Browsing by Subject "Water absorption"

Now showing 1 - 3 of 3

Unknown
Burst-mode thulium all-fiber laser delivering femtosecond pulses at a 1 GHz intra-burst repetition rate
(Optical Society of America, 2017) Elahı, P.; Kalaycıoğlu, H.; Akçaalan, Ö.; Şenel, Ç.; Ilday, F. Ö.
We report on the development of, to the best of our knowledge, the first ultrafast burst-mode laser system operating at a central wavelength of approximately 2 μm, where water absorption and, consequently, the absorption of most biological tissue is very high. The laser comprises a harmonically mode-locked 1-GHz oscillator, which, in turn, seeds a fiber amplifier chain. The amplifier produces 500 ns long bursts containing 500 pulses with 1 GHz intra-burst and 50 kHz inter-burst repetition rates, respectively, at an average power of 1 W, corresponding to 40 nJ pulse and 20 μJ burst energies, respectively. The entire system is built in an all-fiber architecture and implements dispersion management such that output pulses are delivered directly from a single-mode fiber with a duration of 340 fs without requiring any external compression. This gigahertz-repetition-rate system is intended for ablation-cooled laser material removal in the 2 μm wavelength region, which is interesting for laser surgery due to the exceptionally high tissue absorption at this wavelength.
Unknown
Thin film MoS2 nanocrystal based ultraviolet photodetector
(Optical Society of American (OSA), 2012) Alkis, S.; Öztaş, T.; Aygün L.E.; Bozkurt F.; Okyay, Ali Kemal; Ortaç, B.
We report on the development of UV range photodetector based on molybdenum disulfide nanocrystals (MoS2-NCs). The inorganic MoS2- NCs are produced by pulsed laser ablation technique in deionized water and the colloidal MoS2-NCs are characterized by transmission electron microscopy, Raman spectroscopy, X-ray diffraction and UV/VIS absorption measurements. The photoresponse studies indicate that the fabricated MoS 2- NCs photodetector (MoS2-NCs PD) operates well within 300-400 nm UV range, with diminishing response at visible wavelengths, due to the MoS2- NCs absorption characteristics. The structural and the optical properties of laser generated MoS2-NCs suggest promising applications in the field of photonics and optoelectronics. © 2012 Optical Society of America.
Unknown
Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent
(Universidad del Bio-Bio, 2023-05-02) Yılmazer, Semiha; Aras, U.; Kalaycıoğlu, H.; Temiz, A.
In this study, the purpose was to improve outdoor performance of cement bonded wood composite due to their biodegradation and sensitivity to moisture especially in warm and humid climates. Cement bonded wood composites were treated with different concentrations (10 %, 25 %, 50 %, 75 % and 100 %) of water repellent. Water repellent used was an organo-silicon based, nano-sized, eco-friendly, water-based agents. Dipping and pressure systems were applied for composite treatment. Water absorption, thickness swelling, accelerated weathering, color changes and mechanical properties after accelerated weathering were determined for treated and untreated cement-bonded composites. Results showed that treatment of composites with water repellent provided a transparent layer on composite surface. Thus, lower water absorption and thickness swelling results in the beginning of immersion in water. Treated and untreated composites were exposed to an accelerated weathering test for 350 h. Their mechanical strength including modulus of rupture, modulus of elasticity and internal bonding properties were decreased after 350 h of weathering. However, overall results after weathering test showed that all panels’ mechanical properties provided minimum modulus of rupture, modulus of elasticity and internal bonding requirements of the EN standards. © 2023, Maderas: Ciencia y Tecnologia. All Rights Reserved.