Browsing by Subject "White LED"

Filter results by typing the first few letters
Now showing 1 - 5 of 5
  • Thumbnail Image
    ItemOpen Access
    Implementation of high-quality warm-white light-emitting diodes by a model-experimental feedback approach using quantum dot-salt mixed crystals
    (American Chemical Society, 2015) Adam, M.; Erdem, T.; Stachowski, G.M.; Soran-Erdem Z.; Lox, J. F. L.; Bauer, C.; Poppe, J.; Demir, Hilmi Volkan; Gaponik N.; Eychmüller A.
    In this work, a model-experimental feedback approach is developed and applied to fabricate high-quality, warm-white light-emitting diodes based on quantum dots (QDs) as color-conversion materials. Owing to their unique chemical and physical properties, QDs offer huge potential for lighting applications. Nevertheless, both emission stability and processability of the QDs are limited upon usage from solution. Incorporating them into a solid ionic matrix overcomes both of these drawbacks, while preserving the initial optical properties. Here borax (Na2B4O7·10H2O) is used as a host matrix because of its lower solubility and thereby reduced ionic strength in water in comparison with NaCl. This guarantees the stability of high-quality CdSe/ZnS QDs in the aqueous phase during crystallization and results in a 3.4 times higher loading amount of QDs within the borax crystals compared to NaCl. All steps from the synthesis via mixed crystal preparation to the warm-white LED preparation are verified by applying the model-experimental feedback, in which experimental data and numerical results provide feedback to each other recursively. These measures are taken to ensure a high luminous efficacy of optical radiation (LER) and a high color rendering index (CRI) of the final device as well as a correlated color temperature (CCT) comparable to an incandescent bulb. By doing so, a warm-white LED with a LER of 341 lm/Wopt, a CCT of 2720 K and a CRI of 91.1 is produced. Finally, we show that the emission stability of the QDs within the borax crystals on LEDs driven at high currents is significantly improved. These findings indicate that the proposed warm-white light-emitting diodes based on QDs-in-borax hold great promise for quality lighting. © 2015 American Chemical Society.
  • Thumbnail Image
    ItemOpen Access
    Multiplexed patterning of cesium lead halide perovskite nanocrystals by additive jet printing for efficient white light generation
    (Elsevier, 2020-08-12) Altıntaş, Y.; Torun, İ.; Yazıcı, A. F.; Beşkazak, E.; Erdem, T.; Önses, M. Serdar
    Inorganic perovskite nanocrystals (PNCs) offer the ability to precisely but also flexibly control the peak emission wavelength while also possessing narrow-band emission spectra and high quantum yields. Owing to these features, PNCs have been already employed as color converters on LEDs. Nevertheless, the anion exchange reactions that prevent the blending of perovskites of different colors remain as an important bottleneck. As a remedy to this issue, here we employ additive jet printing to form separated stripes of these nanocrystals. Within this framework, we first present the synthesis of CsPbBr3 and CsPbBrxI3−x nanocrystals spanning the whole visible regime and optimize the cleaning procedure to obtain PNCs possessing photoluminescence quantum yields as high as 91% and emission linewidths as narrow as 15 nm, making them suitable for high quality white light generation. Next, we employ electrohydrodynamic jet printing to form closely spaced stripes of PNCs of various colors and integrated these films with a blue LED to create a white LED. Our proof-of-concept LED achieves high photometric performance as it possesses a color rendering index of 91.3, luminous efficacy of optical radiation > 300 lm/Wopt, and correlated color temperature of ca. 7000 K. We believe that additive jet printing technique will pave the way for a ubiquitous use of these PNCs in light-emitting devices in the near future.
  • Thumbnail Image
    ItemOpen Access
    Warm-white light-emitting diodes integrated with colloidal quantum dots for high luminous efficacy and color rendering
    (2010) Nizamoglu, S.; Erdem, T.; Sun X.W.; Demir, Hilmi Volkan
    Warm-white LEDs (WLEDs) with high spectral quality and efficiency are required for lighting applications, but current experimental performances are limited. We report on nanocrystal quantum dot (NQD) hybridized WLEDs with high performance that exhibit a high luminous efficacy of optical radiation exceeding 350 lm/Wopt and a high color rendering index close to 90 at a low correlated color temperature <3000 K. These spectrally engineered WLEDs are obtained using a combination of CdSe/ZnS core/shell NQD nanophosphors integrated on blue InGaN/GaN LEDs. © 2010 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    Warm-White light-Emitting diodes integrated with colloidal quantum dots for high luminous efficacy and color rendering: Reply to comment
    (2011) Nizamoglu, S.; Erdem, T.; Sun X.W.; Demir, Hilmi Volkan
    The correlated color temperatures and the corresponding color rendering indices calculated using actual experimental data (and not any prediction) in the original Letter [Opt. Lett. 35, 3372 (2010)] are correct. In addition, here the color rendering of our white LEDs integrated with nanocrystal quantum dots (NQDs) is provided for all test samples. Also, a new NQD-LED design with both high luminous efficacy of optical radiation and CRI is presented to have a chromaticity point in the quadrangle stated in the comment Letter [Opt. Lett. 36, 2851 (2011)]. The points made in the original Letter and all the calculation results provided therein are valid. © 2011 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    Wavelength dependent color conversion of CdSe/ZnS core/shell nanocrystals for white LEDs
    (IEEE, 2009) Nizamoğlu, Sedat; Demir, Hilmi Volkan
    Nanocrystals (NCs) provide narrow emission spectrum that can be conveniently tuned using quantum size effect. This ability to adjust and control emission spectrum of NCs makes them strong candidates for use in white color conversion light emitting diodes. For example, they are possibly be used for solid state lighting applications including indoor lighting, architectural lighting and scotopic street lighting, where spectrally tuned color conversion is necessary. In device research CdSe/ZnS core/shell nanocrystals are the most commonly used ones because of their good electronic isolation coming from ZnS shells and the resulting high quantum efficiency (QE) (i.e., >50% in solution) [1]. However, when these nanocrystals are integrated into the solid film, e.g., for white light generation, their in-film QE undesirably drops (despite their high QE in solution). Hence, this adversely affects the overall efficiency of the integrating devices that incorporate these NCs [2]. There have been various studies to understand the in-film optical properties of CdSe/ZnS core/shell NCs [3-5]. However, their spectrally resolved in-film quantum efficiency (i.e., the ratio of the number of photons emitted by the nanocrystal film to the number of photons absorbed in the nanocrystal film) and their photon conversion efficiency (i.e., the ratio of the number of photons emitted by the nanocrystal film to the number of photons incident to the nanocrystal film) have not been investigated in these previous studies. © 2009 IEEE.