CMUT array element in deep-collapse mode

buir.contributor.authorAtalar, Abdullah
buir.contributor.authorKöymen, Hayrettin
buir.contributor.orcidAtalar, Abdullah|0000-0002-1903-1240
dc.citation.epage111en_US
dc.citation.spage108en_US
dc.contributor.authorOlcum, Semihen_US
dc.contributor.authorYamaner F.Y.en_US
dc.contributor.authorBozkurt, A.en_US
dc.contributor.authorKöymen, Hayrettinen_US
dc.contributor.authorAtalar, Abdullahen_US
dc.coverage.spatialOrlando, FL, USAen_US
dc.date.accessioned2016-02-08T12:17:01Z
dc.date.available2016-02-08T12:17:01Z
dc.date.issued2011en_US
dc.departmentDepartment of Electrical and Electronics Engineeringen_US
dc.descriptionDate of Conference: 18-21 Oct. 2011en_US
dc.description.abstractCollapse and deep-collapse mode of operations have boosted the pressure outputs of capacitive micromachined ultrasonic transducers (CMUTs) considerably. In this work, we demonstrate a CMUT element operating in the deep-collapse mode with 25 V pulse excitation and without the effects of charge trapping. The fabricated CMUT element consists of 4 by 4 circular cells with 20 μm radius and 1 μm thick plates suspended over a 50 nm cavity. The overall size of the element is 0.190 mm by 0.19 mm. The collapse voltage of the plates is measured to be approximately 3V. By driving the CMUTs with 25V pulses in the deep-collapse mode without any bias, we achieved 1.2 MPa peak-to-peak pressure output on the surface of the CMUT element with a center frequency of 9 MHz and 100% fractional bandwidth. We applied 1000 consecutive electrical pulses with alternating polarity to the element and witnessed no change in the transmitted acoustic pulse. © 2011 IEEE.en_US
dc.description.provenanceMade available in DSpace on 2016-02-08T12:17:01Z (GMT). No. of bitstreams: 1 bilkent-research-paper.pdf: 70227 bytes, checksum: 26e812c6f5156f83f0e77b261a471b5a (MD5) Previous issue date: 2011en
dc.identifier.doi10.1109/ULTSYM.2011.0027en_US
dc.identifier.issn1948-5719
dc.identifier.urihttp://hdl.handle.net/11693/28307
dc.language.isoEnglishen_US
dc.publisherIEEEen_US
dc.relation.isversionofhttp://dx.doi.org/10.1109/ULTSYM.2011.0027en_US
dc.source.title2011 IEEE International Ultrasonics Symposiumen_US
dc.subjectA-centeren_US
dc.subjectAcoustic pulseen_US
dc.subjectAlternating polarityen_US
dc.subjectArray elementsen_US
dc.subjectCapacitive micromachined ultrasonic transduceren_US
dc.subjectCollapse voltageen_US
dc.subjectElectrical pulseen_US
dc.subjectFractional bandwidthsen_US
dc.subjectMode of operationsen_US
dc.subjectPeak-to-peaken_US
dc.subjectPulse excitationen_US
dc.subjectThick plateen_US
dc.subjectUltrasonic transducersen_US
dc.subjectCollapsible tubesen_US
dc.titleCMUT array element in deep-collapse modeen_US
dc.typeConference Paperen_US

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
CMUT array element in deep-collapse mode.pdf
Size:
1.4 MB
Format:
Adobe Portable Document Format
Description:
Full printable version