Browsing by Subject "TIA"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    A transimpedance amplifier design for capacitive micromachined ultrasonic transducers operating at 7.5MHz
    (2021-01) İlhan, Giray
    Capacitive Micromachined Ultrasonic Transducers (CMUTs) are MEMS devices used in ultrasound imaging, e.g. ultrasound mammography. CMUT proved to be a viable transducer solution in ultrasound mammography without the hazardous effects of conventional X-ray mammography. The CMUTs have a very high electrical impedance, where a transimpedance amplifier (TIA) is most appropriate for preamplification during reception. A TIA with 25MHz bandwidth and 120kΩ transimpedance gain is designed on Cadence Virtuoso using XFAB XC06M3 process. The CMUT small signal model is used for 50μm radius and 7.5MHz operating frequency. This model is incorporated into TIA circuit simulations. Two design options are proposed for the TIA, one with the passive feedback resistor and the other with a MOSFET feedback resistor. The latter enabled us to save space in layout design compare to the former. Transient and noise simulations are conducted and compared for schematic and layout views. The input referred current noise of the TIA is simulated to be 0.5pA/√Hz and the power consumption is simulated to be approximately 3.3mW for both designs.
  • Thumbnail Image
    ItemOpen Access
    A transimpedance amplifier for capacitive micromachined ultrasonic transducers
    (2015-12) Kansu, Yavuz
    In this thesis a design of a CMOS transimpedance amplifier (TIA) for a capacitive micro-machined ultrasonic transducer (CMUT) is presented. CMUT’s have a high electrical impedance when used as receivers. Any capacitance between the CMUT and a high impedance amplifier will degrade the frequency response. So, we need to amplify the current rather than the voltage. This approach requires a transimpedance amplifier. The designed TIA has a 30 MHz bandwidth and 400 kΩ transimpedance gain. The total input referred current noise of the TIA is 270 fA/√Hz at 10 MHz. The noise figure of the TIA is 2.7 dB at 10 MHz when connected to the CMUT with 200 kΩ source resistance. The power consumption of the TIA is 10.5 mW and the size of the TIA layout is 133µm x 45µm. The TIA chip will be fabricated in AMS C35B4C3 (0.35µm) process.