Browsing by Subject "Nanoantenna emitter"

Now showing 1 - 4 of 4

Open Access
Adaptive metasurface designs for thermal camouflage, radiative cooling, and photodetector applications
(2022-01) Buhara, Ebru
Metamaterials, described as artificial sub-wavelength nanostructures, refer to a class of manufactured materials that possess distinctive electromagnetic features which cannot be found with natural materials. Thermal tunability, negative re-fractive index, perfect absorption, and invisible cloaking are examples of these attributes. Here, we design and implement metamaterials in four important ap-plication areas, namely 1) Multi-spectral infrared camouflage through excitation of plasmon-phonon polaritons in a visible-transparent hBN-ITO nanoantenna emitter, 2) Adaptive visible and short-wave infrared camouflage using a dynami-cally tunable metasurface, 3) Mid-infrared adaptive thermal camouflage using a phase-change material coupled dielectric nanoantenna, 4) An All-Dielectric Meta-surface Coupled with Two-Dimensional Semiconductors for Thermally Tunable Ultra-narrowband Light Absorption. In the first work, a metasurface design is developed to provide adaptive camou-flage in both visible and SWIR ranges. The proposed metasurface is made of an indium tin oxide (ITO) grating on a metal-insulator-metal (MIM, Ag-Sb2S3-Ag) nanocavity. In the amorphous state, the design operates as a colored transmis-sive window while, in the crystalline phase, it switches into a reflective mirror. In the meantime, the cavity acts as a thermally tunable host for the ITO nanoan-tenna providing tunable SWIR absorption to cover two transmissive regions at 1150-1350 nm (Region I) and 1400-1700 nm (Region II). It is found that the excitation of extended surface plasmons (ESPs) and guided mode resonances (GMRs) are responsible for light absorption in the SWIR range. Our theoretical calculations show that, besides the design’s ability for color adoption, the SWIR reflectance in Region I/Region II are reduced to 0.37/0.53 and 0.75/0.25 in the amorphous/crystalline phases. In the second work, a hybrid nanoantenna architecture made of ITO-hBN grating is proposed to satisfy all multi-spectral camouflage requirements. In this design, simultaneous excitation of plasmon-phonon polaritons in ITO and hBN leads to broadband absorption in the NTIR range and reflection in MWIR and LWIR ranges. Moreover, the bulk absorption in ITO film provides SWIR mode camouflage. Moreover, to highlight the importance of this hybrid design, the ITO-hBN design is compared with ITO-TiO2 heterostructure(TiO2 is a lossless dielectric in our desired ranges). Finally, the camouflage performance of the meta-surface is evaluated as the outgoing emission suppression when the metasurface design is on top of the blackbody object. In the third work, a PCM-dielectric based metasurface nanoantenna emitter design is proposed to achieve low observability at the MIR region by tailoring the spectral emissivity of the design. The proposed thermal nanoantenna emitter is composed of a high index dielectric (silicon (Si) in our case) nanograting on top of a thick silver (Ag) mirror. An ultrathin VO2 interlayer is embedded within the grating to actively tune its absorption response. The design geometries are adopted to place the resonance wavelengths in the atmospheric absorption win-dows for thermal camouflage applications. Based on the position of the VO2 layer, the optical response of the design in the metal phase can be diversely tuned from a narrowband to a broadband thermal emitter. Therefore, upon increase in the surface temperature, the proposed metasurface based thermal nanoantenna emitter turns into a broadband emitter with a stronger radiative thermal emission while it compatibly releases its heat based on the camouflage technology require-ment. The proposed design has perfect matching with atmospheric absorption windows so that it can efficiently release its heat without being observed by ther-mal camera systems. The detectability of the structure by a possible IR sensor is calculated using power calculations over the selected spectra. In addition, due to the hysteresis behavior of VO2, the calculations are done separately for cooling and heating conditions. In the fourth and final work, a dielectric based metasurface platform is pro-posed to achieve ultra-narrowband light absorption within a monolayer thick TMDC layer. For this purpose, the metasurface design is optimized. Then, this design is coupled with mono and multilayer TMDCs to observe better absorption results. For this purpose, MoS2, and WS2 are chosen as the most commonly used TMDCs. The coupling of light into Mie resonances, supported by dielec-tric nanograting, provides narrowband absorption within the TMDC layer. To reach further enhancement, a cavity design is integrated into this dielectric-based metasurface. For the best optimized design, the absorptance efficiency reaches to 0.85 and FWHM stays as narrow as 3.1 nm. Finally, the thermal tunability char-acteristic of the design is shown, without use of any phase change material. This is achieved due to strong light confinement within the design. Due to this con-finement, any small change in the refractive index is seen by the resonant design. Thus, the resonance frequency shifts and thermal tunability is acquired. The thermal sensitivity of the above-mentioned optimized design reaches to 0.0096 nm/◦C.
Open Access
Mid-infrared adaptive thermal camouflage using a phase-change material coupled dielectric nanoantenna
(Institute of Physics Publishing Ltd., 2021-04-23) Buhara, Ebru; Ghobadi, Amir; Khalichi, Bahram; Kocer, Hasan; Özbay, Ekmel
Recently, camouflage technology has attracted researchers' attention in a large variety of thermal applications. As a special phase change material (PCM), vanadium dioxide (VO2) is an excellent candidate for the studies conducted on thermal camouflage technology. VO2 has a transition from the insulator phase to the metal phase with the increase of the temperature. With regards to this unique feature, VO2 can contribute dynamic properties to the camouflage design. In this paper, a PCM–dielectric based metamaterial mid-infrared adaptive thermal camouflage nanoantenna is designed to perfectly mimic the atmospheric windows. The adaptive property of the proposed structure is obtained by using an ultrathin VO2 interlayer embedded within the grating. The spectral responses of the structure are computed using the finite difference time domain method, and the invisibility of the structure is proved using power calculations in the different mid-infrared regions.
Open Access
Plasmonic metamaterial based structures for designing of multiband and thermally tunable light absorbers, multiple thermal infrared emitter, and high-contrast asymmetric transmission optical diode
(2021-07) Osgouei, Ataollah Kalantari
Metamaterials with sub-wavelength nanostructures refer to a class of synthetic materials that possess exotic electromagnetic properties which cannot be observed with natural materials. Negative refractive index, asymmetric light transmission, invisible cloaking, and lasing are examples of these attributes. Among these possible applications, the concept of light confinement and harvesting by subwavelength structures have attracted considerable attention due to their widespread applications ranging from thermal emission, optical modulator, sensing, and photodetectors. Here, we propose and design plasmonic metamaterials with subwavelength structures in four different application areas, namely 1) Hybrid indium tin oxide-Au metamaterial absorber in the visible and near-infrared ranges for selective thermal emissions and sensors. 2) Active tuning from narrowband to broadband absorbers using a sub-wavelength VO2 for optical modulator. 3) A spectrally selective nanoantenna emitter compatible with multiple thermal infrared applications. 4) Diode like high-contrast asymmetric transmission of linearly polarized waves. In the first work, we propose a multi-band Metamaterial Perfect absorber (MPA) with two narrowband absorption responses that are centered on the visible and near-infrared (NIR) wavelengths [773 􀀁􀀂 and 900 􀀁􀀂, respectively] and a broadband absorptive characteristic in another window in the NIR region [ranging from 1,530 􀀁􀀂 to 2,700 􀀁􀀂 with a bandwidth of 1,170 􀀁􀀂]. The MPA comprises a periodic array of self-aligned hybrid indium tin oxide (ITO)-Au split-ring-resonators that are separated from an optically thick bottom reflector with a SiO2 layer. Based on numerical calculations, which are accompanied with a semi-analytical examination, we find that the dual narrowband and broadband responses are attributed to the hybridization of the optical responses of gold as a plasmonic material with the ones of ITO. Note that ITO acts as a low-loss dielectric in the visible range and a lossy plasmonic material in the NIR region. Moreover, due to the applied symmetry in the unit cell of the metamaterial, the proposed MPA represents polarization insensitive and omnidirectional absorptive features. The proposed metastructure can find potential applications in selective thermophotovoltaic devices, thermal emitters, and sensors. In the second work, we propose an MPA with diverse functionalities enabled by vanadium dioxide (VO2) embedded in a metal-dielectric plasmonic structure. For the initial design purpose, a Silicon (Si) nanograting on a Silver (Ag) mirror is proposed to have multiple resonant responses in the near infrared (NIR) region. Then, the insertion of a thin VO2 layer at the right position enables the design to act as an on/off switch and resonance tuner. In the insulator phase of VO2, in which the permittivity data of VO2 is similar to that of Si, a double strong resonant behavior is achieved within the NIR region. By increasing the temperature, the state of VO2 transforms from insulator to metallic so that the absorption bands turn into three distinct resonant peaks with close spectral positions. Upon this transformation, a new resonance emerges and the existing resonance features experience blue/red shifts in the spectral domain. The superposition of these peaks makes the overall absorption bandwidth broad. Although Si has a small thermo-optic coefficient, owing to strong light confinement in the ultrasmall gaps, a substantial tuning can be achieved within the Si nanogratings. Therefore, the proposed hybrid design can provide multi-resonance tunable features to cover a broad range and can be a promising strategy for the design of linearly thermal-tunable and broadband MPAs. Owing to the proposed double tuning feature, the resonance wavelengths exhibits great sensitivity to temperature, covering a broad wavelength range. Overall, the proposed design strategy demonstrates diverse functionalities enabled by the integration of a thin VO2 layer with plasmonic absorbers. In the third work, we design a wavelength-selective nanoantenna emitter based on the excitation of gap-surface plasmon modes using a metal–insulator–metal configuration (silicon dioxide (SiO2) sandwiched between silver (Ag) layers) for satisfying multiple infrared applications. The proposed design, which is called design I, realizes triple narrowband perfect absorptions at the resonance wavelengths of 1524 nm, 2279 nm, and 6000 nm, which perfectly match the atmospheric absorption bands while maintaining relatively low emissivity in the atmospheric transparency windows of 3 − 5 􀀃m and 8 − 12 􀀃m. Later, the functionality of design I is extended, which is called design II, to include a broadband absorption at the near-infrared region to minimize the solar irradiation reflection from the nanoantenna emitter. Finally, single- and three-layer graphene are introduced to provide a real-time tuning of the infrared signature of the proposed nanoantenna emitter (design II). It is also demonstrated that the three-layer graphene structure can suppress an undesired absorption resonance wavelength related to the intrinsic vibrational modes (optical phonons) of the SiO2 layer by 53.19% compared to 25.53% for the single-layer one. The spectral analysis of design I is validated using both analytical and numerical approaches where the numerical simulation domain is extended for the analysis of design II. The thermal characteristic analyses of design I and design II (without/with graphene layers) reveal that infrared signatures of the blackbody radiation are significantly reduced for the whole wavelength spectrum at least by 96% and 91% within a wide temperature ranging from room temperature to 500 􀀄, respectively. In the fourth and final work, we present a narrow-band optical diode with a high-contrast forward-to-backward ratio at the near-infrared (NIR) region. The design has a forward transmission of approximately 88%, and a backward one of less than 3%, yielding a contrast ratio of greater than 14.5 dB at a wavelength of 1550 nm. The structure is composed of a one-dimensional diffraction grating on top of a dielectric slab waveguide, both of which are made of silicon nitride (Si3N4), and all together are placed over a silver (Ag) thin film embedded on a dielectric substrate. Utilizing a dielectric-based diffraction grating waveguide on a thin silver layer leads to the simultaneous excitation of two surface plasmon modes known as long- and short-range surface plasmon polaritons (SPPs) at both interfaces of the metallic layer. The plasmon-tunneling effect, which is the result of the coupling of SPPs excited at the upper interface of the metallic layer to the radiation modes, provides a high asymmetric transmission (AT) property. The spectral response of the proposed high-contrast AT device is verified using both rigorous coupled-wave analysis as an analytical approach and finite difference time domain as a numerical one.
Open Access
A spectrally selective gap surface-plasmon-based nanoantenna emitter compatible with multiple thermal infrared applications
(Institute of Physics Publishing Ltd., 2021-08-20) Osgouei, Ataollah Kalantari; Ghobadi, Amir; Khalichi, Bahram; Özbay, Ekmel
Wavelength-selective nanoantenna emitters have attracted considerable attention due to their widespread applications ranging from thermal radiation management to thermophotovoltaics. In this paper, we design a wavelength-selective nanoantenna emitter based on the excitation of gap-surface plasmon modes using a metal–insulator–metal configuration (silicon dioxide (SiO2) sandwiched between silver (Ag) layers) for satisfying multiple infrared applications. The proposed design, which is called design I, realizes triple narrowband perfect absorptions at the resonance wavelengths of 1524nm,2279nm, and 6000nm, which perfectly match the atmospheric absorption bands while maintaining relatively low emissivity in the atmospheric transparency windows of 3-5 µm and 8-12 µm. Later, the functionality of design I is extended, which is called design II, to include a broadband absorption at the near-infrared region to minimize the solar irradiation reflection from the nanoantenna emitter. Finally, single- and three-layer graphene are introduced to provide a real-time tuning of the infrared signature of the proposed nanoantenna emitter (design II). It is also demonstrated that the three-layer graphene structure can suppress an undesired absorption resonance wavelength related to the intrinsic vibrational modes (optical phonons) of the SiO2 layer by 53.19% compared to 25.53% for the single-layer one. The spectral analysis of design I is validated using both analytical and numerical approaches where the numerical simulation domain is extended for the analysis of design II. The thermal characteristic analyses of design I and design II (without/with graphene layers) reveal that infrared signatures of the blackbody radiation are significantly reduced for the whole wavelength spectrum at least by 96% and 91% within a wide temperature ranging from room temperature to 500K, respectively.