Browsing by Subject "Hydrophilicity"
Now showing 1 - 7 of 7
Results Per Page
Sort Options
Item Open Access Effects of ions on the liquid crystalline mesophase of transition-metal salt: surfactant (CnEOm)(American Chemical Society, 2004) Dag, Ö.; Alayoǧlu, S.; Uysal, İ.The transition-metal aqua complex salts [M(H2O) x]Y2 (where M is some of the first- and second-row transitionmetal ions and Y is Cl-, NO3-, and ClO4- counteranions) form liquid crystalline (LC) mesophases with oligo(ethylene oxide) nonionic surfactants (CnH 2n+1(CH2CH2O)mOH, denoted as C nEOm). The structure of the [M(H2O) x]Y2:CnEOm mesophase is usually 2D hexagonal in nitrate systems, cubic in perchlorate systems, and absent in the chloride systems. The solubility of the metal aqua complex salt follows the Hofmeister series in a [M(H2O)x]Y2:C nEOm mesophase. However, the nitrate ion interacts with the metal center as a bidentate and/or unidentate ligand, therefore reducing the ion density (and/or ionic strength) of the LC medium and further enhancing the solubility of nitrate salt in the LC systems. The cobalt chloride salt is the only soluble chloride salt that undergoes ligand-exchange reactions in the [Co(H2O)6]Cl2:CnEOm system. In an LC mesophase, anions have a greater influence on the hydrophilicity of nonionic surfactants than do cations. The structure and stability of the LC mesophase can be controlled by controlling either the hydrophilicity of the nonionic surfactant (by choosing the right anion type) or the ion density of the medium (by either influencing the equilibrium between the free and coordinated anions or balancing between the coordinating and noncoordinating anions in the medium).Item Open Access Facile synthesis of cross-linked patchy fluorescent conjugated polymer nanoparticles by click reactions(2011) İbrahimova, V.; Ekiz, S.; Gezici, Ö.; Tuncel, D.Here, we report a novel method to synthesize multifunctional nanoparticles that can be used in biological studies, such as in cell imaging and as a carrier for biomolecules/drugs. The nanoparticles were prepared either via Cu-catalyzed or cucurbit[6]uril (CB6)-catalyzed click reactions between azide groups containing hydrophobic blue, green and yellow emitting fluorene-based conjugated polymers and a hydrophilic diaminodialkyne containing cross-linker. Through the click reaction, not only does the cross-linking confer stability, but it also introduces functional groups, such as triazoles and amines, to the nanoparticles. Moreover, CB6 not only acted as a catalyst to facilitate the copper-free click reaction, but it also allowed us to obtain nanoparticles containing rotaxanes in which the triazole units were encapsulated by CB6 units. TEM images of the nanoparticles also showed that they display very interesting morphologies. Incorporation of hydrophilic functional groups to the hydrophobic conjugated polymers resulted in a distinct phase separation, producing Janus-like or patchy particles.Item Open Access Injectable in situ forming microparticles: A novel drug delivery system(2012) Yapar, E. A.; Inal, Ö.; Özkan, Y.; Baykara, T.Pharmaceutical formulation research has recently been focusing on delivery systems which provide long therapeutic effects and reduced side effects, and involving simplified production stages and facilitated application process. In situ forming microparticle (ISM) systems, one of the latest approach in this field, offer a new encapsulation technique and meet the objectives stated above. Factors such as the carrier used to form the multiparticles, amount and type of drug and the vehicle type can be taken as the main performance criteria for these systems. Ongoing studies have shown that this new multiparticulate drug delivery system is suitable for achieving new implant delivery system with low risk of dose-dumping, capable of being modulated to exhibit varying release patterns, reproducible, easily applicable and welltolerated compared with classically surgical implants.Item Open Access Poly-cyclodextrin cryogels with aligned porous structure for removal of polycyclic aromatic hydrocarbons (PAHs) from water(Elsevier, 2017-08) Topuz, F.; Uyar, TamerCyclodextrins (CDs) are sugar-based cyclic oligosaccharides, which form inclusion complexes with small guest molecules through their hydrophobic cavity. Here we successfully synthesized highly porous poly-cyclodextrin (poly-CD) cryogels, which were produced under cryogenic conditions by the cross-linking of amine-functional CDs with PEG-based diepoxide cross-linker. The poly-CD cryogels showed aligned porous network structures owing to the directional freezing of the matrix, of which the pore size and architecture exposed variations depending on the composition of the reactants. The cryogels were employed for the removal of genotoxic polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions. They reached PAH sorption capacities as high as 1.25 mg PAH per gram cryogel. This high sorption performance is due to interactions between PAHs and the complete swollen network, and thus, is not restricted by interfacial adsorption. Given that the hydrophilic nature of the components, the sorption performance could only be attributed to the inclusion complex formation of CDs with PAH molecules. The poly-CD cryogels could be recycled with an exposure to ethanol and reused without any significant loss in the sorption capacity of PAHs.Item Open Access Rapid and alternative fabrication method for microfluidic paper based analytical devices(Elsevier B.V., 2016) Malekghasemi, S.; Kahveci, E.; Duman, M.A major application of microfluidic paper-based analytical devices (µPADs) includes the field of point-of-care (POC) diagnostics. It is important for POC diagnostics to possess properties such as ease-of-use and low cost. However, µPADs need multiple instruments and fabrication steps. In this study, two different chemicals (Hexamethyldisilazane and Tetra-ethylorthosilicate) were used, and three different methods (heating, plasma treatment, and microwave irradiation) were compared to develop µPADs. Additionally, an inkjet-printing technique was used for generating a hydrophilic channel and printing certain chemical agents on different regions of a modified filter paper. A rapid and effective fabrication method to develop µPADs within 10 min was introduced using an inkjet-printing technique in conjunction with a microwave irradiation method. Environmental scanning electron microscope (ESEM) and x-ray photoelectron spectroscopy (XPS) were used for morphology characterization and determining the surface chemical compositions of the modified filter paper, respectively. Contact angle measurements were used to fulfill the hydrophobicity of the treated filter paper. The highest contact angle value (141°±1) was obtained using the microwave irradiation method over a period of 7 min, when the filter paper was modified by TEOS. Furthermore, by using this method, the XPS results of TEOS-modified filter paper revealed Si2p (23%) and Si-O bounds (81.55%) indicating the presence of Si–O–Si bridges and Si(OEt) groups, respectively. The ESEM results revealed changes in the porous structures of the papers and decreases in the pore sizes. Washburn assay measurements tested the efficiency of the generated hydrophilic channels in which similar water penetration rates were observed in the TEOS-modified filter paper and unmodified (plain) filter paper. The validation of the developed µPADs was performed by utilizing the rapid urease test as a model test system. The detection limit of the developed µPADs was measured as 1 unit ml−1 urease enzyme in detection zones within a period of 3 min. The study findings suggested that a combination of microwave irradiation with inkjet-printing technique could improve the fabrication method of µPADs, enabling faster production of µPADs that are easy to use and cost-effective with long shelf lives.Item Open Access Robust superhydrophilic patterning of superhydrophobic ormosil surfaces for high-throughput on-chip screening applications(Royal Society of Chemistry, 2016) Beyazkilic, P.; Tuvshindorj, U.; Yildirim, A.; Elbuken, C.; Bayındır, MehmetThis article describes a facile method for the preparation of two-dimensionally patterned superhydrophobic hybrid coatings with controlled wettability. Superhydrophobic coatings were deposited from nanostructured organically modified silica (ormosil) colloids that were synthesized via a simple sol-gel method. On the defined areas of the superhydrophobic ormosil coatings, stable wetted micropatterns were produced using Ultraviolet/Ozone (UV/O) treatment which modifies the surface chemistry from hydrophobic to hydrophilic without changing the surface morphology. The degree of wettability can be precisely controlled depending on the UV/O exposure duration; extremely wetted spots with water contact angle (WCA) of nearly 0° can be obtained. Furthermore, we demonstrated high-throughput biomolecular adsorption and mixing using the superhydrophilic patterns. The proposed superhydrophilic-patterned nanostructured ormosil surfaces with their simple preparation, robust and controlled wettability as well as adaptability on flexible substrates, hold great potential for biomedical and chemical on-chip analysis.Item Open Access Theoretical analysis of substituent effects on building blocks of conducting polymers: 3, 4'-substituted bithiophenes(American Chemical Society, 1999) Salzner, U.; Kızıltepe, T.Substituents are widely used to modify the properties of conducting polymers. To study substituent effects on energy levels and energy gaps systematically, CH3-, OH-, NH2-, CN-, and CCH-substituted bithiophenes were examined with density functional theory and NBO analysis. Total charges and :r-electron densities were analyzed separately to examine π- and σ-effects. Second-order perturbation theory was used to quantify conjugation in terms of orbital interactions. NBO orbital energies were employed to investigate the effect of alternating donor-acceptor substitution. Substituents in 3- and 4- positions shift HOMO and LUMO levels in parallel and hardly influence HOMO- LUMO gaps. For level shifting the π-donating and π-accepting abilities are most important; electronegativity mainly influences the σ-orbitals and is less crucial in determining energy gaps. Alternating donor-acceptor substitution leads to HOMO and LUMO energies that are average between those of the parent systems and has little effect on energy gaps.