Browsing by Subject "Strontium alloys"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Postdeposition annealing on RF-sputtered SrTiO3 thin films
    (AVS Science and Technology Society, 2017) Bayrak, T.; Kizir,S.; Kahveci, E.; Bıyıklı, N.; Goldenberg, E.
    Understanding of structural, optical, and electrical properties of thin films are very important for a reliable device performance. In the present work, the effect of postdeposition annealing on stoichiometric SrTiO3 (STO) thin films grown by radio frequency magnetron sputtering at room temperature on p-type Si (100) and quartz substrates were studied. Highly transparent and well adhered thin films were obtained in visible and near infrared regions. As-deposited films were amorphous, while nanocrystalline and polycrystalline phases of the STO thin films formed as a function of annealing temperature. Films annealed at 300 �C showed nanocrystallinity with some amorphous phase. Crystallization started after 15 min annealing at 700 �C, and further improved for films annealed at 800 �C. However, crystallinity reduced for films which were annealed at 900 �C. The optical and electrical properties of STO thin films affected by postdeposition annealing at 800 �C: Eg values decreased from 4.50 to 4.18 eV, n(λ) values (at 550 nm) increased from 1.81 to 2.16. The surface roughness increased with the annealing temperature due to the increased crystallite size, densification and following void formation which can be seen from the scanning electron microscopy images. The highest dielectric constants (46 at 100 kHz) observed for films annealed at 800 �C; however, it was lower for 300 �C annealed (25 at 100 kHz) and as-deposited (7 at 100 kHz) STO films having ∼80 nm thickness.
  • Thumbnail Image
    ItemOpen Access
    Spectral scalability and optical spectra of fractal multilayer structures: FDTD analysis
    (Springer Verlag, 2017) Şimsek, Şevket; Palaz, Selami; Mamedov, Amirullah M.; Özbay, Ekmel
    An investigation of the optical properties and band structures for the conventional and Fibonacci photonic crystals (PCs) based on SrTiO3 and Sb2Te3 is made in the present research. Here, we use one-dimensional SrTiO3- and Sb2Te3-based layers. We have theoretically calculated the photonic band structure and transmission spectra of SrTiO3- and Sb2Te3-based PC superlattices. The position of minima in the transmission spectrum correlates with the gaps obtained in the calculation. The intensity of the transmission depths is more intense in the case of higher refractive index contrast between the layers. © 2016, Springer-Verlag Berlin Heidelberg.