Browsing by Subject "Photoresponse"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Open Access Graphene based flexible electrochromic devices(Nature Publishing Group, 2014-10-01) Polat, E. O.; Balci, O.; Kocabas, C.Graphene emerges as a viable material for optoelectronics because of its broad optical response and gate-tunable properties. For practical applications, however, single layer graphene has performance limits due to its small optical absorption defined by fundamental constants. Here, we demonstrated a new class of flexible electrochromic devices using multilayer graphene (MLG) which simultaneously offers all key requirements for practical applications; high-contrast optical modulation over a broad spectrum, good electrical conductivity and mechanical flexibility. Our method relies on electro-modulation of interband transition of MLG via intercalation of ions into the graphene layers. The electrical and optical characterizations reveal the key features of the intercalation process which yields broadband optical modulation up to 55 per cent in the visible and near-infrared. We illustrate the promises of the method by fabricating reflective/transmissive electrochromic devices and multi-pixel display devices. Simplicity of the device architecture and its compatibility with the roll-to-roll fabrication processes, would find wide range of applications including smart windows and display devices. We anticipate that this work provides a significant step in realization of graphene based optoelectronics.Item Open Access Optoelectronic properties of layered titanate nanostructure and polyaniline impregnated devices(Wiley - V C H Verlag GmbH & Co. KGaA, 2016) Vempati S.; Ertas Y.; Babu, V. J.; Uyar, TamerIntegrated structure of titanate nanotubes and nanosheets is investigated for their optical, electronic and optoelectronic properties when combined with HCl doped polyaniline (PANI). HR-TEM, SEM and XRD were employed for detailed morphological and microstructural understanding of the orthorhombic titanate nanostructure. Chemisorbed oxygeneous groups are probed with Raman spectroscopy which are found to desorb under UV-Vis treatment. We note a blue shift of Ti-O-Ti Raman frequency in contrast to Na-O-Ti stretching. Valence band region of titanate is analyzed for contribution of O2p, O2s, Na2p and Ti3p. Photoluminescence with different excitation energies revealed the presence of oxygen vacancy related defects in titanate. The highly occupied electronic states of PANI were also analyzed until 40 eV below the Fermi energy. XPS core-level analyses revealed ∼25 % doping density in PANI. Edges of valence band and HOMO are determined to be at 2.45 eV and 2.54 eV below Fermi energy for titanate and PANI, respectively. ITO/PANI/ITO has depicted negative photoresponse and the magnitude of which is reduced ∼4 times after combining with titanate nanostructure. Essentially the nanoscale architecture separates the emeraldine base and salt regions of PANI. This separation channelizes the charge carriers before trapping which reduces the magnitude of the negative photoresponse.Item Open Access Photocurrent generation in low dimensional nanomaterials(2022-11) Razeghi, MohammadaliThis thesis focuses on crucial issue on the understanding the underlying mechanisms of photoresponse in low-dimensional nanomaterials. As the size goes down to the micro and nano level, fine features and induced inhomogeneities like strain, thickness variation, substrate, and junctions become influential in determining plausible effects that can explain and control the light-matter interactions in an optoelectronic device. To develop a better understanding of the fundamental physical characteristics of nanomaterials and optimize thermal and electrical transport in nanomaterial devices, microscopic investigation at a single crystal level is required. In this thesis, I investigated photocurrent generation in two extreme cases: metallic silver nanowire (Ag NW) and semiconducting multilayer molybdenum disulfide (MoS2) using scanning photocurrent microscopy (SPCM). SPCM provides spatial mapping of photoresponse along with corresponding reflected light intensity with a few hundred nanometer resolution. Two terminal devices of Ag and Ag network devices are made by drop-casting NW and placing indium as metal contacts. The SPCM maps show that the NW- NW junctions and NW-contacts interface locally enhance the plasmonic field and act as hot spots. The increased temperature at hot spots is enough to modulate the resistance and results in a photo-bolometric response under the bias voltage. To further enhance the photo-bolometric effect, we decorated the nanowires with plasmonic Ag nanoparticles. The nanoparticles increase the number of hot spots and strengthen light coupling into plasmons. We also attributed zero bias response to the photothermoelectric effect. The photocurrent is generated by the Seebeck coefficient difference caused by nanogaps and nonuniformities in the geometry along the Ag NW. The second part of this thesis describes photocurrent generation by substrate engineering of a few-layer MoS2. To partially suspend a crystal, a flake of MoS2 is exfoliated and then transferred on a substrate with rectangular or circular holes. We observed photocurrent generation from the junction of the supported and suspended parts. Substrate effects like induced doping play an essential role in determining the properties of two-dimensional materials. Our investigations show that the Seebeck coefficient of the suspended part is changed due to isolation from the substrate. The difference in the Seebeck coefficient of suspended and supported regions forms a thermoelectric junction. We also investigated the impact of carrier type and concentration on photocurrent generation by gating experiments.