Browsing by Subject "IEEE 802.16"
Now showing 1 - 5 of 5
- Results Per Page
- Sort Options
Item Open Access Double binary turbo codes analysis and decoder implementation(2008) Yılmaz, ÖzlemClassical Turbo Code presented in 1993 by Berrau et al. received great attention due to its near Shannon Limit decoding performance. Double Binary Circular Turbo Code is an improvement on Classical Turbo Code and widely used in today’s communication standards, such as IEEE 802.16 (WIMAX) and DVBRSC. Compared to Classical Turbo Codes, DB-CTC has better error-correcting capability but more computational complexity for the decoder scheme. In this work, various methods, offered to decrease the computational complexity and memory requirements of DB-CTC decoder in the literature, are analyzed to find the optimum solution for the FPGA implementation of the decoder. IEEE 802.16 standard is taken into account for all simulations presented in this work and different simulations are performed according to the specifications given in the standard. An efficient DB-CTC decoder is implemented on an FPGA board and compared with other implementations in the literature.Item Open Access A novel queue-aware wireless link adaptation mechanism and its fixed-point analytical model(SpringerOpen, 2015) Ozturk, O.; Akar, N.A point-to-point (PTP) wireless link is studied that carries long-lived TCP flows and is controlled with active queue management (AQM). A cross-layer queue-aware adaptive modulation and coding (AMC)-based link adaptation (LA) mechanism is proposed for this wireless link to improve the TCP-level throughput relative to the case where AMC decisions are made based solely on the physical layer (PHY) parameters. The proposed simple-to-implement LA mechanism involves the use of an aggressive modulation and coding scheme (MCS) with high spectral efficiency and high block error rates when the queue occupancy exceeds a certain threshold, but otherwise a relatively conservative MCS with lower spectral efficiency and lower block error rates. A fixed-point analytical model is proposed to obtain the aggregate TCP throughput attained at this wireless link and the model is validated by ns-3 simulations. Numerical experimentation with the proposed analytical model applied to an IEEE 802.16-based wireless link demonstrates the effectiveness of the proposed queue-aware LA (QAWLA) mechanism in a wide variety of scenarios including cases where the channel information is imperfect. The impact of the choice of the queue occupancy threshold of QAWLA is extensively studied with respect to the choice of AQM parameters in order to provide engineering guidelines for the provisioning of the wireless link.Item Open Access rtPS uplink scheduling algorithms for IEEE 802.16 networks(Boğaziçi University, 2008-06) Ertürk, Mustafa Cenk; Akar, NailIEEE 802.16 MAC provides flexible bandwidth allocation and QoS mechanisms for users with different requirements. However, QoS scheduling is not specified by the 802.16 standard and is thus left open for vendors' implementation. In this paper, we propose an uplink scheduler to be used in WiMAX Base Station (BS) for rtPS type of connections. We propose that the base station maintains a leaky bucket for each rtPS connection to police and schedule rtPS traffic for uplink traffic management. The proposed scheduler is studied via simulations in MATLAB and throughput and fairness properties of the scheduler are demonstrated. Copyright ©2008 by Boǧaziçi University.Item Open Access A survey on scheduling in IEEE 802.16 mesh mode(Institute of Electrical and Electronics Engineers, 2010) Kas, M.; Yargicoglu, B.; Korpeoglu, I.; Karasan, E.IEEE 802.16 standard (also known as WiMAX) defines the wireless broadband network technology which aims to solve the so called last mile problem via providing high bandwidth Internet even to the rural areas for which the cable deployment is very costly. The standard mainly focuses on the MAC and PHY layer issues, supporting two transmission modes: PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an optional mode developed as an extension to PMP mode and it has the advantage of having an improving performance as more subscribers are added to the system using multi-hop routes. In 802.16 MAC protocol, mesh mode slot allocation and reservation mechanisms are left open which makes this topic a hot research area. Hence, the focus of this survey will mostly be on the mesh mode, and the proposed scheduling algorithms and performance evaluation methods. © 2010 IEEE.Item Open Access Uplink scheduling algorithms for the rtPS traffic class for IEEE 80216 networks(2008) Ertürk, Mustafa CenkIEEE 802.16 MAC provides extensive bandwidth allocation and QoS mechanisms for various types of applications. However, the scheduling mechanisms for the uplink and downlink are unspecified by the IEEE 802.16 standard and are thus left open for vendors’ own implementations. Ensuring QoS requirements at the MAC level for different users with different QoS requirements and traffic profiles is also another challenging problem in the area. The standard defines five different scheduling services one of them being the real-time Polling Service (rtPS). In this thesis, we propose an uplink scheduler to be implemented on the WiMAX Base Station (BS) for rtPS type connections. We propose that the base station maintains a leaky bucket for each rtPS connection to police and schedule rtPS traffic for uplink traffic management. There are two scheduling algorithms defined in this study: one is based on a simpler round robin scheme using leaky buckets for QoS management, whereas the other one uses again leaky buckets for QoS management but also a proportional fair scheme for potential throughput improvement in case of varying channel conditions. The proposed two schedulers are studied via simulations using MATLAB to demonstrate their performance in terms of throughput, fairness and delay. We show that the leaky bucket based scheduler ensures the QoS commitments of each user in terms of a minimum bandwidth guarantee whereas the proportional fair algorithm is shown to opportunistically take advantage of varying channel conditions.