Experimental evaluation of polycrystalline diamond tool geometries while drilling carbon fiber-reinforced plastics
dc.citation.epage | 1307 | en_US |
dc.citation.issueNumber | 5-8 | en_US |
dc.citation.spage | 1295 | en_US |
dc.citation.volumeNumber | 71 | en_US |
dc.contributor.author | Karpat, Y. | en_US |
dc.contributor.author | Deǧer, B. | en_US |
dc.contributor.author | Bahtiyar, O. | en_US |
dc.date.accessioned | 2016-02-08T10:58:05Z | |
dc.date.available | 2016-02-08T10:58:05Z | |
dc.date.issued | 2014 | en_US |
dc.department | Department of Industrial Engineering | en_US |
dc.description.abstract | Polycrystalline diamond (PCD) drills are commonly employed in carbon fiber-reinforced plastic (CFRP) drilling to satisfy hole quality conditions with an acceptable tool life and productivity. Despite their common use in industry, only a small number of studies have been reported on drilling CFRPs with PCD drills. In this study, drilling performances of three different PCD drill designs are investigated experimentally using thrust force, torque, and hole exit quality measurements. Results show that work material properties, drilling conditions, and drill design should all be considered together during the selection of process parameters, and the relationships among these factors are quite complex. | en_US |
dc.identifier.doi | 10.1007/s00170-013-5592-7 | en_US |
dc.identifier.eissn | 1433-3015 | |
dc.identifier.issn | 0268-3768 | |
dc.identifier.uri | http://hdl.handle.net/11693/26312 | |
dc.language.iso | English | en_US |
dc.publisher | Springer | en_US |
dc.relation.isversionof | http://dx.doi.org/10.1007/s00170-013-5592-7 | en_US |
dc.source.title | International Journal of Advanced Manufacturing Technology | en_US |
dc.subject | Carbon fiber-reinforced plastics | en_US |
dc.subject | Drilling | en_US |
dc.subject | Polycrystalline diamond | en_US |
dc.subject | Drilling performance | en_US |
dc.subject | Exit qualities | en_US |
dc.subject | Experimental evaluation | en_US |
dc.subject | Polycrystalline diamond tools | en_US |
dc.subject | Selection of process parameters | en_US |
dc.subject | Thrust forces | en_US |
dc.subject | While drillings | en_US |
dc.subject | Fiber reinforced plastics | en_US |
dc.subject | Oil well drilling | en_US |
dc.title | Experimental evaluation of polycrystalline diamond tool geometries while drilling carbon fiber-reinforced plastics | en_US |
dc.type | Article | en_US |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Experimental evaluation of polycrystalline diamond tool geometries while drilling carbon fiber-reinforced plastics.pdf
- Size:
- 12.57 MB
- Format:
- Adobe Portable Document Format
- Description:
- Full printable version