Browsing by Subject "Antenna measurements"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Three dimensional microfabricated broadband patch and multifunction reconfigurable antennae for 60 GHz applications
    (IEEE, 2015-04) Hünerli H. V.; Mopidevi, H.; Cağatay, E.; Imbert, M.; Romeu, J.; Jofre, L.; Çetiner, B. A.; Bıyıklı, Necmi
    In this paper we present two antenna designs capable of covering the IEEE 802.11ad (WiGig) frequency band (57-66 GHz and 59-66 GHz respectively). The work below reports the design, microfabrication and characterization of a broadband patch antenna along with the design and microfabrication of multifunction reconfigurable antenna (MRA) in its static form excluding active switching. The first design is a patch antenna where the energy is coupled with a conductor-backed (CB) coplanar waveguide (CPW)-fed loop slot, resulting in a broad bandwidth. The feed circuitry along with the loop is formed on a quartz substrate (at 60 GHz), on top of which an SU-8-based three-dimensional (3D) structure with air cavities is microfabricated. The patch metallization is deposited on top of this structure. The second design is a CB CPW-fed loop slot coupled patch antenna with a parasitic layer on top. The feed circuitry along with the loop is formed on a quartz substrate. On top, the patch metallization is patterned on another quartz substrate. The parasitic pixels are deposited on top of these two quartz layers on top of an SU-8 based 3D structure with air cavities. © 2015 EurAAP.
  • Thumbnail Image
    ItemOpen Access
    Three-dimensional microfabricated broadband patch antenna for WiGig applications.
    (Institute of Electrical and Electronics Engineers, 2014) Mopidevi, H.; Hunerli, H. V.; Cagatay, E.; Bıyıklı, Necmi; Imbert, M.; Romeu, J.; Jofre, L.; Cetiner, B. A.
    The design, microfabrication, and characterization of a broadband patch antenna capable of covering the entire IEEE 802.11ad (WiGig) frequency band (57-66 GHz) are presented in this letter. A conductor-backed (CB) coplanar waveguide (CPW)-fed loop slot couples the energy to the patch antenna, resulting in a broad bandwidth. The feed circuitry along with the loop is formed on a quartz substrate (\varepsilon-{\rm r} = 3.9, \tan \delta = 0.0002 at 60 GHz), on top of which an SU-8-based three-dimensional (3-D) structure with air cavities is microfabricated. The patch metallization is deposited on top of this 3-D structure. While the main role of the structure made out of SU-8 material is to provide a mechanical support for the patch metallization, the antenna takes advantage of the air cavities underneath, thus resulting in an antenna substrate with a very low loss. This, in turn, improves the overall antenna performances. The simulated and measured impedance characteristics agree well, showing {\sim}15\hbox{\%} bandwidth. Also, the radiation pattern results demonstrate the integrity of radiation pattern with reasonably constant gain values (average {\sim}6.4~dB) in the broadside direction over the entire WiGig band. © 2002-2011 IEEE.