Browsing by Subject "Crystallinity"

Now showing 1 - 3 of 3

Open Access
Air-stable n-channel diketopyrrolopyrrole-diketopyrrolopyrrole oligomers for high performance ambipolar organic transistors
(American Chemical Society, 2016) Mukhopadhyay, T.; Puttaraju, B.; Senanayak, S. P.; Sadhanala, A.; Friend, R.; Faber, H. A.; Anthopoulos, T. D.; Salzner, U.; Meyer A.; Patil, S.
n-channel organic semiconductors are prone to oxidation upon exposed to ambient conditions. Herein, we report design and synthesis of diketopyrrolopyrrole (DPP)-based oligomers for ambipolar organic thin-film transistors (OFETs) with excellent air and bias stability at ambient conditions. The cyclic voltammetry measurements reveal exceptional electrochemical stability during the redox cycle of oligomers. Structural properties including aggregation, crystallinity, and morphology in thin film were investigated by UV-visible spectroscopy, atomic force microscopy (AFM), thin-film X-ray diffraction (XRD), and grazing incidence small-angle X-ray scattering (GISAXS) measurements. AFM reveals morphological changes induced by different processing conditions whereas GISAXS measurements show an increase in the population of face-on oriented crystallites in films subjected to a combination of solvent and thermal treatments. These measurements also highlight the significance of chalcogen atom from sulfur to selenium on the photophysical, optical, electronic, and solid-state properties of DPP-DPP oligomers. Charge carrier mobilities of the oligomers were investigated by fabricating top-gate bottom-contact (TG-BC) thin-film transistors by annealing the thin films under various conditions. Combined solvent and thermal annealing of DPP-DPP oligomer thin films results in consistent electron mobilities as high as ∼0.2 cm2 V-1 s-1 with an on/off ratio exceeding 104. Field-effect behavior was retained for up to ∼4 weeks, which illustrates remarkable air and bias stability. This work paves the way toward the development of n-channel DPP-DPP-based oligomers exhibiting retention of field-effect behavior with superior stability at ambient conditions.
Open Access
Interlocking shish-kebab morphology in polybutene-1
(John Wiley & Sons, Inc., 2002) Kalay, G.; Kalay, C. R.
The aim of this research was to explore the effect of shear-controlled orientation injection molding (SCORIM) on polybutene-1 (PB-1). This article describes the methods and processing conditions used for injection molding and discusses the properties of the moldings. Both conventional and SCORIM have been used for the production of moldings. SCORIM is based on the application of specific macroscopic shears to a solidifying melt that facilitates enhanced molecular alignment. The effect of the process was investigated by performing mechanical tests, X-ray studies, differential scanning calorimetric studies, polarized light microscopy, and atomic force microscopy (AFM). Moldings exhibited an improved mechanical performance as compared with conventional moldings. Young's modulus was increased over twofold, and the impact energy was enhanced by 60%. The improvement in mechanical performance was combined with an increase in crystallinity and enhanced molecular orientation. The application of SCORIM also favored the formation of the stable Form I' in PB-1. The formation of interlocking shish-kebab morphology following the application of SCORIM was observed in the AFM studies. Relationships between the mechanical properties of PB-1 and the micromorphologies formed during processing are demonstrated.
Open Access
Investigation and control of the static electrification in polypropylene
(2016-08) Yavuz, Zelal
The electrostatic charging of polymers due to friction is such a common phenomenon in daily usage of polymers that can be a problematic issue for various applications, such as in electronic devices, textile, space industry and so on. Hence, understanding and controlling of the mechanism behind the static electrification, which is basically because of the charge accumulation on the material, is an important subject in terms of the applications. In the way to understand static electrification of bulk materials, examining the physical and morphological properties is crucial. On the other hand, when the physical properties are considered, the structure of polymer plays a significant role, yet there is a lack of knowledge in the literature about the relation between these structural properties and triboelectricity. As a reason of this, it can be pointed out that in the proposed mechanisms about the frictional electrification the structure-property relation could not get sufficient attention so far. In this thesis, the crystalline structure of polymer, which plays a crucial role in the determination of physical properties of polymeric materials, was studied and by using different treatment techniques, such as microwave radiation and mechanical stress, and the relation between the degree of crystallinity and triboelectric charging was investigated. Due to its economical cost and heat-sensitive degree of crystallinity that can be changed in a significant way polypropylene (PP) which is a semi-crystalline polymer was used in this study. Hence, by utilizing different spectroscopic and microscopic techniques the relation between physical properties and triboelectrification of polypropylene was investigated in detail. In order to understand the physical and chemical changes taking place in untreated and treated polypropylene X-ray Photoelectron Spectroscopy (XPS), Raman Spectroscopy, X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), Differential Scanning Calorimetry (DSC) are the techniques that were employed. In this study, by considering the mechanism behind static electrification the potential link between electrification and degree of crystallinity was designated. Furthermore, the generation of charge on the surface of mechanically treated polypropylene film was observed for the first time by this current work. The results lead to the fact that it is possible to convert mechanical energy into electrical energy without any contact between the objects by introducing physical forces onto the insulating materials and the reasons behind non-contact electrification was investigated. Therefore, in the light of the results obtained from this study, more efficient triboelectric generators can be designed to harvest electrical energy from mechanical energy.