Browsing by Subject "Cellulose Acetate"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Open Access Fabrication of cellulose acetate/polybenzoxazine cross-linked electrospun nanofibrous membrane for water treatment(Elsevier, 2017-12) Ertaş, Yelda; Uyar, TamerHerein, polybenzoxazine based cross-linked cellulose acetate nanofibrous membrane exhibiting enhanced thermal/mechanical properties and improved adsorption efficiency was successfully produced via electrospinning and thermal curing. Initially, suitable solution composition was determined by varying the amount of the benzoxazine (BA-a) resin, cellulose acetate (CA) and citric acid (CTR) to obtain uniform nanofibrous membrane via electrospinning. Subsequently, thermal curing was performed by step-wise at 150, 175, 200 and 225 °C to obtain cross-linked composite nanofibrous membranes. SEM images and solubility experiments demonstrated that most favorable result was obtained from the 10% (w/v) CA, 5% (w/v) BA-a and 1% (w/v) CTR composition and cross-linked nanofibrous membrane (CA10/PolyBA-a5/CTR1) was obtained after the thermal curing. Chemical structural changes (ring opening) occurred by thermal curing revealed successful cross-linking of BA-a in the composite nanofibrous membrane. Thermal, mechanical and adsorption performance of pristine CA and CA10/PolyBA-a5/CTR1 nanofibrous membranes were studied. Char yield of the pristine CA nanofibrous membrane has increased notably from 12 to 24.7% for composite CA10/PolyBA-a5/CTR1 membrane. When compared to pristine CA membrane, CA10/PolyBA-a5/CTR1 nanofibrous membrane has shown superior mechanical properties having tensile strength and Young's modulus of 8.64 ± 0.63 MPa and 213.87 ± 30.79 MPa, respectively. Finally, adsorption performance of pristine CA and CA10/PolyBA-a5/CTR1 nanofibrous membranes was examined by a model polycyclic aromatic hydrocarbon (PAH) compound (i.e. phenanthrene) in aqueous solution, in which CA10/PolyBA-a5/CTR1 nanofibrous membrane has shown better removal efficiency (98.5%) and adsorption capacity (592 μg/g).Item Open Access “Nanotraps” in porous electrospun fibers for effective removal of lead(II) in water(Royal Society of Chemistry, 2016-02) Senthamizhan A.; Balusamy, B.; Celebioglu A.; Uyar, TamerHere, we have put in conscientious effort to demonstrate the careful design of binding sites in fibers and their stability for enhanced adsorption of metal ions, which has proven to be a challenging task until now. Dithiothreitol capped gold nanoclusters (AuNCs) are successfully encapsulated into a cavity in the form of pores in electrospun porous cellulose acetate fibers (pCAFs) and their assembly creates a "nanotrap" for effective capture of Pb2+. The enhanced immobilization capacity of AuNCs into the interiors of the fibers and their non-aggregated nature offer enhanced adsorption sites, thus reaching maximum extraction capacity up to 1587 mg g-1 for Pb2+. The remarkable finding from this approach has shown that the diffusion of Pb2+ into the interiors of the AuNC encapsulated porous cellulose acetate fiber (pCAF/AuNC) is in line with the penetration depth of AuNCs. The effectiveness of the pCAF/AuNC has been compared with that of the AuNC decorated non-porous cellulose acetate fibers (nCAF/AuNC). The findings have shown a remarkable improvement in the adsorption efficiency by increasing the availability and stability of adsorption sites in the pCAF/AuNC. We strongly believe that the proposed approach might provide a new insight into developing nanotraps to eliminate the usual limitations including denaturation of adsorbents on supported matrices. © The Royal Society of Chemistry 2016.Item Open Access Superhydrophobic, hybrid, electrospun cellulose acetate nanofibrous mats for oil/water separation by tailored surface modification(American Chemical Society, 2016) Arslan, O.; Aytac Z.; Uyar, TamerElectrospun cellulose acetate nanofibers (CA-NF) have been modified with perfluoro alkoxysilanes (FS/CA-NF) for tailoring their chemical and physical features aiming oil-water separation purposes. Strikingly, hybrid FS/CA-NF showed that perfluoro groups are rigidly positioned on the outer surface of the nanofibers providing superhydrophobic characteristic with a water contact angle of ∼155°. Detailed analysis showed that hydrolysis/condensation reactions led to the modification of the acetylated β(1 → 4) linked d-glucose chains of CA transforming it into a superhydrophobic nanofibrous mat. Analytical data have revealed that CA-NF surfaces can be selectively controlled for fabricating the durable, robust and water resistant hybrid electrospun nanofibrous mat. The -OH groups available on the CA structure allowed the basic sol-gel reactions started by the reactive FS hybrid precursor system which can be monitored by spectroscopic analysis. Since alkoxysilane groups on the perfluoro silane compound are capable of reacting for condensation together with the CA, superhydrophobic nanofibrous mat is obtained via electrospinning. This structural modification led to the facile fabrication of the novel oil/water nanofibrous separator which functions effectively demonstrated by hexane/oil and water separation experiments. Perfluoro groups consequently modified the hydrophilic CA nanofibers into superhydrophobic character and therefore FS/CA-NF could be quite practical for future applications like water/oil separators, as well as self-cleaning or water resistant nanofibrous structures.