Browsing by Subject "Radiation counters"

Now showing 1 - 2 of 2

Open Access
Low cost, ultra-high throuhput particle counting using inertial microfluidics
(Chemical and Biological Microsystems Society, 2016) Çetin, Barbaros; Kaplan, H.; Durkaya, G.; Kurtuldu, H.
In this work, an ultra-high throughput microfluidic particle counting system is demonstrated. For the particle counting, a low cost custom-design optical hardware is developed. The microfluidic chip utilizes the inertial microfluidics to focus the particles in a certain location which significantly enhanced the optical signal utilized for the quantification of the number concentration. The effect of the particle focusing on the counting performance is demonstrated. The proposed system has a potential to be portable and has a capability to process 10 ml of sample within couple minutes.
Open Access
A simple approach for the fabrication of 3D microelectrodes for impedimetric sensing
(Institute of Physics Publishing, 2015) Guler, M. T.; Bilican, I.; Agan, S.; Elbuken, C.
In this paper, we present a very simple method to fabricate three-dimensional (3D) microelectrodes integrated with microfluidic devices. We form the electrodes by etching a microwire placed across a microchannel. For precise control of the electrode spacing, we employ a hydrodynamic focusing microfluidic device and control the width of the etching solution stream. The focused widths of the etchant solution and the etching time determine the gap formed between the electrodes. Using the same microfluidic device, we can fabricate integrated 3D electrodes with different electrode gaps. We have demonstrated the functionality of these electrodes using an impedimetric particle counting setup. Using 3D microelectrodes with a diameter of 25 μm, we have detected 6 μm-diameter polystyrene beads in a buffer solution as well as erythrocytes in a PBS solution. We study the effect of electrode spacing on the signal-to-noise ratio of the impedance signal and we demonstrate that the smaller the electrode spacing the higher the signal obtained from a single microparticle. The sample stream is introduced to the system using the same hydrodynamic focusing device, which ensures the alignment of the sample in between the electrodes. Utilising a 3D hydrodynamic focusing approach, we force all the particles to go through the sensing region of the electrodes. This fabrication scheme not only provides a very low-cost and easy method for rapid prototyping, but which can also be used for applications requiring 3D electric field focused through a narrow section of the microchannel.