Browsing by Subject "Organoclay"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Open Access Poly(epsilon caprolactone)/clay nanocomposites via host-guest chemistry(Elsevier Ltd, 2015) Arslan, M.; Tasdelen, M. A.; Uyar, Tamer; Yagci, Y.Cyclodextrin-modified montmorillonite (MMT-CD) has been prepared from commercial montmorillonite clay (Closite 30B) containing two hydroxyl groups by reacting succinic anhydride through esterification. Poly(epsilon caprolactone) (PCL)/clay nanocomposites are prepared by host-guest chemistry between MMT-CD as host and PCL, hydrophobic polymer as guest. The structures of the intermediates and final nanocomposite are investigated in detail by FT-IR XRD, TEM, DSC and TGA measurements. The intercalated/exfoliated morphologies are determined by combined XRD and TEM analyses. Thermal stabilities of all nanocomposites are improved by the addition of MMT-CD compared to the neat polymer. The DSC data confirm that the crystallinity of PCL is slightly increased by increasing clay loading. © 2015 Elsevier Ltd. All rights reserved.Item Open Access Polymer/clay nanocomposites through multiple hydrogen-bonding interactions(John Wiley and Sons Inc., 2015) Aydin, M.; Uyar, Tamer; Tasdelen, M. A.; Yagci Y.An 2-ureido-4[1H]pyrimidinone (UPy) motif with self-association capability (through quadruple hydrogen bonds) was successfully anchored onto montmorillonite clay layers. Polymer/clay nanocomposites were prepared by specific hydrogen bonding interactions between surface functionalized silica nanoclays and UPy-bonded supramolecular poly(ethylene glycol) or poly(É-caprolactone). The mixed morphologies including intercalated layers with a non-uniform separation and exfoliated single layers isolated from any stack were determined by combined X-ray diffraction and transmission electron microscopic measurements. Thermal analyses showed that all nanocomposites had higher decomposition temperatures and thermal stabilities compared with neat polymer. The differential scanning calorimetric data implied that the crystallinity of polymers did not show essential changes upon introduction of organomodified UPy clays.Item Open Access Polystyrene / clay nanocomposites by atom transfer radical nitroxide coupling chemistry(Wiley, 2013) Aydin, M.; Tasdelen, M. A.; Uyar, Tamer; Jockusch, S.; Turro, N. J.; Yagci, Y.An efficient protocol, atom transfer radical nitroxide coupling chemistry, for the preparation of polymer/clay nanocomposites via grafting-onto strategy with well-defined polymer, which were synthesized via atom transfer radical polymerization, has been described. The radical coupling, taking place between the clay layers, not only leads to attached polymer chains but also to successful nanocomposite formation with highly exfoliated morphology. Copyright © 2012 Wiley Periodicals, Inc.Item Open Access Preparation of fluorinated methacrylate/clay nanocomposite via in-situ polymerization: characterization, structure, and properties(John Wiley and Sons Inc., 2016) Karamane, M.; Raihane, M.; Tasdelen, M. A.; Uyar, Tamer; Lahcini, M.; Ilsouk, M.; Yagci Y.Novel fluorinated coating containing well-dispersed silicate nanolayers is successfully produced via in-situ free radical polymerization of 2,2,2-trifluoroethyl methacrylate in the presence of vinylbenzyl-functionalized montmorillonite with different loading. The organic modification of sodium montmorillonite is achieved through an ion exchange reaction with triphenylvinylbenzylphosphonium chloride as surfactant prepared before use by reaction with vinylbenyl chloride and phosphine. The following in-situ polymerization in the presence of organomodified clay leads to fluorinated nanocomposites with of partially exfoliated and intercalated morphologies, as determined via XRD and TEM analysis. The nanoscale dispersion of clay layers is also evidenced by thermal analysis; a moderate decrease of the glass transition temperature about 2–8 °C compared to their virgin PMATRIF and an improvement of their thermal stability as evidenced by TGA. The wettability of the nanocomposite films is also studied by contact angle measurements with water. The incorporation of organomodified clays not only increases the hydrophobicity of the fluorinated polymers but also improves the surface properties of obtained nanocomposites. Compared the virgin homopolymer, the mechanical properties of the nanocomposites are reduced by addition of organomodifed clay at temperature from 30 to 60 °C, whereas this trend is gradually decreased at higher temperature.