Browsing by Subject "Radiation effects"

Now showing 1 - 4 of 4

Open Access
Extension of forward-backward method with DFT-based acceleration algorithm for the efficient analysis of large periodic arrays with arbitrary boundaries
(John Wiley & Sons, 2005) Civi, Ö. A.; Ertürk, V. B.; Chou, H.-T.
An extension of the discrete Fourier transform (DFT)-based forward-backward algorithm is developed using the virtual-element approach to provide a fast and accurate analysis of electromagnetic radiation/scattering from electrically large, planar, periodic, finite (phased) arrays with arbitrary boundaries. Both the computational complexity and storage requirements of this approach are O(Ntot) (Ntot is the total number of unknowns). The numerical results for both printed and freestanding dipole arrays with circular and/or elliptical boundaries are presented to validate the efficiency and accuracy of this approach.
Open Access
Highly directive radiation and negative refraction using photonic crystals
(Institute of Physics Publishing, 2005) Özbay, Ekmel; Bulu, I.; Aydin, K.; Caglayan H.; Alici, K. B.; Guven, K.
In this article, we present an experimental and numerical study of certain optical properties of two-dimensional dielectric photonic crystals (PCs). By modifying the band structure of a two-dimensional photonic crystal through its crystal parameters, we show how it is possible to confine the angular distribution of radiation from an embedded omnidirectional source. We then demonstrate that the anomalous band dispersions of PCs give rise to completely novel optical phenomena, in particular, the negative refraction of electromagnetic waves at the interface of a PC. We investigate the spectral negative refraction, which utilizes a transverse magnetic (TM)-polarized upper band of a PC, in detail and show that a high degree of isotropy can be achieved for the corresponding effective index of refraction. The presence of nearly a isotropic negative refractive index leads to focusing of omnidirectional sources by a PC slab lens, which can surpass certain limitations of conventional (positive refractive) lenses. These examples indicate the potential of PCs for photonics applications utilizing the band structure.
Open Access
Radiative Dark-Bright Instability and Critical Casimir Effect in DQW Exciton Condensates
(Elsevier, 2011) Hakioglu, T.; Özgün E.
It is already well known that radiative interband interaction in the excitonic normal liquid in semiconducting double quantum wells is responsible for a negligible splitting between the energies of the dark and bright excitons enabling us to consider a four fold spin degeneracy. This has also lead many workers to naively consider the same degeneracy in studying the condensate. On the other hand, the non-perturbative aspects of this interaction in the condensed phase, e.g. its consequences on the order parameter and the dark-bright mixture in the ground state have not been explored. In this work, we demonstrate that the ground state concentrations of the dark and the bright exciton condensates are dramatically different beyond a sharp interband coupling threshold where the contribution of the bright component in the ground state vanishes. This shows that the effect of the radiative interband interaction on the condensate is nonperturbative. We also observe in the free energy a discontinuous derivative with respect to the layer separation at the entrance to the condensed phase, indicating a strong critical Casimir force. An estimate of its strength shows that it is measurable. Measuring the Casimir force is challenging, but at the same time it has a conclusive power about the presence of the long sought for condensed phase.
Open Access
Rapid and alternative fabrication method for microfluidic paper based analytical devices
(Elsevier B.V., 2016) Malekghasemi, S.; Kahveci, E.; Duman, M.
A major application of microfluidic paper-based analytical devices (µPADs) includes the field of point-of-care (POC) diagnostics. It is important for POC diagnostics to possess properties such as ease-of-use and low cost. However, µPADs need multiple instruments and fabrication steps. In this study, two different chemicals (Hexamethyldisilazane and Tetra-ethylorthosilicate) were used, and three different methods (heating, plasma treatment, and microwave irradiation) were compared to develop µPADs. Additionally, an inkjet-printing technique was used for generating a hydrophilic channel and printing certain chemical agents on different regions of a modified filter paper. A rapid and effective fabrication method to develop µPADs within 10 min was introduced using an inkjet-printing technique in conjunction with a microwave irradiation method. Environmental scanning electron microscope (ESEM) and x-ray photoelectron spectroscopy (XPS) were used for morphology characterization and determining the surface chemical compositions of the modified filter paper, respectively. Contact angle measurements were used to fulfill the hydrophobicity of the treated filter paper. The highest contact angle value (141°±1) was obtained using the microwave irradiation method over a period of 7 min, when the filter paper was modified by TEOS. Furthermore, by using this method, the XPS results of TEOS-modified filter paper revealed Si2p (23%) and Si-O bounds (81.55%) indicating the presence of Si–O–Si bridges and Si(OEt) groups, respectively. The ESEM results revealed changes in the porous structures of the papers and decreases in the pore sizes. Washburn assay measurements tested the efficiency of the generated hydrophilic channels in which similar water penetration rates were observed in the TEOS-modified filter paper and unmodified (plain) filter paper. The validation of the developed µPADs was performed by utilizing the rapid urease test as a model test system. The detection limit of the developed µPADs was measured as 1 unit ml−1 urease enzyme in detection zones within a period of 3 min. The study findings suggested that a combination of microwave irradiation with inkjet-printing technique could improve the fabrication method of µPADs, enabling faster production of µPADs that are easy to use and cost-effective with long shelf lives.