Browsing by Subject "Crystal optics."

Now showing 1 - 6 of 6

Open Access
Bio-inpired all-polymer 2d photonic crystal fibers = Doğadan esinlenilmiş tamamen polimer 2B fotonik kristal fiberleri
(2014) Doğan, Tamer
Photonic crystals are essential part of the integrated systems which require manipulation of light in a manner that all-optical polarization and re ection properties are completely calibrated to necessary levels. However, beyond scienti c development of photonic crystals, biological systems also provided inspiration for the eld since they perfected the mechanisms in terms of coloration over millions of years. In addition, natural samples are also observed to serve and function for more than single purpose, and this further illuminates the technological designs so as to develop multifunctional structures. Anas Platyrhynchos L. (mallard) is one of the natural examples and detailed investigations yield that its neck feathers have structural coloration, iridescence and hydrophobicity. Being inspired form mallard duck, two-dimensional photonic crystal bers are produced to imitate coloration and surface architecture. The fabrication is established by iterative size reduction technique which, as a top-down method, enables design of nano-scale materials from macro-scale structures. To accurately imitate duck feathers, polycarbonate (PC) and polyvinyldi uoride (PVDF), are characterized and selected for their thermal compatibility and dielectric properties among number of polymers. Produced 2D photonic crystal bers have been demonstrated to re ect color of green like duck feathers, and also shown to have iridescence by optical means. Besides single coloration, all colors of visible spectrum are also obtained to attest potential applicability of fabrication technique and produced bers. It is also substantiated that all colors can be obtained in a single ber by tapering a thick ber. In addition, last but not least, 2D photonic crystal bers are carefully designed to have surface roughness which promoted hydrophobic feature of PVDF and provided better hydrophobicity than natural counterparts. Manufactured structures are also the rst demonstration for production of all-polymer two dimensional photonic crystal bers which may be used in textile or ltering technologies.
Open Access
Design of compact optical devices based on periodic meta-structures
(2013) Akosman, Ahmet Emin
Manipulation of the flow of light is demanded for several applications such as communication, data storage, sensor, photovoltaic cells, microscopy, lasers and light emitting diodes for the purpose of designing compact, high-throughput and high efficiency optical devices. Nevertheless, the control of the propagation of the light becomes much harder in devices with smaller geometries mostly because of diffractions, loss mechanisms and fabrication difficulties. Furthermore, materials that are already available in the nature do not provide unprecedented optical properties for nanoscale optical applications. Due to this fact that fabrication of artificial materials is needed for utilizing novel and intriguing optical devices. For this purpose, some relatively new research fields have emerged like photonic crystals, metamaterials and high contrast gratings. We propose several designs based on aforementioned meta-structures to achieve compact and practically realizable optical devices. We presented compact optical demultiplexer, diode-like device and electro-optic modulator designs that are based on photonic crystals. We also proposed two circular polarizer designs based on metamaterials and high contrast gratings. Further, we investigated unidirectional transmission and polarization manipulation properties in chiral metamaterials. For most of the proposed designs, we also experimentally verified the numerical and theoretical findings. In conclusion, we can claim that the utilization of artifically structured materials give opportunity to realize the control of light much more easily in nanoscale designs.
Open Access
Hollow core photonic bandgap fibers for medical applications
(2009) Vural, Mert
The design, fabrication and characterization of photonic band gap (PBG) based optical polymer fibers is discussed. Unlike conventional total internal reflection (TIR) fibers, used primarily in telecommunications, PBG fibers can be made hollow core and can be used to guide infrared radiation of any wavelength, a property known as wavelength scalability. Since the electromagnetic radiation is transmitted in the hollow core of the fiber, the intrinsic absorption of the fiber core as well as the insertion Fresnel losses at front and end faces are avoided, giving rise to extraordinarily high power densities to be delivered. The fiber production line includes material characterization, and the design of nanoscale quarter wavestacks using common thermoplastic polymers (poly ether sulphone and poly ether imide) and chalcogenide glasses (As2S3, As2Se3, Ge15As25Se15Te45). The fiber preform is fabricated using rolling mechanism of thermally evaporated chalcogenide glasses on large area polymers. Subsequently, the fiber preforms are thermally drawn to obtain nano-structured PBG fibers.Two different fibers are designed and produced, signifying wavelength scalability of the overall process, for the widely used holmium (Ho:YAG) and carbon dioxide (CO2) medical lasers. The transmission characteristics of the fibers proved that they can be used to safely deliver 15Wlaser power, along a 3 meter fiber with external diameter of 1.5 mm and hollow core diameter of 0.5 mm, corresponding to a laser power density of 1kW/cm2 with a loss of -10dB/m. The PBG fibers are expected to be widely used in high precision surgical laser for incision, photoablation and coagulation where infrared radiation is the radiation of choice for its superior laser-tissue interaction properties.
Open Access
Physics and applications of coupled-cavity structures in photonic crystals
(2002) Bayındır, Mehmet
We proposed and demonstrated a new type of propagation mechanism for the electromagnetic waves in photonic band gap materials. Photons propagate through coupled cavities due to interaction between the highly localized neighboring cavity modes. We reported a novel waveguide, which we called coupled-cavity waveguide (CCW), in two- and three-dimensional photonic structures. By using CCWs, we demonstrated lossless and reflectionless waveguide bends, efficient power splitters, and photonic switches. We also experimentally observed the splitting of eigenmodes in coupled-cavities and formation of defect band due to interaction between the cavity modes. We reported the modification of spontaneous emission from hydrogenated amorphous silicon-nitride and silicon-oxide multilayers with coupled Fabry-Perot microcavities. We observed that the spontaneous emission rate is drastically enhanced at the coupledmicrocavity band edges due to very long photon lifetime. We also simulated our photonic structures by using the Transfer-Matrix-Method (TMM) and the Finite-Difference-Time-Domain (FDTD) method. The tight-binding (TB) approach, which was originally developped for the electronic structure calculations, is applied to the photonic structures, and compared to our experimental results. The measured results agree well with the simulations and the prediction of TB approximation. The excellent agreement between the measured, simulated, and the TB results is an indication of potential usage of TB approximation in photonic structures. Our achievements open up a new research area, namely physics and applications of coupled-cavities, in photonic structures. These results are very promising to construct for the future all-optical components on a single chip.
Open Access
Polymer / glass hollow-core photonic band gap fibers for infrared laser beam delivery
(2011) Köylü, Özlem
Photonic band gap fibers are proposed for the medical applications of laser light transmission into body. Conventional optical fibers guide light via total internal reflection. Due to light guiding mechanisms and materials they have limited frequency range, fiber flexibility and laser power. On the other hand, it is possible to scale operating wavelengths of PBG fibers just by changing a few parameters during fabrication process. Besides, hollow core of PBG fibers eliminates material absorptions and non-linearities during light guiding. PBG fiber production starts from material characterization; and selection; and continues with fiber design, thin film coating, preform preparation and fiber drawing. Studies on theoretical calculations and material properties have shown that best candidate materials for CO2 laser delivery are As2Se3 and poly-ethersulfone (PES). For this purpose, As2Se3 coated PES films are rolled to form a preform and consolidated before thermal drawing. Characterization of drawn fibers indicated that CO2 laser can be transmitted with loss levels of > 1 dB/m and 32 W output power is observed from a 1.2 m long fiber. After fabrication and characterization of PBG fibers, a prototype infrared laser system is built and tested on various applications. In our group laser tissue interactions are examined to see effectiveness of CO2 laser on tumor tissue. Experiments showed that tumor tissue is affected in a very distinctive way compared to healthy tissue. Absorption of cancerous lung tissue at CO2 laser wavelength (10.6 µm) is higher than absorption of healthy tissue at the same wavelength. This study proposes a wide use of PBG fiber for not just CO2 lasers, but also other laser systems used in different medical operations, such as Ho:YAG lasers. PBG fibers for high power laser delivery are novel structures for fast, painless and bloodless surgeries.
Open Access
Waveguiding of electromagnetic waves and investigation of negative phase velocity in photonic crystals and metamaterials
(2012) Çolak, İlyas Evrim
Electromagnetic wave propagation is characterized in periodic dielectric and metallic structures: Photonic Crystals (PCs) and Metamaterials, respectively. The applications of these structures are demonstrated in the Microwave regime. In the first application, Graded Index (GRIN) PC is used to focus the incoming waves into a small spot. Speaking in terms of PC period a, for an incident beam with Full Width Half Maximum of 9.20a the power of the focusing behavior is quantified by looking at the spot size conversion ratio, which is around 3.9. PCs can act as an efficient input coupler for the PC Waveguide (PCW). The GRIN PC has been experimentally shown to yield a coupling efficiency of 5 dB over the single PCW at 18 GHz. This method can be applied to provide a solution for the input coupling losses between PC structures and other lightwave circuits. PCs can also be used to achieve dual-bandpass and bandstop spatial filtering by proper adjustments of the lattice parameters and the frequency range. For the plane-wave excitation, a wideband spatial filtering is shown to exist due to the specific Fabry-Perot type resonances, which are nearly independent on the angle of incidence. The effect of the finite angular distribution of the Gaussian-beam excitation is also demonstrated. The spatial filtering in the incidence and observation angle domains has been discussed both numerically and experimentally for the non-plane-wave excitations under the light of calculated iso-frequency contours. In addition to bandstop characteristics, the dispersion relation of the PCs can be modified with the proper arrangement, namely by employment of the dimer layer. This surface layer supports the surface waves and serves like a waveguide for the electromagnetic waves. At higher frequencies above the lightline, surface waves radiate into air in the form of backward leaky waves and frequency dependent steering is reported from 0 º to 70º for the outgoing beam. The leaky wave behavior and backward radiation is similar to that is seen in Left-Handed (LH) Metamaterials. Metallic fishnet layers are used to demonstrate negative refractive index (NRI) in conjunction with the left-handed behavior in this class of metamaterial. A wedge structure formed by fishnet layers is used to measure the NRI which was also verified by the retrieval analysis. The limits of homogenization are discussed. The dependence of the LH properties on the fishnet parameters is investigated parametrically. For example, the NRI changes from -1.8 to -1.3 as the interseperation distance of the layers varies from as=λ/10.5 (2mm) to as=λ/4.2 (4mm) at magnetic resonance frequency around 14.3 GHz (ωm). It is also shown that the fishnet layers behave as an LC resonator as well as a TEM waveguide and a 1D transmission line at ωm.