Browsing by Subject "Fiber diameters"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Open Access Evaluation of fiber diameter and morphology differences for electrospun fibers on bacterial immobilization and bioremediation performance(Elsevier, 2017-05) Sarioglu O.F.; Celebioglu A.; Tekinay, T.; Uyar, TamerIn this report, morphology and fiber diameter differences of electrospun polysulfone (PSU) fibers on bacterial immobilization and bioremediation performance were evaluated. PSU fibers were produced with aligned or randomly oriented morphologies, and PSU fibers with thinner and thicker diameters were also produced. PSU fibers were utilized as carrier matrices for bacterial integration and the sample showing highest bacterial immobilization was tested for bioremediation of ammonium and methylene blue dye in water. It was found that randomly oriented and thinner PSU fibers are the optimal system for bacterial immobilization, hence bioremediation studies were performed with this sample. The results demonstrated that bacteria immobilized PSU fibers are promising candidates for simultaneous removal of ammonium and methylene blue dye, and they have a potential to be used in remediation of water systems.Item Open Access Functional electrospun polystyrene nanofibers incorporating α-, β-, and γ-cyclodextrins: Comparison of molecular filter performance(2010) Uyar, Tamer; Havelund, R.; Hacaloglu, J.; Besenbacher, F.; Kingshott, P.Electrospinning has been used to successfully create polystyrene (PS) nanofibers containing either of three different types of cyclodextrin (CD); α-CD, β-CD, and γ-CD. These three CDs are chosen because they have different sized cavities that potentially allow for selective inclusion complex (IC) formation with molecules of different size or differences in affinity of IC formation with one type of molecule. The CD containing electrospun PS nanofibers (PS/CD) were initially characterized by scanning electron microscopy (SEM) to determine the uniformity of the fibers and their fiber diameter distributions. X-ray photoelectron spectroscopy (XPS) was used to quantitatively determine the concentration of each CD on the different fiber surfaces. Static time-of-flight secondary ion mass spectrometry (static-ToF-SIMS) showed the presence of each type of CD on the PS nanofibers by the detection of both the CD sodium adduct molecular ions (M + Na+) and lower molecular weight oxygen containing fragment ions. The comparative efficiency of the PS/CD nanofibers/nanoweb for removing phenolphthalein, a model organic compound, from solution was determined by UV-vis spectrometry, and the kinetics of phenolphthalein capture was shown to follow the trend PS/α-CD > PS/β-CD > PS/γ-CD. Direct pyrolysis mass spectrometry (DP-MS) was also performed to ascertain the relative binding strengths of the phenolphthalein for the CD cavities, and the results showed the trend in the interaction strength was β-CD > γ-CD > α-CD. Our results demonstrate that nanofibers produced by electrospinning that incorporate cyclodextrins with different sized cavities can indeed filter organic molecules and can potentially be used for filtration, purification, and/or separation processes. © 2010 American Chemical Society.Item Open Access Transformation of polymer-ZnO core-shell nanofibers into ZnO hollow nanofibers: Intrinsic defect reorganization in ZnO and its influence on the photocatalysis(Elsevier, 2015) Kayaci, F.; Vempati S.; Ozgit Akgun, C.; Donmez, I.; Bıyıklı, Necmi; Uyar, TamerPhotocatalytic activity (PCA) on semiconductors is known to be majorly influenced by specific surface area and intrinsic lattice defects of the catalyst. In this report, we tested the efficiencies of 1D ZnO catalysts of varying fiber diameter (80. nm and 650. nm of inner diameter) in two formats, viz. core-shell and hollow nanofibers, where the former is calcined to yield the latter. These nanofibrous catalysts were produced by combining electrospinning and atomic layer deposition processes which were then subjected to thorough characterization including photoluminescence (PL) unveiling the details of intrinsic defects/densities. During the thermal treatment, intrinsic defects are reorganized and as a result a new PL band is observed apart from some significant changes in the intensities of other emissions. The densities of various intrinsic defects from PL are compared for all samples and juxtaposed with the PCA. Careful scrutiny of the various results suggested an anti-correlation between surface area and PCA; i.e., higher surface area does not necessarily imply better PCA. Beyond a limit, the most deterministic factor would be the density of surface defects rather than the specific surface area. The results of this study enable the researchers to fabricate 1D semiconductor photocatalysts while striking the balance between surface area and density of defects.