Browsing by Subject "PDMS"

Now showing 1 - 3 of 3

Open Access
An elastomeric grating coupler
(IOP Institute of Physics, 2006) Kocabas, A.; Ay, F.; Dâna, A.; Aydınlı, Atilla
We report on a novel nondestructive and reversible method for coupling free space light to planar optical waveguides. In this method, an elastomeric grating is used to produce an effective refractive index modulation on the surface of the optical waveguide. The external elastomeric grating binds to the surface of the waveguide with van der Waals forces and makes conformal contact without any applied pressure. As a demonstration of the feasibility of the approach, we use it to measure the refractive index of a silicon oxynitride film. This technique is nondestructive, reversible, low cost and can easily be applied to the characterization of optical materials for integrated optics. © 2006 IOP Publishing Ltd.
Open Access
Robust superhydrophobic fabrics by infusing structured polydimethylsiloxane films
(John Wiley & Sons, Inc., 2021-06-22) Celik, N.; Torun, I.; Ruzi, M.; Mustafa Serdar, Önses
Superhydrophobic coatings have large application potential in self-cleaning textiles. Low durability, high cost of fabrication, and environmental concerns over the usage of chemicals such as fluorocarbons limit the utilization of superhydrophobic coatings. This study reports a convenient and inexpensive approach to fabricate robust and fluorine-free superhydrophobic fabrics based on the transfer of structured polymer films and hydrophobic nanoparticles. In this approach, polydimethylsiloxane (PDMS) is infused between sheets of fabric and paper, followed by curing and removal of the paper. This process results in a fabric infused with PDMS whose structure is a negative replica of the paper surface. Then, hydrophobic nanoparticles are sprayed onto the structured PDMS side of the fabric. The infusion of PDMS and subsequent deposition of the hydrophobic nanoparticles enables strong bonding, as shown by the excellent solvent stability of the superhydrophobic fabric under ultrasonication. The proposed approach is universal in that it can be applied to almost any textiles, which upon coating, exhibited superhydrophobicity with a water contact angle of 172° and a sliding angle of 3°. Furthermore, the superhydrophobic fabric showed robust durability against water spray impact and mechanical bending where it can keep superhydrophobicity for at least 200 cycles of each test.
Open Access
Transferring the structure of paper for mechanically durable superhydrophobic surfaces
(Elsevier, 2020-10-24) Torun, İ.; Celik, N.; Ruzi, M.; Önses, Mustafa Serdar
Solution-phase deposition of nanomaterials represents a highly promising technology with strong industrial application potential for the fabrication of superhydrophobic surfaces. An important barrier towards the adaptation of such materials and processes in a broad range of applications is the limited mechanical durability of the nanostructures. Herein, we present a universal solution to this challenge by benefiting from the unique micro-structure of paper. Our approach is based on transferring the structure of paper into a target material, to form a mechanical protection layer for nanomaterials that were deposited from solution-phase, i.e. spray-coating. We demonstrate this concept through the transfer of the structure of paper to a free-standing PDMS film using a simple molding process. Spraying a dispersion of alkyl-silane functionalized silica nanoparticles on the structured free-standing film results in a hierarchically structured superhydrophobic surface with a water contact angle of 175° ± 2° and a sliding angle <2° ± 1°. The fabricated superhydrophobic surface displays high levels of mechanical, chemical and thermal stability. The robust, inexpensive, scalable, flexible, and environmentally friendly nature of the presented approach may be a key enabler in superhydrophobic coating applications.