.; Atalar, Abdullah
We have developed an atomic force microscope that uses interferometry for parallel readout of a cantilever array. Each cantilever contains a phase sensitive diffraction grating consisting of a reference and movable set of interdigitated fingers. As a force is applied to the tip, the movable set is displaced and the intensity of the diffracted orders is altered. The order intensity from each cantilever is measured with a custom array of siliconphotodiodes with integrated complementary metal–oxide–semiconductor amplifiers. We present images from five cantilevers acquired in the constant height mode that reveal surface features 2 nm in height. The interdigital method for cantilever array readout is scalable, provides angstrom resolution, and is potentially simpler to implement than other methods. © 2001 American Institute of Physics
Open Access
Paraxial space - domain formulation for surface fields on large dielectric coated circular cylinders
(IEEE, 2001-07) Ertürk Vakur B.; Rojas, R. G.
A space-domain represention for the surface fields excited by an elementary current source was discussed. Green's function was used and an approximation was made using Fourier series (FS), where FS coefficients were calculated using numerical integration. The integrals were evaluated numerically along the real axis using a Gausian quadrature algorithm. However, the developed scheme yielded field expressions that remain valid along the paraxial region for arbitraily small and large separation between observation and source points.
Open Access
Quantum dots on vertically aligned gold nanorod monolayer: plasmon enhanced fluorescence
(Royal Society of Chemistry, 2014) Peng, B.; Li, Z.; Mutlugun, E.; Martinez, P. L. H.; Li, D.; Zhang, Q.; Gao, Y.; Demir, Hilmi Volkan; Xiong, Q.
CTAB-coated Au nanorods were directly self-assembled into a vertically aligned monolayer with highly uniform hot spots through a simple but robust approach. By coupling with CdSe/ZnS quantum dots, a maximum enhancement of 10.4 is achieved due to: increased excitation transition rate, radiative rate, and coupling efficiency of emission to the far field.
Open Access
Silicon nanowire network metal-semiconductor-metal photodetectors
(AIP Publishing LLC., 2013-08-23) Mulazimoglu, E.; Coskun, S.; Gunoven, M.; Butun, B.; Özbay, Ekmel; Turan, R.; Unalan, H. E.
We report on the fabrication and characterization of solution-processed, highly flexible, silicon nanowire network based metal-semiconductor-metal photodetectors. Both the active part of the device and the electrodes are made of nanowire networks that provide both flexibility and transparency. Fabricated photodetectors showed a fast dynamic response, 0.43 ms for the rise and 0.58 ms for the fall-time, with a decent on/off ratio of 20. The effect of nanowire-density on transmittance and light on/off behavior were both investigated. Flexible photodetectors, on the other hand, were fabricated on polyethyleneterephthalate substrates and showed similar photodetector characteristics upon bending down to a radius of 1 cm.
Open Access
Superenhancers: Novel opportunities for nanowire optoelectronics
(Nature Publishing Group, 2014) Khudiyev, T.; Bayındır, Mehmet
Nanowires play a crucial role in the development of new generation optoelectronic devices ranging from photovoltaics to photodetectors, as these designs capitalize on the low material usage, utilize leaky-mode optical resonances and possess high conversion efficiencies associated with nanowire geometry. However, their current schemes lack sufficient absorption capacity demanded for their practical applicability, and more efficient materials cannot find widespread usage in these designs due to their rarity and cost. Here we suggest a novel and versatile nanoconcentrator scheme utilizing unique optical features of non-resonant Mie (NRM) scattering regime associated with low-index structures. The scattering regime is highly compatible with resonant Mie absorption effect taking place in nanowire absorbers. This technique in its optimized forms can provide up to 1500% total absorption enhancement, 400-fold material save and is suitable for large-area applications with significant area preservation compared to thin-film of same materials. Proposed superenhancer concept with its exceptional features such as broadband absorption enhancement, polarization immunity and material-independent manner paves the way for development of efficient nanowire photosensors or solar thermophotovoltaic devices and presents novel design opportunities for self-powered nanosystems.
Open Access
Tailoring self-organized nanostructured morphologies in kilometer-long polymer fiber
(Nature Publishing Group, 2014-05-06) Khudiyev, T.; Tobail, O.; Bayındır, Mehmet
While nanowires and nanospheres have been utilized in the design of a diverse array of nanoscale devices, recent schemes frequently require nanoscale architectures of higher complexity. However, conventional techniques are largely unsatisfactory for the production of more intricate nanoscale shapes and patterns, and even successful fabrication methods are incompatible with large-scale production efforts. Novel top-down, iterative size reduction (ISR)-mediated approaches have recently been shown to be promising for the production of high-throughput cylindrical and spherical nanostructures, though more complex architectures have yet to be created using this process. Here we report the presence of a hitherto-undescribed transitory region between nanowire and nanosphere transformation, where a diverse array of complex quasi one-dimensional nanostructures is produced by Rayleigh-Plateau instability-mediated deformation during the progress of a combined ISR/thermal instability technique. Temperature-based tailoring of architecturally diverse, indefinitely long, globally parallel, complex nanostructure arrays with high uniformity and low size variation facilitates the development of in-fiber or free-standing nanodevices with significant advantages over on-chip devices.
Open Access
VLSI circuits for adaptive digital beamforming in ultrasound imaging
(IEEE, 1993) Karaman, M.; Atalar, Abdullah; Köymen, Hayrettin
For phased-array ultrasound imaging, alternative beamforming techniques and their VLSI circuits are studied to form a fully digital receive front-end hardware. In order to increase the timing accuracy in beamforming, a computationally efficient interpolation scheme to increase the sampling rate is examined. For adaptive beamforming, a phase aberration correction method with very low computational complexity is described. Image quality performance of the method is examined by processing the non-aberrated and aberrated phased-array experimental data sets of an ultrasound resolution phantom. A digital beamforming scheme based on receive focusing at the raster focal points is examined. The sector images of the resolution phantom, reconstructed from the phased-array experimental data by beamforming at the radial and raster focal points, are presented for comparison of the image resolution performances of the two beamforming schemes. VLSI circuits and their implementations for the proposed techniques are presented.