Browsing by Subject "Unit cells"

Now showing 1 - 10 of 10

Open Access
Asymmetric light propagation in chirped photonic crystal waveguides
(Optical Society of American (OSA), 2012) Kurt H.; Yilmaz, D.; Akosman, A.E.; Özbay, Ekmel
We report numerical and experimental investigations of asymmetric light propagation in a newly designed photonic structure that is formed by creating a chirped photonic crystal (PC) waveguide. The use of a non-symmetric distribution of unit cells of PC ensures the obtaining of asymmetric light propagation. Properly designing the spatial modulation of a PC waveguide inherently modifies the band structure. That in turn induces asymmetry for the light's followed path. The investigation of the transmission characteristics of this structure reveals optical diode like transmission behavior. The amount of power collected at the output of the waveguide centerline is different for the forward and backward propagation directions in the designed configuration. The advantageous properties of the proposed approach are the linear optic concept, compact configuration and compatibility with the integrated photonics. These features are expected to hold great potential for implementing practical optical rectifier-type devices. © 2012 Optical Society of America.
Unknown
Computational analysis of complicated metamaterial structures using MLFMA and nested preconditioners
(IEEE, 2007-11) Ergül, Özgür; Malas, Tahir; Yavuz, Ç; Ünal, Alper; Gürel, Levent
We consider accurate solution of scattering problems involving complicated metamaterial (MM) structures consisting of thin wires and split-ring resonators. The scattering problems are formulated by the electric-field integral equation (EFIE) discretized with the Rao-Wilton- Glisson basis functions defined on planar triangles. The resulting dense matrix equations are solved iteratively, where the matrix-vector multiplications that are required by the iterative solvers are accelerated with the multilevel fast multipole algorithm (MLFMA). Since EFIE usually produces matrix equations that are ill-conditioned and difficult to solve iteratively, we employ nested preconditioners to achieve rapid convergence of the iterative solutions. To further accelerate the simulations, we parallelize our algorithm and perform the solutions on a cluster of personal computers. This way, we are able to solve problems of MMs involving thousands of unit cells.
Unknown
Efficient solutions of metamaterial problems using a low-frequency multilevel fast multipole algorithm
(2010) Ergül, Özgür; Gürel, Levent
We present fast and accurate solutions of electromagnetics problems involving realistic metamaterial structures using a lowfrequency multilevel fast multipole algorithm (LF-MLFMA). Accelerating iterative solutions using robust preconditioning techniques may not be sufficient to reduce the overall processing time when the ordinary high-frequency MLFMA is applied to metamaterial problems. The major bottleneck, i.e., the low-frequency breakdown, should be eliminated for efficient solutions. We show that the combination of an LF-MLFMA implementation based on the multipole expansion with the sparse-approximate-inverse preconditioner enables efficient and accurate analysis of realistic metamaterial structures. Using the robust LF-MLFMA implementation, we demonstrate how the transmission properties of metamaterial walls can be enhanced with randomlyoriented unit cells.
Unknown
Experimental verification of metamaterial based subwavelength microwave absorbers
(American Institute of Physics, 2010-10-29) Alici, K. B.; Bilotti, F.; Vegni, L.; Özbay, Ekmel
We designed, implemented, and experimentally characterized electrically thin microwave absorbers by using the metamaterial concept. The absorbers consist of (i) a metal back plate and an artificial magnetic material layer; (ii) metamaterial back plate and a resistive sheet layer. We investigated absorber performance in terms of absorbance, fractional bandwidth, and electrical thickness, all of which depend on the dimensions of the metamaterial unit cell and the distance between the back plate and metamaterial layer. As a proof of concept, we demonstrated a λ/4.7 thick absorber of type I, with a 99.8% absorption peak along with a 8% fractional bandwidth. We have shown that as the electrical size of the metamaterial unit cell decreases, the absorber electrical thickness can further be reduced. We investigated this concept by using two different magnetic metamaterial inclusions: the split-ring resonator (SRR) and multiple SSR (MSRR). We have also demonstrated experimentally a λ/4.7 and a λ/4.2 thick absorbers of type II, based on SRR and MSRR magnetic metamaterial back plates, respectively. The absorption peak of the SRR layout is 97.4%, while for the MSRR one the absorption peak is 98.4%. The 10 dB bandwidths were 9.9% and 9.6% for the SRR and MSRR cases, respectively.
Unknown
Fast and accurate analysis of large metamaterial structures using the multilevel fast multipole algorithm
(2009) Gürel, Levent; Ergül, Özgür; Ünal, A.; Malas, T.
We report fast and accurate simulations of metamaterial structures constructed with large numbers of unit cells containing split-ring resonators and thin wires. Scattering problems involving various metamaterial walls are formulated rigorously using the electric-field integral equation, discretized with the Rao-Wilton-Glisson basis functions. Resulting dense matrix equations are solved iteratively, where the matrix-vector multiplications are performed efficiently with the multilevel fast multipole algorithm. For rapid solutions at resonance frequencies, convergence of the iterations is accelerated by using robust preconditioning techniques, such as the sparse-approximate-inverse preconditioner. Without resorting to homogenization approximations and periodicity assumptions, we are able to obtain accurate solutions of realistic metamaterial problems discretized with millions of unknowns.
Unknown
MLFMA solutions of transmission problems Involving realistic metamaterial walls
(IEEE, 2007-08) Ergül, Özgür; Ünal, Alper; Gürel, Levent
We present the solution of multilayer metamaterial (MM) structures containing large numbers of unit cells, such as split-ring resonators. Integral-equation formulations of scattering problems are solved iteratively by employing a parallel implementation of the multilevel fast multipole algorithm. Due to ill-conditioned nature of the problems, advanced preconditioning techniques are used to obtain rapid convergence in the iterative solutions. By constructing a sophisticated simulation environment, we accurately and efficiently investigate large and complicated MM structures. © 2007 IEEE.
Unknown
Raman enhancement on a broadband meta-surface
(American Chemical Society, 2012-07-30) Ayas S.; Güner, H.; Türker, B.; Ekiz, O. O.; Dirisaglik, F.; Okyay, Ali Kemal; Dâna, A.
Plasmonic metamaterials allow confinement of light to deep subwavelength dimensions, while allowing for the tailoring of dispersion and electromagnetic mode density to enhance specific photonic properties. Optical resonances of plasmonic molecules have been extensively investigated; however, benefits of strong coupling of dimers have been overlooked. Here, we construct a plasmonic meta-surface through coupling of diatomic plasmonic molecules which contain a heavy and light meta-atom. Presence and coupling of two distinct types of localized modes in the plasmonic molecule allow formation and engineering of a rich band structure in a seemingly simple and common geometry, resulting in a broadband and quasi-omni-directional meta-surface. Surface-enhanced Raman scattering benefits from the simultaneous presence of plasmonic resonances at the excitation and scattering frequencies, and by proper design of the band structure to satisfy this condition, highly repeatable and spatially uniform Raman enhancement is demonstrated. On the basis of calculations of the field enhancement distribution within a unit cell, spatial uniformity of the enhancement at the nanoscale is discussed. Raman scattering constitutes an example of nonlinear optical processes, where the wavelength conversion during scattering may be viewed as a photonic transition between the bands of the meta-material.
Unknown
Reconstruction of the polarization distribution of the Rice-Mele model
(American Physical Society, 2017) Yahyavi, M.; Hetényi, B.
We calculate the gauge-invariant cumulants (and moments) associated with the Zak phase in the Rice-Mele model. We reconstruct the underlying probability distribution by maximizing the information entropy and applying the moments as constraints. When the Wannier functions are localized within one unit cell, the probability distribution so obtained corresponds to that of the Wannier function. We show that in the fully dimerized limit the magnitudes of the moments are all equal. In this limit, if the on-site interaction is decreased towards zero, the distribution shifts towards the midpoint of the unit cell, but the overall shape of the distribution remains the same. Away from this limit, if alternate hoppings are finite and the on-site interaction is decreased, the distribution also shifts towards the midpoint of the unit cell, but it does this by changing shape, by becoming asymmetric around the maximum, and by shifting. We also follow the probability distribution of the polarization in cycles around the topologically nontrivial point of the model. The distribution moves across to the next unit cell, its shape distorting considerably in the process. If the radius of the cycle is large, the shift of the distribution is accompanied by large variations in the maximum.
Unknown
Role of organic and inorganic additives on the assembly of CTAB-P123 and the morphology of mesoporous silica particles
(2009) Poyraz, A. S.; Dag, Ö.
Mesoporous silica particles with various morphologies and structures have been synthesized by controlling the solubility, micellization, and assembly of a charged surfactant (cethyltrimethylammonium bromide, CTAB) and a pluronic (PEO20PPO70PEO20, P123) couple using an organic (benzene) or an inorganic (SO4 2-, NO3 -, or Cl-) additive. The effect of CTAB, with or without one of the Hofmeister ions or benzene in various concentrations, on the morphology, pore-size, pore-structure and the nature of the silica particles has been investigated. Increasing the lyotropic anion (SO4 2-) or benzene concentration of the synthesis media creates wormlike particles with enlarged pores and reduced wall thickness. However, the hydrotropic anion (NO3 -) influenced the solubility of the charged surfactant and increased the CTAB concentration in the CTAB-P123 micelles, and as a result, in the mesoporous silica particles. The surface area, unit cell, and pore size of the silica particles are diminished by increasing the nitrate ion centration. The effects of the Cl- ion are between the SO4 2- and NO3 -ions. It influenced the P123 at low and CTAB at high concentrations. At low CTAB/ P123 mol ratios, the Cl- ion affects mainly the P123, but at high CTAB/P123 it affects both the CTAB and P123. By carefully adjusting these ingredients (CTAB, SO4 2-, Cl-, NO3 - and benzene), not only the morphology of the particles, but also the pore-size and pore-structure of the mesoporous silica particles could be adjusted. The investigations were carried out by preparing a series of powder samples and, by varying the CTAB/P123 mol ratio (between 3.0 and 6.0) and the concentration of the organic (0.17 to 0.90 M) or inorganic (at 0.25, 0.50, or 1.00 M) additive in the synthesis media. The powder samples were analyzed using microscopy (SEM, TEM, and POM), diffraction (PXRD), and spectroscopy (FTIR, Raman, UV-vis, and EDS) techniques toward above goals. © 2009 American Chemical Society.
Unknown
Visible light nearly perfect absorber: an optimum unit cell arrangement for near absolute polarization insensitivity
(OSA - The Optical Society, 2017) Ghobadi, Amir; Hajian, Hodjat; Gökbayrak, Murat; Dereshgi, Sina Abedini; Toprak, Ahmet; Butun, Bayram; Özbay, Ekmel
In this work, we propose an optimum unit cell arrangement to obtain near absolute polarization insensitivity in a metal-insulator-metal (MIM) based ultra-broadband perfect absorber. Our findings prove that upon utilizing this optimum arrangement, the response of the absorber is retained and unchanged over all arbitrary incidence light polarizations, regardless of the shape of the top metal patch. First, the impact of the geometry of the top nanopatch resonators on the absorption bandwidth of the overall structure is explored. Then, the response of the MIM design for different incidence polarizations and angles is scrutinized. Finally, the proposed design is fabricated and characterized. © 2017 Optical Society of America.