Browsing by Subject "Wave-guides"

Now showing 1 - 6 of 6

Open Access
Attractive versus repulsive excitonic interactions of colloidal quantum dots control blue-to red-shifting (and non-shifting) amplified spontaneous emission
(American Chemical Society, 2013-11-21) Cihan, A. F.; Kelestemur, Y.; Guzelturk, B.; Yerli, O.; Kurum, U.; Yaglioglu, H. G.; Elmali, A.; Demir, Hilmi Volkan
Tunable, high-performance, two-photon absorption (TPA)-based amplified spontaneous emission (ASE) from near-unity quantum efficiency colloidal quantum dots (CQDs) is reported. Besides the absolute spectral tuning of ASE, the relative spectral tuning of ASE peak with respect to spontaneous emission was shown through engineering excitonic interactions in quasi-type-II CdSe/CdS core/shell CQDs. With core shell size adjustments, it was revealed that Coulombic exciton-exciton interactions can be tuned to be attractive (type-I-like) or repulsive (type-II-like) leading to red- or blue-shifted ASE peak, respectively, and that nonshifting ASE can be achieved with the right core shell combinations. The possibility of obtaining ASE at a specific wavelength from both type-I-like and type-II-like CQDs was also demonstrated. The experimental observations were supported by parametric quantum-mechanical modeling, shedding light on the type-tunability. These excitonically engineered CQD-solids exhibited TPA-based ASE threshold as low as 6.5 mJ/cm(2) under 800 nm excitation, displaying one of the highest values of TPA cross-section of 44 660 GM.
Open Access
Enhancement and inhibition of photoluminescence in hydrogenated amorphous silicon nitride microcavities
(Optical Society of America, 1997-09-01) Serpenguzel, A.; Aydınlı, Atilla; Bek, A.
A Fabry-Perot microcavity is used for the enhancement and inhibition of photoluminescence in hydrogenated amorphous silicon nitride. The amplitude of the photoluminescence is enhanced 4 times, while its linewidth is reduced 8 times with respect to the bulk hydrogenated amorphous silicon nitride. The transmittance, reflectance, and absorptance spectra of the microcavity were also measured and calculated. The calculated spectra agree well with the experimental ones. (C) 1997 Optical Society of America
Open Access
Ferroelectric Based Photonic Crystal Cavity by Liquid Crystal Infiltration
(Taylor & Francis, 2014) Karaomerlioglu, F.; Simsek S.; Mamedov, A. M.; Özbay, Ekmel
A novel type of two-dimensional photonic crystal is investigated for it optical properties as a core-shell-type ferroelectric nanorod infiltrated with nematic liquid crystals. Using the plane wave expansion method and finite-difference time-domain method, the photonic crystal structure, which is composed of a photonic crystal in a core-shell-type ferroelectric nanorod, is designed for the square lattice and the hexagonal lattice. It has been used 5CB as a photonic crystal core, and LiNbO3 as a ferroelectric material. The photonic crystal with a core-shell-type LiNbO3 nanorod infiltrated with nematic liquid crystals is compared with the photonic crystal with solid LiNbO3 rods and the photonic crystal with hollow LiNbO3 rods.
Open Access
Large and dynamical tuning of a chalcogenide Fabry-Perot cavity mode by temperature modulation
(Optical Society of America, 2010) Yaman, M.; Kondakci, H. E.; Bayındır, Mehmet
Te-enriched chalcogenide glass Ge15As25Se15Te45 (GAST) is synthesized, thermo-optically characterized and used to fabricate a one dimensional photonic crystal cavity mode that is dynamically and reversibly tuned by temperature modulation. The optical cavity mode is designed using GAST and As2S3 glasses after fully determining their temperature dependence of the complex refractive indices in the visible and near infrared spectrum using spectroscopic ellipsometry. By making use of the very large thermo-optic coefficient (dn/dT = 4x10(-4)/degrees C) of GAST glass at 1.2 mu m, the cavity mode of the multilayer was tuned reversibly more than 16 nm, which is, to the best of our knowledge, an order of magnitude larger for this kind of cavity modulation. Wide and dynamical spectral tuning of low bandgap chalcogenide glasses via temperature modulation can be utilized in photonic crystal based integrated optics, quantum dot resonance matching, solid state and gas laser components, and infrared photonic crystal fibers. (C) 2010 Optical Society of America
Open Access
Photonic bandgap narrowing in conical hollow core Bragg fibers
(AIP Publishing, 2014) Ozturk, F. E.; Yildirim, A.; Kanik, M.; Bayındır, Mehmet
We report the photonic bandgap engineering of Bragg fibers by controlling the thickness profile of the fiber during the thermal drawing. Conical hollow core Bragg fibers were produced by thermal drawing under a rapidly alternating load, which was applied by introducing steep changes to the fiber drawing speed. In conventional cylindrical Bragg fibers, light is guided by omnidirectional reflections from interior dielectric mirrors with a single quarter wave stack period. In conical fibers, the diameter reduction introduced a gradient of the quarter wave stack period along the length of the fiber. Therefore, the light guided within the fiber encountered slightly smaller dielectric layer thicknesses at each reflection, resulting in a progressive blueshift of the reflectance spectrum. As the reflectance spectrum shifts, longer wavelengths of the initial bandgap cease to be omnidirectionally reflected and exit through the cladding, which narrows the photonic bandgap. A narrow transmission bandwidth is particularly desirable in hollow waveguide mid-infrared sensing schemes, where broadband light is coupled to the fiber and the analyte vapor is introduced into the hollow core to measure infrared absorption. We carried out sensing simulations using the absorption spectrum of isopropyl alcohol vapor to demonstrate the importance of narrow bandgap fibers in chemical sensing applications.
Open Access
Ultralow threshold one-photon-and two-photon-pumped optical gain media of blue-emitting colloidal quantum dot films
(American Chemical Society, 2014) Guzelturk, B.; Kelestemur, Y.; Akgul, M. Z.; Sharma, V. K.; Demir, Hilmi Volkan
Colloidal quantum dots (QDs) offer advantageous properties as an optical gain media for lasers. Optical gain in the QDs has been shown in the whole visible spectrum, yet it has been intrinsically challenging to realize efficient amplified spontaneous emission (ASE) and lasing in the blue region of the visible spectrum. Here, we synthesize large-sized core/gradient shell CdZnS/ZnS QDs as an efficient optical gain media in the blue spectral range. In this Letter, we demonstrate for the first time that two-photon-absorption-pumped ASE from the blue-emitting QD is achievable with a threshold as low as 6 mJ/cm(2). Utilizing these QDs, we also report one-photon-absorption-pumped ASE at an ultralow threshold of similar to 60 mu J/cm(2), which is comparable to the state-of-the-art red-emitting QD-based gain media. This one-photon-pumped ASE threshold is an order of magnitude better than that of the previously reported best blue-emitting QD-based gain media.