Browsing by Author "Tiam Tan, S."

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    A bright cadmium-free, hybrid organic/quantum dot white light-emitting diode
    (American Institute of Physics, 2012-12-06) Yang, X.; Divayana, Y.; Zhao, D.; Swee Leck, K.; Lu, F.; Tiam Tan, S.; Putu Abiyasa, A.; Zhao Y.; Demir, Hilmi Volkan; Wei Sun, X.
    We report a bright cadmium-free, InP-based quantum dot light-emitting diode (QD-LED) with efficient green emission. A maximum brightness close to 700 cd/m2 together with a relatively low turn-on voltage of 4.5 V has been achieved. With the design of a loosely packed QD layer resulting in the direct contact of poly[N,N′-bis(4-butylphenyl)-N,N′-bis(phenyl) benzidine] (poly-TPD) and 2,2′,2″-(1,3,5-benzinetriyl)-tris(1- phenyl-1-H-benzimidazole) (TPBi) in the device, a ternary complementary white QD-LED consisting of blue component (poly-TPD), green component (QDs), and red component (exciplex formed at the interface between poly-TPD and TPBi) has been demonstrated. The resulting white QD-LED shows an excellent color rendering index of 95.
  • Thumbnail Image
    ItemOpen Access
    P-doping-free InGaN/GaN light-emitting diode driven by three-dimensional hole gas
    (2013) Zhang, Z.-H.; Tiam Tan, S.; Kyaw, Z.; Liu W.; Ji, Y.; Ju, Z.; Zhang X.; Wei Sun X.; Volkan Demir H.
    Here, GaN/AlxGa1-xN heterostructures with a graded AlN composition, completely lacking external p-doping, are designed and grown using metal-organic-chemical-vapour deposition (MOCVD) system to realize three-dimensional hole gas (3DHG). The existence of the 3DHG is confirmed by capacitance-voltage measurements. Based on this design, a p-doping-free InGaN/GaN light-emitting diode (LED) driven by the 3DHG is proposed and grown using MOCVD. The electroluminescence, which is attributed to the radiative recombination of injected electrons and holes in InGaN/GaN quantum wells, is observed from the fabricated p-doping-free devices. These results suggest that the 3DHG can be an alternative hole source for InGaN/GaN LEDs besides common Mg dopants. © 2013 AIP Publishing LLC.
  • Thumbnail Image
    ItemOpen Access
    Room-temperature larger-scale highly ordered nanorod imprints of ZnO film
    (Optical Society of American (OSA), 2013) Kyaw, Z.; Wang J.; Dev, K.; Tiam Tan, S.; Ju, Z.; Zhang, Z.-H.; Ji, Y.; Hasanov, N.; Liu W.; Sun X.W.; Demir, Hilmi Volkan
    Room-temperature large-scale highly ordered nanorod-patterned ZnO films directly integrated on III-nitride light-emitting diodes (LEDs) are proposed and demonstrated via low-cost modified nanoimprinting, avoiding a high-temperature process. with a 600 nm pitch on top of a critical 200 nm thick Imprinting ZnO nanorods of 200 nm in diameter and 200 nm in height continuous ZnO wetting layer, the light output power of the resulting integrated ZnO-nanorod-film/semi- transparent metal/GaN/InGaN LED shows a two-fold enhancement (100% light extraction efficiency improvement) at the injection current of 150 mA, in comparison with the conventional LED without the imprint film. The increased optical output is well explained by the enhanced light scattering and outcoupling of the ZnOrod structures along with the wetting film, as verified by the numerical simulations. The wetting layer is found to be essential for better impedance matching. The current-voltage characteristics and electroluminescence measurements confirm that there is no noticeable change in the electrical or spectral properties of the final LEDs after ZnO-nanorod film integration. These results suggest that the low-cost high-quality large-scale ZnOnanorod imprints hold great promise for superior LED light extraction. ©2013 Optical Society of America.